From e5408ce0b6b4805421fd81fe772b070367854c03 Mon Sep 17 00:00:00 2001 From: oharboe Date: Fri, 26 Sep 2008 17:55:28 +0000 Subject: Gheorghe Guran redone at91sam7 driver. Old driver source file renamed. The old driver is still invoked by default and the new driver is invoked by using at91sam7_new git-svn-id: svn://svn.berlios.de/openocd/trunk@1007 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/flash/at91sam7_old.c | 954 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 954 insertions(+) create mode 100644 src/flash/at91sam7_old.c (limited to 'src/flash/at91sam7_old.c') diff --git a/src/flash/at91sam7_old.c b/src/flash/at91sam7_old.c new file mode 100644 index 00000000..db14da6e --- /dev/null +++ b/src/flash/at91sam7_old.c @@ -0,0 +1,954 @@ +/*************************************************************************** + * Copyright (C) 2006 by Magnus Lundin * + * lundin@mlu.mine.nu * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +/*************************************************************************** +There are some things to notice + +* AT91SAM7S64 is tested +* All AT91SAM7Sxx and AT91SAM7Xxx should work but is not tested +* All parameters are identified from onchip configuartion registers +* +* The flash controller handles erases automatically on a page (128/265 byte) basis +* Only an EraseAll command is supported by the controller +* Partial erases can be implemented in software by writing one 0xFFFFFFFF word to +* some location in every page in the region to be erased +* +* Lock regions (sectors) are 32 or 64 pages +* + ***************************************************************************/ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "replacements.h" + +#include "at91sam7_old.h" + +#include "flash.h" +#include "target.h" +#include "log.h" +#include "binarybuffer.h" +#include "types.h" + +#include +#include +#include + +int at91sam7_old_register_commands(struct command_context_s *cmd_ctx); +int at91sam7_old_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank); +int at91sam7_old_erase(struct flash_bank_s *bank, int first, int last); +int at91sam7_old_protect(struct flash_bank_s *bank, int set, int first, int last); +int at91sam7_old_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count); +int at91sam7_old_probe(struct flash_bank_s *bank); +int at91sam7_old_auto_probe(struct flash_bank_s *bank); +int at91sam7_old_erase_check(struct flash_bank_s *bank); +int at91sam7_old_protect_check(struct flash_bank_s *bank); +int at91sam7_old_info(struct flash_bank_s *bank, char *buf, int buf_size); + +u32 at91sam7_old_get_flash_status(flash_bank_t *bank, u8 flashplane); +void at91sam7_old_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode); +u32 at91sam7_old_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout); +int at91sam7_old_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen); +int at91sam7_old_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); + +flash_driver_t at91sam7_old_flash = +{ + .name = "at91sam7", + .register_commands = at91sam7_old_register_commands, + .flash_bank_command = at91sam7_old_flash_bank_command, + .erase = at91sam7_old_erase, + .protect = at91sam7_old_protect, + .write = at91sam7_old_write, + .probe = at91sam7_old_probe, + .auto_probe = at91sam7_old_probe, + .erase_check = at91sam7_old_erase_check, + .protect_check = at91sam7_old_protect_check, + .info = at91sam7_old_info +}; + +u32 MC_FMR_old[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 }; +u32 MC_FCR_old[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 }; +u32 MC_FSR_old[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 }; + +char * EPROC_old[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"}; +long NVPSIZ_old[16] = { + 0, + 0x2000, /* 8K */ + 0x4000, /* 16K */ + 0x8000, /* 32K */ + -1, + 0x10000, /* 64K */ + -1, + 0x20000, /* 128K */ + -1, + 0x40000, /* 256K */ + 0x80000, /* 512K */ + -1, + 0x100000, /* 1024K */ + -1, + 0x200000, /* 2048K */ + -1 +}; + +long SRAMSIZ_old[16] = { + -1, + 0x0400, /* 1K */ + 0x0800, /* 2K */ + -1, + 0x1c000, /* 112K */ + 0x1000, /* 4K */ + 0x14000, /* 80K */ + 0x28000, /* 160K */ + 0x2000, /* 8K */ + 0x4000, /* 16K */ + 0x8000, /* 32K */ + 0x10000, /* 64K */ + 0x20000, /* 128K */ + 0x40000, /* 256K */ + 0x18000, /* 96K */ + 0x80000, /* 512K */ +}; + +int at91sam7_old_register_commands(struct command_context_s *cmd_ctx) +{ + command_t *at91sam7_old_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL); + register_command(cmd_ctx, at91sam7_old_cmd, "gpnvm", at91sam7_old_handle_gpnvm_command, COMMAND_EXEC, + "at91sam7 