From 06df4664a928c5b6de78e6ccd28499a4589d80f8 Mon Sep 17 00:00:00 2001
From: Freddie Chopin <freddie_chopin@op.pl>
Date: Fri, 21 May 2010 17:46:40 +0200
Subject: LPC23xx and LPC24xx after reset run on internal 4MHz RC oscillator,
 so "flash bank" parameter should be 4000 (not 12000)

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
---
 tcl/target/lpc2478.cfg | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg
index 950ef63f..57aa36fd 100644
--- a/tcl/target/lpc2478.cfg
+++ b/tcl/target/lpc2478.cfg
@@ -44,7 +44,7 @@ $_TARGETNAME configure -event reset-init {
 # After reset the chip uses its internal 4MHz RC oscillator.
 # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum
+flash bank $_FLASHNAME lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum
 
 # Try to use RCLK, if RCLK is not available use "normal" mode. 4MHz / 6 = 666kHz, so use 500.
 jtag_rclk 500
-- 
cgit v1.2.3