From 1892a2b51009fb15bb1c2c7b10c125d671a5c3bf Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Mon, 22 Nov 2010 12:25:09 +0800 Subject: FLASH/NOR: Rename spearsmi.c to stmsmi.c Signed-off-by: Antonio Borneo --- src/flash/nor/Makefile.am | 2 +- src/flash/nor/spearsmi.c | 747 ---------------------------------------------- src/flash/nor/stmsmi.c | 747 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 748 insertions(+), 748 deletions(-) delete mode 100644 src/flash/nor/spearsmi.c create mode 100644 src/flash/nor/stmsmi.c diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am index e281c22b..e1028ff9 100644 --- a/src/flash/nor/Makefile.am +++ b/src/flash/nor/Makefile.am @@ -21,7 +21,7 @@ NOR_DRIVERS = \ non_cfi.c \ ocl.c \ pic32mx.c \ - spearsmi.c \ + stmsmi.c \ stellaris.c \ stm32x.c \ str7x.c \ diff --git a/src/flash/nor/spearsmi.c b/src/flash/nor/spearsmi.c deleted file mode 100644 index c9a16726..00000000 --- a/src/flash/nor/spearsmi.c +++ /dev/null @@ -1,747 +0,0 @@ -/*************************************************************************** - * Copyright (C) 2010 by Antonio Borneo * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - ***************************************************************************/ - -/* STM Serial Memory Interface (SMI) controller is a SPI bus controller - * specifically designed for SPI memories. - * Only SPI "mode 3" (CPOL=1 and CPHA=1) is supported. - * Two working modes are available: - * - SW mode: the SPI is controlled by SW. Any custom commands can be sent - * on the bus. - * - HW mode: the SPI but is under SMI control. Memory content is directly - * accessible in CPU memory space. CPU can read, write and execute memory - * content. */ - -/* ATTENTION: - * To have flash memory mapped in CPU memory space, the SMI controller - * have to be in "HW mode". This requires following constraints: - * 1) The command "reset init" have to initialize SMI controller and put - * it in HW mode; - * 2) every command in this file have to return to prompt in HW mode. */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "imp.h" -#include -#include - -#define SMI_READ_REG(a) (_SMI_READ_REG(a)) -#define _SMI_READ_REG(a) \ -{ \ - int __a; \ - uint32_t __v; \ - \ - __a = target_read_u32(target, io_base + (a), &__v); \ - if (__a != ERROR_OK) \ - return __a; \ - __v; \ -} - -#define SMI_WRITE_REG(a,v) \ -{ \ - int __r; \ - \ - __r = target_write_u32(target, io_base + (a), (v)); \ - if (__r != ERROR_OK) \ - return __r; \ -} - -#define SMI_POLL_TFF(timeout) \ -{ \ - int __r; \ - \ - __r = poll_tff(target, io_base, timeout); \ - if (__r != ERROR_OK) \ - return __r; \ -} - -#define SMI_SET_SW_MODE() SMI_WRITE_REG(SMI_CR1, \ - SMI_READ_REG(SMI_CR1) | SMI_SW_MODE) -#define SMI_SET_HWWB_MODE() SMI_WRITE_REG(SMI_CR1, \ - (SMI_READ_REG(SMI_CR1) | SMI_WB_MODE) & ~SMI_SW_MODE) -#define SMI_SET_HW_MODE() SMI_WRITE_REG(SMI_CR1, \ - SMI_READ_REG(SMI_CR1) & ~(SMI_SW_MODE | SMI_WB_MODE)) -#define SMI_CLEAR_TFF() SMI_WRITE_REG(SMI_SR, ~SMI_TFF) - -#define SMI_BANK_SIZE (0x01000000) - -#define SMI_CR1 (0x00) /* Control register 1 */ -#define SMI_CR2 (0x04) /* Control register 2 */ -#define SMI_SR (0x08) /* Status register */ -#define SMI_TR (0x0c) /* TX */ -#define SMI_RR (0x10) /* RX */ - -/* fields in SMI_CR1 */ -#define SMI_SW_MODE 0x10000000 /* set to enable SW Mode */ -#define SMI_WB_MODE 0x20000000 /* Write Burst Mode */ - -/* fields in SMI_CR2 */ -#define SMI_TX_LEN_1 0x00000001 /* data length = 1 byte */ -#define SMI_TX_LEN_4 0x00000004 /* data length = 4 byte */ -#define SMI_RX_LEN_3 0x00000030 /* data length = 3 byte */ -#define SMI_SEND 0x00000080 /* Send data */ -#define SMI_RSR 0x00000400 /* reads status reg */ -#define SMI_WE 0x00000800 /* Write Enable */ -#define SMI_SEL_BANK0 0x00000000 /* Select Bank0 */ -#define SMI_SEL_BANK1 0x00001000 /* Select Bank1 */ -#define SMI_SEL_BANK2 0x00002000 /* Select Bank2 */ -#define SMI_SEL_BANK3 0x00003000 /* Select Bank3 */ - -/* fields in SMI_SR */ -#define SMI_WIP_BIT 0x00000001 /* WIP Bit of SPI SR on SMI SR */ -#define SMI_WEL_BIT 0x00000002 /* WEL Bit of SPI SR on SMI SR */ -#define SMI_TFF 0x00000100 /* Transfer Finished Flag */ - -/* Commands */ -#define SMI_READ_ID 0x0000009F /* Read Flash Identification */ - -/* Timeout in ms */ -#define SMI_CMD_TIMEOUT (100) -#define SMI_PROBE_TIMEOUT (100) -#define SMI_MAX_TIMEOUT (3000) - -struct stmsmi_flash_bank -{ - int probed; - uint32_t io_base; - uint32_t bank_num; - struct flash_device *dev; -}; - -/* data structure to maintain flash ids from different vendors */ -struct flash_device { - char *name; - uint8_t erase_cmd; - uint32_t device_id; - uint32_t pagesize; - unsigned long sectorsize; - unsigned long size_in_bytes; -}; - -#define FLASH_ID(n, es, id, psize, ssize, size) \ -{ \ - .name = n, \ - .erase_cmd = es, \ - .device_id = id, \ - .pagesize = psize, \ - .sectorsize = ssize, \ - .size_in_bytes = size \ -} - -/* List below is taken from Linux driver. It is not exhaustive of all the - * possible SPI memories, nor exclusive for SMI. Could be shared with - * other SPI drivers. */ -static struct flash_device flash_devices[] = { - /* name, erase_cmd, device_id, pagesize, sectorsize, size_in_bytes */ - FLASH_ID("st m25p05", 0xd8, 0x00102020, 0x80, 0x8000, 0x10000), - FLASH_ID("st m25p10", 0xd8, 0x00112020, 0x80, 0x8000, 0x20000), - FLASH_ID("st m25p20", 0xd8, 0x00122020, 0x100, 0x10000, 0x40000), - FLASH_ID("st m25p40", 0xd8, 0x00132020, 0x100, 0x10000, 0x80000), - FLASH_ID("st m25p80", 0xd8, 0x00142020, 0x100, 0x10000, 0x100000), - FLASH_ID("st m25p16", 0xd8, 0x00152020, 0x100, 0x10000, 0x200000), - FLASH_ID("st m25p32", 0xd8, 0x00162020, 0x100, 0x10000, 0x400000), - FLASH_ID("st m25p64", 0xd8, 0x00172020, 0x100, 0x10000, 0x800000), - FLASH_ID("st m25p128", 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000), - FLASH_ID("st m45pe10", 0xd8, 0x00114020, 0x100, 0x10000, 0x20000), - FLASH_ID("st m45pe20", 0xd8, 0x00124020, 0x100, 0x10000, 0x40000), - FLASH_ID("st m45pe40", 0xd8, 0x00134020, 0x100, 0x10000, 0x80000), - FLASH_ID("st m45pe80", 0xd8, 0x00144020, 0x100, 0x10000, 0x100000), - FLASH_ID("sp s25fl004", 0xd8, 0x00120201, 0x100, 0x10000, 0x80000), - FLASH_ID("sp s25fl008", 0xd8, 0x00130201, 0x100, 0x10000, 0x100000), - FLASH_ID("sp s25fl016", 0xd8, 0x00140201, 0x100, 0x10000, 0x200000), - FLASH_ID("sp s25fl032", 0xd8, 0x00150201, 0x100, 0x10000, 0x400000), - FLASH_ID("sp s25fl064", 0xd8, 0x00160201, 0x100, 0x10000, 0x800000), - FLASH_ID("atmel 25f512", 0x52, 0x0065001f, 0x80, 0x8000, 0x10000), - FLASH_ID("atmel 25f1024", 0x52, 0x0060001f, 0x100, 0x8000, 0x20000), - FLASH_ID("atmel 25f2048", 0x52, 0x0063001f, 0x100, 0x10000, 0x40000), - FLASH_ID("atmel 25f4096", 0x52, 0x0064001f, 0x100, 0x10000, 0x80000), - FLASH_ID("atmel 25fs040", 0xd7, 0x0004661f, 0x100, 0x10000, 0x80000), - FLASH_ID("mac 25l512", 0xd8, 0x001020c2, 0x010, 0x10000, 0x10000), - FLASH_ID("mac 25l1005", 0xd8, 0x001120c2, 0x010, 0x10000, 0x20000), - FLASH_ID("mac 25l2005", 0xd8, 0x001220c2, 0x010, 0x10000, 0x40000), - FLASH_ID("mac 25l4005", 0xd8, 0x001320c2, 0x010, 0x10000, 0x80000), - FLASH_ID("mac 25l8005", 0xd8, 0x001420c2, 0x010, 0x10000, 0x100000), - FLASH_ID("mac 25l1605", 0xd8, 0x001520c2, 0x100, 0x10000, 0x200000), - FLASH_ID("mac 25l3205", 0xd8, 0x001620c2, 0x100, 0x10000, 0x400000), - FLASH_ID("mac 25l6405", 0xd8, 0x001720c2, 0x100, 0x10000, 0x800000), - FLASH_ID(NULL, 0, 0, 0, 0, 0) -}; - -struct stmsmi_target { - char *name; - uint32_t tap_idcode; - uint32_t smi_base; - uint32_t io_base; -}; - -static struct stmsmi_target target_devices[] = { - /* name, tap_idcode, smi_base, io_base */ - { "SPEAr3xx/6xx", 0x07926041, 0xf8000000, 0xfc000000 }, - { "STR75x", 0x4f1f0041, 0x80000000, 0x90000000 }, - { NULL, 0, 0, 0 } -}; - -FLASH_BANK_COMMAND_HANDLER(stmsmi_flash_bank_command) -{ - struct stmsmi_flash_bank *stmsmi_info; - - LOG_DEBUG(__FUNCTION__); - - if (CMD_ARGC < 6) - { - LOG_WARNING("incomplete flash_bank stmsmi configuration"); - return ERROR_FLASH_BANK_INVALID; - } - - stmsmi_info = malloc(sizeof(struct stmsmi_flash_bank)); - if (stmsmi_info == NULL) - { - LOG_ERROR("not enough memory"); - return ERROR_FAIL; - } - - bank->driver_priv = stmsmi_info; - stmsmi_info->probed = 0; - - return ERROR_OK; -} - -/* Poll transmit finished flag */ -/* timeout in ms */ -static int poll_tff(struct target *target, uint32_t io_base, int timeout) -{ - long long endtime; - - if (SMI_READ_REG(SMI_SR) & SMI_TFF) - return ERROR_OK; - - endtime = timeval_ms() + timeout; - do { - alive_sleep(1); - if (SMI_READ_REG(SMI_SR) & SMI_TFF) - return ERROR_OK; - } while (timeval_ms() < endtime); - - LOG_ERROR("Timeout while polling TFF"); - return ERROR_FLASH_OPERATION_FAILED; -} - -/* Read the status register of the external SPI flash chip. - * The operation is triggered by setting SMI_RSR bit. - * SMI sends the proper SPI command (0x05) and returns value in SMI_SR */ -static int read_status_reg(struct flash_bank *bank, uint32_t *status) -{ - struct target *target = bank->target; - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - uint32_t io_base = stmsmi_info->io_base; - - /* clear transmit finished flag */ - SMI_CLEAR_TFF(); - - /* Read status */ - SMI_WRITE_REG(SMI_CR2, stmsmi_info->bank_num | SMI_RSR); - - /* Poll transmit finished flag */ - SMI_POLL_TFF(SMI_CMD_TIMEOUT); - - /* clear transmit finished flag */ - SMI_CLEAR_TFF(); - - *status = SMI_READ_REG(SMI_SR) & 0x0000ffff; - - /* clean-up SMI_CR2 */ - SMI_WRITE_REG(SMI_CR2, 0); /* AB: Required ? */ - - return ERROR_OK; -} - -/* check for WIP (write in progress) bit in status register */ -/* timeout in ms */ -static int wait_till_ready(struct flash_bank *bank, int timeout) -{ - uint32_t status; - int retval; - long long endtime; - - endtime = timeval_ms() + timeout; - do { - /* read flash status register */ - retval = read_status_reg(bank, &status); - if (retval != ERROR_OK) - return retval; - - if ((status & SMI_WIP_BIT) == 0) - return ERROR_OK; - alive_sleep(1); - } while (timeval_ms() < endtime); - - LOG_ERROR("timeout"); - return ERROR_FAIL; -} - -/* Send "write enable" command to SPI flash chip. - * The operation is triggered by setting SMI_WE bit, and SMI sends - * the proper SPI command (0x06) */ -static int smi_write_enable(struct flash_bank *bank) -{ - struct target *target = bank->target; - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - uint32_t io_base = stmsmi_info->io_base; - uint32_t status; - int retval; - - /* Enter in HW mode */ - SMI_SET_HW_MODE(); /* AB: is this correct ?*/ - - /* clear transmit finished flag */ - SMI_CLEAR_TFF(); - - /* Send write enable command */ - SMI_WRITE_REG(SMI_CR2, stmsmi_info->bank_num | SMI_WE); - - /* Poll transmit finished flag */ - SMI_POLL_TFF(SMI_CMD_TIMEOUT); - - /* read flash status register */ - retval = read_status_reg(bank, &status); - if (retval != ERROR_OK) - return retval; - - /* Check write enabled */ - if ((status & SMI_WEL_BIT) == 0) - { - LOG_ERROR("Cannot enable write to flash. Status=0x%08" PRIx32, status); - return ERROR_FAIL; - } - - return ERROR_OK; -} - -static uint32_t erase_command(struct stmsmi_flash_bank *stmsmi_info, - uint32_t offset) -{ - union { - uint32_t command; - uint8_t x[4]; - } cmd; - - cmd.x[0] = stmsmi_info->dev->erase_cmd; - cmd.x[1] = offset >> 16; - cmd.x[2] = offset >> 8; - cmd.x[3] = offset; - - return cmd.command; -} - -static int smi_erase_sector(struct flash_bank *bank, int sector) -{ - struct target *target = bank->target; - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - uint32_t io_base = stmsmi_info->io_base; - uint32_t cmd; - int retval; - - retval = smi_write_enable(bank); - if (retval != ERROR_OK) - return retval; - - /* Switch to SW mode to send sector erase command */ - SMI_SET_SW_MODE(); - - /* clear transmit finished flag */ - SMI_CLEAR_TFF(); - - /* send SPI command "block erase" */ - cmd = erase_command(stmsmi_info, bank->sectors[sector].offset); - SMI_WRITE_REG(SMI_TR, cmd); - SMI_WRITE_REG(SMI_CR2, stmsmi_info->bank_num | SMI_SEND | SMI_TX_LEN_4); - - /* Poll transmit finished flag */ - SMI_POLL_TFF(SMI_CMD_TIMEOUT); - - /* poll WIP for end of self timed Sector Erase cycle */ - retval = wait_till_ready(bank, SMI_MAX_TIMEOUT); - if (retval != ERROR_OK) - return retval; - - return ERROR_OK; -} - -static int stmsmi_erase(struct flash_bank *bank, int first, int last) -{ - struct target *target = bank->target; - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - uint32_t io_base = stmsmi_info->io_base; - int retval = ERROR_OK; - int sector; - - LOG_DEBUG("%s: from sector %d to sector %d", __FUNCTION__, first, last); - - if (target->state != TARGET_HALTED) - { - LOG_ERROR("Target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - - if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { - LOG_ERROR("Flash sector invalid"); - return ERROR_FLASH_SECTOR_INVALID; - } - - if (!(stmsmi_info->probed)) - { - LOG_ERROR("Flash bank not probed"); - return ERROR_FLASH_BANK_NOT_PROBED; - } - - for (sector = first; sector <= last; sector++) - { - if (bank->sectors[sector].is_protected) - { - LOG_ERROR("Flash sector %d protected", sector); - return ERROR_FAIL; - } - } - - for (sector = first; sector <= last; sector++) - { - retval = smi_erase_sector(bank, sector); - if (retval != ERROR_OK) - break; - keep_alive(); - } - - /* Switch to HW mode before return to prompt */ - SMI_SET_HW_MODE(); - return retval; -} - -static int stmsmi_protect(struct flash_bank *bank, int set, - int first, int last) -{ - int sector; - - for (sector = first; sector <= last; sector++) - bank->sectors[sector].is_protected = set; - return ERROR_OK; -} - -static int smi_write_buffer(struct flash_bank *bank, uint8_t *buffer, - uint32_t address, uint32_t len) -{ - struct target *target = bank->target; - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - uint32_t io_base = stmsmi_info->io_base; - int retval; - - LOG_DEBUG("%s: address=0x%08" PRIx32 " len=0x%08" PRIx32, - __FUNCTION__, address, len); - - retval = smi_write_enable(bank); - if (retval != ERROR_OK) - return retval; - - /* HW mode, write burst mode */ - SMI_SET_HWWB_MODE(); - - retval = target_write_buffer(target, address, len, buffer); - if (retval != ERROR_OK) - return retval; - - return ERROR_OK; -} - -static int stmsmi_write(struct flash_bank *bank, uint8_t *buffer, - uint32_t offset, uint32_t count) -{ - struct target *target = bank->target; - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - uint32_t io_base = stmsmi_info->io_base; - uint32_t cur_count, page_size, page_offset; - int sector; - int retval = ERROR_OK; - - LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32, - __FUNCTION__, offset, count); - - if (target->state != TARGET_HALTED) - { - LOG_ERROR("Target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - - if (offset + count > stmsmi_info->dev->size_in_bytes) - { - LOG_WARNING("Write pasts end of flash. Extra data discarded."); - count = stmsmi_info->dev->size_in_bytes - offset; - } - - /* Check sector protection */ - for (sector = 0; sector < bank->num_sectors; sector++) - { - /* Start offset in or before this sector? */ - /* End offset in or behind this sector? */ - if ( (offset < - (bank->sectors[sector].offset + bank->sectors[sector].size)) - && ((offset + count - 1) >= bank->sectors[sector].offset) - && bank->sectors[sector].is_protected ) - { - LOG_ERROR("Flash sector %d protected", sector); - return ERROR_FAIL; - } - } - - page_size = stmsmi_info->dev->pagesize; - - /* unaligned buffer head */ - if (count > 0 && (offset & 3) != 0) - { - cur_count = 4 - (offset & 3); - if (cur_count > count) - cur_count = count; - retval = smi_write_buffer(bank, buffer, bank->base + offset, - cur_count); - if (retval != ERROR_OK) - goto err; - offset += cur_count; - buffer += cur_count; - count -= cur_count; - } - - page_offset = offset % page_size; - /* central part, aligned words */ - while (count >= 4) - { - /* clip block at page boundary */ - if (page_offset + count > page_size) - cur_count = page_size - page_offset; - else - cur_count = count & ~3; - - retval = smi_write_buffer(bank, buffer, bank->base + offset, - cur_count); - if (retval != ERROR_OK) - goto err; - - page_offset = 0; - buffer += cur_count; - offset += cur_count; - count -= cur_count; - - keep_alive(); - } - - /* buffer tail */ - if (count > 0) - retval = smi_write_buffer(bank, buffer, bank->base + offset, count); - -err: - /* Switch to HW mode before return to prompt */ - SMI_SET_HW_MODE(); - return retval; -} - -/* Return ID of flash device */ -/* On exit, SW mode is kept */ -static int read_flash_id(struct flash_bank *bank, uint32_t *id) -{ - struct target *target = bank->target; - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - uint32_t io_base = stmsmi_info->io_base; - int retval; - - if (target->state != TARGET_HALTED) - { - LOG_ERROR("Target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - - /* poll WIP */ - retval = wait_till_ready(bank, SMI_PROBE_TIMEOUT); - if (retval != ERROR_OK) - return retval; - - /* enter in SW mode */ - SMI_SET_SW_MODE(); - - /* clear transmit finished flag */ - SMI_CLEAR_TFF(); - - /* Send SPI command "read ID" */ - SMI_WRITE_REG(SMI_TR, SMI_READ_ID); - SMI_WRITE_REG(SMI_CR2, - stmsmi_info->bank_num | SMI_SEND | SMI_RX_LEN_3 | SMI_TX_LEN_1); - - /* Poll transmit finished flag */ - SMI_POLL_TFF(SMI_CMD_TIMEOUT); - - /* clear transmit finished flag */ - SMI_CLEAR_TFF(); - - /* read ID from Receive Register */ - *id = SMI_READ_REG(SMI_RR) & 0x00ffffff; - return ERROR_OK; -} - -static int stmsmi_probe(struct flash_bank *bank) -{ - struct target *target = bank->target; - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - uint32_t io_base; - struct flash_sector *sectors; - uint32_t id = 0; /* silence uninitialized warning */ - struct stmsmi_target *target_device; - int retval; - - if (stmsmi_info->probed) - free(bank->sectors); - stmsmi_info->probed = 0; - - for (target_device=target_devices ; target_device->name ; ++target_device) - if (target_device->tap_idcode == target->tap->idcode) - break; - if (!target_device->name) - { - LOG_ERROR("Device ID 0x%" PRIx32 " is not known as SMI capable", - target->tap->idcode); - return ERROR_FAIL; - } - - switch (bank->base - target_device->smi_base) - { - case 0: - stmsmi_info->bank_num = SMI_SEL_BANK0; - break; - case SMI_BANK_SIZE: - stmsmi_info->bank_num = SMI_SEL_BANK1; - break; - case 2*SMI_BANK_SIZE: - stmsmi_info->bank_num = SMI_SEL_BANK2; - break; - case 3*SMI_BANK_SIZE: - stmsmi_info->bank_num = SMI_SEL_BANK3; - break; - default: - LOG_ERROR("Invalid SMI base address 0x%" PRIx32, bank->base); - return ERROR_FAIL; - } - io_base = target_device->io_base; - stmsmi_info->io_base = io_base; - - LOG_DEBUG("Valid SMI on device %s at address 0x%" PRIx32, - target_device->name, bank->base); - - /* read and decode flash ID; returns in SW mode */ - retval = read_flash_id(bank, &id); - SMI_SET_HW_MODE(); - if (retval != ERROR_OK) - return retval; - - stmsmi_info->dev = NULL; - for (struct flash_device *p = flash_devices; p->name ; p++) - if (p->device_id == id) { - stmsmi_info->dev = p; - break; - } - - if (!stmsmi_info->dev) - { - LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id); - return ERROR_FAIL; - } - - LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")", - stmsmi_info->dev->name, stmsmi_info->dev->device_id); - - /* Set correct size value */ - bank->size = stmsmi_info->dev->size_in_bytes; - - /* create and fill sectors array */ - bank->num_sectors = - stmsmi_info->dev->size_in_bytes / stmsmi_info->dev->sectorsize; - sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); - if (sectors == NULL) - { - LOG_ERROR("not enough memory"); - return ERROR_FAIL; - } - - for (int sector = 0; sector < bank->num_sectors; sector++) - { - sectors[sector].offset = sector * stmsmi_info->dev->sectorsize; - sectors[sector].size = stmsmi_info->dev->sectorsize; - sectors[sector].is_erased = -1; - sectors[sector].is_protected = 1; - } - - bank->sectors = sectors; - stmsmi_info->probed = 1; - return ERROR_OK; -} - -static int stmsmi_auto_probe(struct flash_bank *bank) -{ - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - if (stmsmi_info->probed) - return ERROR_OK; - return stmsmi_probe(bank); -} - -static int stmsmi_protect_check(struct flash_bank *bank) -{ - /* Nothing to do. Protection is only handled in SW. */ - return ERROR_OK; -} - -static int get_stmsmi_info(struct flash_bank *bank, char *buf, int buf_size) -{ - struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - int printed; - - if (!(stmsmi_info->probed)) - { - printed = snprintf(buf, buf_size, - "\nSMI flash bank not probed yet\n"); - return ERROR_OK; - } - - printed = snprintf(buf, buf_size, "\nSMI flash information:\n" - " Device \'%s\' (ID 0x%08x)\n", - stmsmi_info->dev->name, stmsmi_info->dev->device_id); - buf += printed; - buf_size -= printed; - - return ERROR_OK; -} - -struct flash_driver stmsmi_flash = { - .name = "stmsmi", - .flash_bank_command = stmsmi_flash_bank_command, - .erase = stmsmi_erase, - .protect = stmsmi_protect, - .write = stmsmi_write, - .read = default_flash_read, - .probe = stmsmi_probe, - .auto_probe = stmsmi_auto_probe, - .erase_check = default_flash_blank_check, - .protect_check = stmsmi_protect_check, - .info = get_stmsmi_info, -}; diff --git a/src/flash/nor/stmsmi.c b/src/flash/nor/stmsmi.c new file mode 100644 index 00000000..c9a16726 --- /dev/null +++ b/src/flash/nor/stmsmi.c @@ -0,0 +1,747 @@ +/*************************************************************************** + * Copyright (C) 2010 by Antonio Borneo * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +/* STM Serial Memory Interface (SMI) controller is a SPI bus controller + * specifically designed for SPI memories. + * Only SPI "mode 3" (CPOL=1 and CPHA=1) is supported. + * Two working modes are available: + * - SW mode: the SPI is controlled by SW. Any custom commands can be sent + * on the bus. + * - HW mode: the SPI but is under SMI control. Memory content is directly + * accessible in CPU memory space. CPU can read, write and execute memory + * content. */ + +/* ATTENTION: + * To have flash memory mapped in CPU memory space, the SMI controller + * have to be in "HW mode". This requires following constraints: + * 1) The command "reset init" have to initialize SMI controller and put + * it in HW mode; + * 2) every command in this file have to return to prompt in HW mode. */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "imp.h" +#include +#include + +#define SMI_READ_REG(a) (_SMI_READ_REG(a)) +#define _SMI_READ_REG(a) \ +{ \ + int __a; \ + uint32_t __v; \ + \ + __a = target_read_u32(target, io_base + (a), &__v); \ + if (__a != ERROR_OK) \ + return __a; \ + __v; \ +} + +#define SMI_WRITE_REG(a,v) \ +{ \ + int __r; \ + \ + __r = target_write_u32(target, io_base + (a), (v)); \ + if (__r != ERROR_OK) \ + return __r; \ +} + +#define SMI_POLL_TFF(timeout) \ +{ \ + int __r; \ + \ + __r = poll_tff(target, io_base, timeout); \ + if (__r != ERROR_OK) \ + return __r; \ +} + +#define SMI_SET_SW_MODE() SMI_WRITE_REG(SMI_CR1, \ + SMI_READ_REG(SMI_CR1) | SMI_SW_MODE) +#define SMI_SET_HWWB_MODE() SMI_WRITE_REG(SMI_CR1, \ + (SMI_READ_REG(SMI_CR1) | SMI_WB_MODE) & ~SMI_SW_MODE) +#define SMI_SET_HW_MODE() SMI_WRITE_REG(SMI_CR1, \ + SMI_READ_REG(SMI_CR1) & ~(SMI_SW_MODE | SMI_WB_MODE)) +#define SMI_CLEAR_TFF() SMI_WRITE_REG(SMI_SR, ~SMI_TFF) + +#define SMI_BANK_SIZE (0x01000000) + +#define SMI_CR1 (0x00) /* Control register 1 */ +#define SMI_CR2 (0x04) /* Control register 2 */ +#define SMI_SR (0x08) /* Status register */ +#define SMI_TR (0x0c) /* TX */ +#define SMI_RR (0x10) /* RX */ + +/* fields in SMI_CR1 */ +#define SMI_SW_MODE 0x10000000 /* set to enable SW Mode */ +#define SMI_WB_MODE 0x20000000 /* Write Burst Mode */ + +/* fields in SMI_CR2 */ +#define SMI_TX_LEN_1 0x00000001 /* data length = 1 byte */ +#define SMI_TX_LEN_4 0x00000004 /* data length = 4 byte */ +#define SMI_RX_LEN_3 0x00000030 /* data length = 3 byte */ +#define SMI_SEND 0x00000080 /* Send data */ +#define SMI_RSR 0x00000400 /* reads status reg */ +#define SMI_WE 0x00000800 /* Write Enable */ +#define SMI_SEL_BANK0 0x00000000 /* Select Bank0 */ +#define SMI_SEL_BANK1 0x00001000 /* Select Bank1 */ +#define SMI_SEL_BANK2 0x00002000 /* Select Bank2 */ +#define SMI_SEL_BANK3 0x00003000 /* Select Bank3 */ + +/* fields in SMI_SR */ +#define SMI_WIP_BIT 0x00000001 /* WIP Bit of SPI SR on SMI SR */ +#define SMI_WEL_BIT 0x00000002 /* WEL Bit of SPI SR on SMI SR */ +#define SMI_TFF 0x00000100 /* Transfer Finished Flag */ + +/* Commands */ +#define SMI_READ_ID 0x0000009F /* Read Flash Identification */ + +/* Timeout in ms */ +#define SMI_CMD_TIMEOUT (100) +#define SMI_PROBE_TIMEOUT (100) +#define SMI_MAX_TIMEOUT (3000) + +struct stmsmi_flash_bank +{ + int probed; + uint32_t io_base; + uint32_t bank_num; + struct flash_device *dev; +}; + +/* data structure to maintain flash ids from different vendors */ +struct flash_device { + char *name; + uint8_t erase_cmd; + uint32_t device_id; + uint32_t pagesize; + unsigned long sectorsize; + unsigned long size_in_bytes; +}; + +#define FLASH_ID(n, es, id, psize, ssize, size) \ +{ \ + .name = n, \ + .erase_cmd = es, \ + .device_id = id, \ + .pagesize = psize, \ + .sectorsize = ssize, \ + .size_in_bytes = size \ +} + +/* List below is taken from Linux driver. It is not exhaustive of all the + * possible SPI memories, nor exclusive for SMI. Could be shared with + * other SPI drivers. */ +static struct flash_device flash_devices[] = { + /* name, erase_cmd, device_id, pagesize, sectorsize, size_in_bytes */ + FLASH_ID("st m25p05", 0xd8, 0x00102020, 0x80, 0x8000, 0x10000), + FLASH_ID("st m25p10", 0xd8, 0x00112020, 0x80, 0x8000, 0x20000), + FLASH_ID("st m25p20", 0xd8, 0x00122020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m25p40", 0xd8, 0x00132020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m25p80", 0xd8, 0x00142020, 0x100, 0x10000, 0x100000), + FLASH_ID("st m25p16", 0xd8, 0x00152020, 0x100, 0x10000, 0x200000), + FLASH_ID("st m25p32", 0xd8, 0x00162020, 0x100, 0x10000, 0x400000), + FLASH_ID("st m25p64", 0xd8, 0x00172020, 0x100, 0x10000, 0x800000), + FLASH_ID("st m25p128", 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000), + FLASH_ID("st m45pe10", 0xd8, 0x00114020, 0x100, 0x10000, 0x20000), + FLASH_ID("st m45pe20", 0xd8, 0x00124020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m45pe40", 0xd8, 0x00134020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m45pe80", 0xd8, 0x00144020, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl004", 0xd8, 0x00120201, 0x100, 0x10000, 0x80000), + FLASH_ID("sp s25fl008", 0xd8, 0x00130201, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl016", 0xd8, 0x00140201, 0x100, 0x10000, 0x200000), + FLASH_ID("sp s25fl032", 0xd8, 0x00150201, 0x100, 0x10000, 0x400000), + FLASH_ID("sp s25fl064", 0xd8, 0x00160201, 0x100, 0x10000, 0x800000), + FLASH_ID("atmel 25f512", 0x52, 0x0065001f, 0x80, 0x8000, 0x10000), + FLASH_ID("atmel 25f1024", 0x52, 0x0060001f, 0x100, 0x8000, 0x20000), + FLASH_ID("atmel 25f2048", 0x52, 0x0063001f, 0x100, 0x10000, 0x40000), + FLASH_ID("atmel 25f4096", 0x52, 0x0064001f, 0x100, 0x10000, 0x80000), + FLASH_ID("atmel 25fs040", 0xd7, 0x0004661f, 0x100, 0x10000, 0x80000), + FLASH_ID("mac 25l512", 0xd8, 0x001020c2, 0x010, 0x10000, 0x10000), + FLASH_ID("mac 25l1005", 0xd8, 0x001120c2, 0x010, 0x10000, 0x20000), + FLASH_ID("mac 25l2005", 0xd8, 0x001220c2, 0x010, 0x10000, 0x40000), + FLASH_ID("mac 25l4005", 0xd8, 0x001320c2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l8005", 0xd8, 0x001420c2, 0x010, 0x10000, 0x100000), + FLASH_ID("mac 25l1605", 0xd8, 0x001520c2, 0x100, 0x10000, 0x200000), + FLASH_ID("mac 25l3205", 0xd8, 0x001620c2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l6405", 0xd8, 0x001720c2, 0x100, 0x10000, 0x800000), + FLASH_ID(NULL, 0, 0, 0, 0, 0) +}; + +struct stmsmi_target { + char *name; + uint32_t tap_idcode; + uint32_t smi_base; + uint32_t io_base; +}; + +static struct stmsmi_target target_devices[] = { + /* name, tap_idcode, smi_base, io_base */ + { "SPEAr3xx/6xx", 0x07926041, 0xf8000000, 0xfc000000 }, + { "STR75x", 0x4f1f0041, 0x80000000, 0x90000000 }, + { NULL, 0, 0, 0 } +}; + +FLASH_BANK_COMMAND_HANDLER(stmsmi_flash_bank_command) +{ + struct stmsmi_flash_bank *stmsmi_info; + + LOG_DEBUG(__FUNCTION__); + + if (CMD_ARGC < 6) + { + LOG_WARNING("incomplete flash_bank stmsmi configuration"); + return ERROR_FLASH_BANK_INVALID; + } + + stmsmi_info = malloc(sizeof(struct stmsmi_flash_bank)); + if (stmsmi_info == NULL) + { + LOG_ERROR("not enough memory"); + return ERROR_FAIL; + } + + bank->driver_priv = stmsmi_info; + stmsmi_info->probed = 0; + + return ERROR_OK; +} + +/* Poll transmit finished flag */ +/* timeout in ms */ +static int poll_tff(struct target *target, uint32_t io_base, int timeout) +{ + long long endtime; + + if (SMI_READ_REG(SMI_SR) & SMI_TFF) + return ERROR_OK; + + endtime = timeval_ms() + timeout; + do { + alive_sleep(1); + if (SMI_READ_REG(SMI_SR) & SMI_TFF) + return ERROR_OK; + } while (timeval_ms() < endtime); + + LOG_ERROR("Timeout while polling TFF"); + return ERROR_FLASH_OPERATION_FAILED; +} + +/* Read the status register of the external SPI flash chip. + * The operation is triggered by setting SMI_RSR bit. + * SMI sends the proper SPI command (0x05) and returns value in SMI_SR */ +static int read_status_reg(struct flash_bank *bank, uint32_t *status) +{ + struct target *target = bank->target; + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + uint32_t io_base = stmsmi_info->io_base; + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* Read status */ + SMI_WRITE_REG(SMI_CR2, stmsmi_info->bank_num | SMI_RSR); + + /* Poll transmit finished flag */ + SMI_POLL_TFF(SMI_CMD_TIMEOUT); + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + *status = SMI_READ_REG(SMI_SR) & 0x0000ffff; + + /* clean-up SMI_CR2 */ + SMI_WRITE_REG(SMI_CR2, 0); /* AB: Required ? */ + + return ERROR_OK; +} + +/* check for WIP (write in progress) bit in status register */ +/* timeout in ms */ +static int wait_till_ready(struct flash_bank *bank, int timeout) +{ + uint32_t status; + int retval; + long long endtime; + + endtime = timeval_ms() + timeout; + do { + /* read flash status register */ + retval = read_status_reg(bank, &status); + if (retval != ERROR_OK) + return retval; + + if ((status & SMI_WIP_BIT) == 0) + return ERROR_OK; + alive_sleep(1); + } while (timeval_ms() < endtime); + + LOG_ERROR("timeout"); + return ERROR_FAIL; +} + +/* Send "write enable" command to SPI flash chip. + * The operation is triggered by setting SMI_WE bit, and SMI sends + * the proper SPI command (0x06) */ +static int smi_write_enable(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + uint32_t io_base = stmsmi_info->io_base; + uint32_t status; + int retval; + + /* Enter in HW mode */ + SMI_SET_HW_MODE(); /* AB: is this correct ?*/ + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* Send write enable command */ + SMI_WRITE_REG(SMI_CR2, stmsmi_info->bank_num | SMI_WE); + + /* Poll transmit finished flag */ + SMI_POLL_TFF(SMI_CMD_TIMEOUT); + + /* read flash status register */ + retval = read_status_reg(bank, &status); + if (retval != ERROR_OK) + return retval; + + /* Check write enabled */ + if ((status & SMI_WEL_BIT) == 0) + { + LOG_ERROR("Cannot enable write to flash. Status=0x%08" PRIx32, status); + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static uint32_t erase_command(struct stmsmi_flash_bank *stmsmi_info, + uint32_t offset) +{ + union { + uint32_t command; + uint8_t x[4]; + } cmd; + + cmd.x[0] = stmsmi_info->dev->erase_cmd; + cmd.x[1] = offset >> 16; + cmd.x[2] = offset >> 8; + cmd.x[3] = offset; + + return cmd.command; +} + +static int smi_erase_sector(struct flash_bank *bank, int sector) +{ + struct target *target = bank->target; + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + uint32_t io_base = stmsmi_info->io_base; + uint32_t cmd; + int retval; + + retval = smi_write_enable(bank); + if (retval != ERROR_OK) + return retval; + + /* Switch to SW mode to send sector erase command */ + SMI_SET_SW_MODE(); + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* send SPI command "block erase" */ + cmd = erase_command(stmsmi_info, bank->sectors[sector].offset); + SMI_WRITE_REG(SMI_TR, cmd); + SMI_WRITE_REG(SMI_CR2, stmsmi_info->bank_num | SMI_SEND | SMI_TX_LEN_4); + + /* Poll transmit finished flag */ + SMI_POLL_TFF(SMI_CMD_TIMEOUT); + + /* poll WIP for end of self timed Sector Erase cycle */ + retval = wait_till_ready(bank, SMI_MAX_TIMEOUT); + if (retval != ERROR_OK) + return retval; + + return ERROR_OK; +} + +static int stmsmi_erase(struct flash_bank *bank, int first, int last) +{ + struct target *target = bank->target; + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + uint32_t io_base = stmsmi_info->io_base; + int retval = ERROR_OK; + int sector; + + LOG_DEBUG("%s: from sector %d to sector %d", __FUNCTION__, first, last); + + if (target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) + { + LOG_ERROR("Flash sector invalid"); + return ERROR_FLASH_SECTOR_INVALID; + } + + if (!(stmsmi_info->probed)) + { + LOG_ERROR("Flash bank not probed"); + return ERROR_FLASH_BANK_NOT_PROBED; + } + + for (sector = first; sector <= last; sector++) + { + if (bank->sectors[sector].is_protected) + { + LOG_ERROR("Flash sector %d protected", sector); + return ERROR_FAIL; + } + } + + for (sector = first; sector <= last; sector++) + { + retval = smi_erase_sector(bank, sector); + if (retval != ERROR_OK) + break; + keep_alive(); + } + + /* Switch to HW mode before return to prompt */ + SMI_SET_HW_MODE(); + return retval; +} + +static int stmsmi_protect(struct flash_bank *bank, int set, + int first, int last) +{ + int sector; + + for (sector = first; sector <= last; sector++) + bank->sectors[sector].is_protected = set; + return ERROR_OK; +} + +static int smi_write_buffer(struct flash_bank *bank, uint8_t *buffer, + uint32_t address, uint32_t len) +{ + struct target *target = bank->target; + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + uint32_t io_base = stmsmi_info->io_base; + int retval; + + LOG_DEBUG("%s: address=0x%08" PRIx32 " len=0x%08" PRIx32, + __FUNCTION__, address, len); + + retval = smi_write_enable(bank); + if (retval != ERROR_OK) + return retval; + + /* HW mode, write burst mode */ + SMI_SET_HWWB_MODE(); + + retval = target_write_buffer(target, address, len, buffer); + if (retval != ERROR_OK) + return retval; + + return ERROR_OK; +} + +static int stmsmi_write(struct flash_bank *bank, uint8_t *buffer, + uint32_t offset, uint32_t count) +{ + struct target *target = bank->target; + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + uint32_t io_base = stmsmi_info->io_base; + uint32_t cur_count, page_size, page_offset; + int sector; + int retval = ERROR_OK; + + LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32, + __FUNCTION__, offset, count); + + if (target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if (offset + count > stmsmi_info->dev->size_in_bytes) + { + LOG_WARNING("Write pasts end of flash. Extra data discarded."); + count = stmsmi_info->dev->size_in_bytes - offset; + } + + /* Check sector protection */ + for (sector = 0; sector < bank->num_sectors; sector++) + { + /* Start offset in or before this sector? */ + /* End offset in or behind this sector? */ + if ( (offset < + (bank->sectors[sector].offset + bank->sectors[sector].size)) + && ((offset + count - 1) >= bank->sectors[sector].offset) + && bank->sectors[sector].is_protected ) + { + LOG_ERROR("Flash sector %d protected", sector); + return ERROR_FAIL; + } + } + + page_size = stmsmi_info->dev->pagesize; + + /* unaligned buffer head */ + if (count > 0 && (offset & 3) != 0) + { + cur_count = 4 - (offset & 3); + if (cur_count > count) + cur_count = count; + retval = smi_write_buffer(bank, buffer, bank->base + offset, + cur_count); + if (retval != ERROR_OK) + goto err; + offset += cur_count; + buffer += cur_count; + count -= cur_count; + } + + page_offset = offset % page_size; + /* central part, aligned words */ + while (count >= 4) + { + /* clip block at page boundary */ + if (page_offset + count > page_size) + cur_count = page_size - page_offset; + else + cur_count = count & ~3; + + retval = smi_write_buffer(bank, buffer, bank->base + offset, + cur_count); + if (retval != ERROR_OK) + goto err; + + page_offset = 0; + buffer += cur_count; + offset += cur_count; + count -= cur_count; + + keep_alive(); + } + + /* buffer tail */ + if (count > 0) + retval = smi_write_buffer(bank, buffer, bank->base + offset, count); + +err: + /* Switch to HW mode before return to prompt */ + SMI_SET_HW_MODE(); + return retval; +} + +/* Return ID of flash device */ +/* On exit, SW mode is kept */ +static int read_flash_id(struct flash_bank *bank, uint32_t *id) +{ + struct target *target = bank->target; + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + uint32_t io_base = stmsmi_info->io_base; + int retval; + + if (target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + /* poll WIP */ + retval = wait_till_ready(bank, SMI_PROBE_TIMEOUT); + if (retval != ERROR_OK) + return retval; + + /* enter in SW mode */ + SMI_SET_SW_MODE(); + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* Send SPI command "read ID" */ + SMI_WRITE_REG(SMI_TR, SMI_READ_ID); + SMI_WRITE_REG(SMI_CR2, + stmsmi_info->bank_num | SMI_SEND | SMI_RX_LEN_3 | SMI_TX_LEN_1); + + /* Poll transmit finished flag */ + SMI_POLL_TFF(SMI_CMD_TIMEOUT); + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* read ID from Receive Register */ + *id = SMI_READ_REG(SMI_RR) & 0x00ffffff; + return ERROR_OK; +} + +static int stmsmi_probe(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + uint32_t io_base; + struct flash_sector *sectors; + uint32_t id = 0; /* silence uninitialized warning */ + struct stmsmi_target *target_device; + int retval; + + if (stmsmi_info->probed) + free(bank->sectors); + stmsmi_info->probed = 0; + + for (target_device=target_devices ; target_device->name ; ++target_device) + if (target_device->tap_idcode == target->tap->idcode) + break; + if (!target_device->name) + { + LOG_ERROR("Device ID 0x%" PRIx32 " is not known as SMI capable", + target->tap->idcode); + return ERROR_FAIL; + } + + switch (bank->base - target_device->smi_base) + { + case 0: + stmsmi_info->bank_num = SMI_SEL_BANK0; + break; + case SMI_BANK_SIZE: + stmsmi_info->bank_num = SMI_SEL_BANK1; + break; + case 2*SMI_BANK_SIZE: + stmsmi_info->bank_num = SMI_SEL_BANK2; + break; + case 3*SMI_BANK_SIZE: + stmsmi_info->bank_num = SMI_SEL_BANK3; + break; + default: + LOG_ERROR("Invalid SMI base address 0x%" PRIx32, bank->base); + return ERROR_FAIL; + } + io_base = target_device->io_base; + stmsmi_info->io_base = io_base; + + LOG_DEBUG("Valid SMI on device %s at address 0x%" PRIx32, + target_device->name, bank->base); + + /* read and decode flash ID; returns in SW mode */ + retval = read_flash_id(bank, &id); + SMI_SET_HW_MODE(); + if (retval != ERROR_OK) + return retval; + + stmsmi_info->dev = NULL; + for (struct flash_device *p = flash_devices; p->name ; p++) + if (p->device_id == id) { + stmsmi_info->dev = p; + break; + } + + if (!stmsmi_info->dev) + { + LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id); + return ERROR_FAIL; + } + + LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")", + stmsmi_info->dev->name, stmsmi_info->dev->device_id); + + /* Set correct size value */ + bank->size = stmsmi_info->dev->size_in_bytes; + + /* create and fill sectors array */ + bank->num_sectors = + stmsmi_info->dev->size_in_bytes / stmsmi_info->dev->sectorsize; + sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); + if (sectors == NULL) + { + LOG_ERROR("not enough memory"); + return ERROR_FAIL; + } + + for (int sector = 0; sector < bank->num_sectors; sector++) + { + sectors[sector].offset = sector * stmsmi_info->dev->sectorsize; + sectors[sector].size = stmsmi_info->dev->sectorsize; + sectors[sector].is_erased = -1; + sectors[sector].is_protected = 1; + } + + bank->sectors = sectors; + stmsmi_info->probed = 1; + return ERROR_OK; +} + +static int stmsmi_auto_probe(struct flash_bank *bank) +{ + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + if (stmsmi_info->probed) + return ERROR_OK; + return stmsmi_probe(bank); +} + +static int stmsmi_protect_check(struct flash_bank *bank) +{ + /* Nothing to do. Protection is only handled in SW. */ + return ERROR_OK; +} + +static int get_stmsmi_info(struct flash_bank *bank, char *buf, int buf_size) +{ + struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; + int printed; + + if (!(stmsmi_info->probed)) + { + printed = snprintf(buf, buf_size, + "\nSMI flash bank not probed yet\n"); + return ERROR_OK; + } + + printed = snprintf(buf, buf_size, "\nSMI flash information:\n" + " Device \'%s\' (ID 0x%08x)\n", + stmsmi_info->dev->name, stmsmi_info->dev->device_id); + buf += printed; + buf_size -= printed; + + return ERROR_OK; +} + +struct flash_driver stmsmi_flash = { + .name = "stmsmi", + .flash_bank_command = stmsmi_flash_bank_command, + .erase = stmsmi_erase, + .protect = stmsmi_protect, + .write = stmsmi_write, + .read = default_flash_read, + .probe = stmsmi_probe, + .auto_probe = stmsmi_auto_probe, + .erase_check = default_flash_blank_check, + .protect_check = stmsmi_protect_check, + .info = get_stmsmi_info, +}; -- cgit v1.2.3