gpnvm set|clear, set or clear at91sam7 gpnvm bit"); + + return ERROR_OK; +} + +u32 at91sam7_old_get_flash_status(flash_bank_t *bank, u8 flashplane) +{ + target_t *target = bank->target; + u32 fsr; + + target_read_u32(target, MC_FSR_old[flashplane], &fsr); + + return fsr; +} + +/* Read clock configuration and set at91sam7_old_info->usec_clocks*/ +void at91sam7_old_read_clock_info(flash_bank_t *bank) +{ + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + target_t *target = bank->target; + u32 mckr, mcfr, pllr; + unsigned long tmp = 0, mainfreq; + int flashplane; + + /* Read main clock freqency register */ + target_read_u32(target, CKGR_MCFR_old, &mcfr); + /* Read master clock register */ + target_read_u32(target, PMC_MCKR_old, &mckr); + /* Read Clock Generator PLL Register */ + target_read_u32(target, CKGR_PLLR_old, &pllr); + + at91sam7_old_info->mck_valid = 0; + switch (mckr & PMC_MCKR_CSS_old) + { + case 0: /* Slow Clock */ + at91sam7_old_info->mck_valid = 1; + mainfreq = RC_FREQ_old / 16ul * (mcfr & 0xffff); + tmp = mainfreq; + break; + case 1: /* Main Clock */ + if (mcfr & CKGR_MCFR_MAINRDY_old) + { + at91sam7_old_info->mck_valid = 1; + mainfreq = RC_FREQ_old / 16ul * (mcfr & 0xffff); + tmp = mainfreq; + } + break; + + case 2: /* Reserved */ + break; + case 3: /* PLL Clock */ + if (mcfr & CKGR_MCFR_MAINRDY_old) + { + target_read_u32(target, CKGR_PLLR_old, &pllr); + if (!(pllr & CKGR_PLLR_DIV_old)) + break; /* 0 Hz */ + at91sam7_old_info->mck_valid = 1; + mainfreq = RC_FREQ_old / 16ul * (mcfr & 0xffff); + /* Integer arithmetic should have sufficient precision + as long as PLL is properly configured. */ + tmp = mainfreq / (pllr & CKGR_PLLR_DIV_old) * + (((pllr & CKGR_PLLR_MUL_old) >> 16) + 1); + } + break; + } + + /* Prescaler adjust */ + if (((mckr & PMC_MCKR_PRES_old) >> 2) == 7) + at91sam7_old_info->mck_valid = 0; + else + at91sam7_old_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES_old) >> 2); + + /* Forget old flash timing */ + for (flashplane = 0; flashplanenum_planes; flashplane++) + { + at91sam7_old_set_flash_mode(bank, flashplane, FMR_TIMING_NONE_old); + } +} + +/* Setup the timimg registers for nvbits or normal flash */ +void at91sam7_old_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode) +{ + u32 fmr, fmcn = 0, fws = 0; + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + target_t *target = bank->target; + + if (mode && (mode != at91sam7_old_info->flashmode[flashplane])) + { + /* Always round up (ceil) */ + if (mode==FMR_TIMING_NVBITS_old) + { + if (at91sam7_old_info->cidr_arch == 0x60) + { + /* AT91SAM7A3 uses master clocks in 100 ns */ + fmcn = (at91sam7_old_info->mck_freq/10000000ul)+1; + } + else + { + /* master clocks in 1uS for ARCH 0x7 types */ + fmcn = (at91sam7_old_info->mck_freq/1000000ul)+1; + } + } + else if (mode==FMR_TIMING_FLASH_old) + /* main clocks in 1.5uS */ + fmcn = (at91sam7_old_info->mck_freq/666666ul)+1; + + /* Only allow fmcn=0 if clock period is > 30 us = 33kHz. */ + if (at91sam7_old_info->mck_freq <= 33333ul) + fmcn = 0; + /* Only allow fws=0 if clock frequency is < 30 MHz. */ + if (at91sam7_old_info->mck_freq > 30000000ul) + fws = 1; + + LOG_DEBUG("fmcn[%i]: %i", flashplane, fmcn); + fmr = fmcn << 16 | fws << 8; + target_write_u32(target, MC_FMR_old[flashplane], fmr); + } + + at91sam7_old_info->flashmode[flashplane] = mode; +} + +u32 at91sam7_old_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout) +{ + u32 status; + + while ((!((status = at91sam7_old_get_flash_status(bank,flashplane)) & waitbits)) && (timeout-- > 0)) + { + LOG_DEBUG("status[%i]: 0x%x", flashplane, status); + alive_sleep(1); + } + + LOG_DEBUG("status[%i]: 0x%x", flashplane, status); + + if (status & 0x0C) + { + LOG_ERROR("status register: 0x%x", status); + if (status & 0x4) + LOG_ERROR("Lock Error Bit Detected, Operation Abort"); + if (status & 0x8) + LOG_ERROR("Invalid command and/or bad keyword, Operation Abort"); + if (status & 0x10) + LOG_ERROR("Security Bit Set, Operation Abort"); + } + + return status; +} + + +/* Send one command to the AT91SAM flash controller */ +int at91sam7_old_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen) +{ + u32 fcr; + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + target_t *target = bank->target; + + fcr = (0x5A<<24) | ((pagen&0x3FF)<<8) | cmd; + target_write_u32(target, MC_FCR_old[flashplane], fcr); + LOG_DEBUG("Flash command: 0x%x, flashplane: %i, pagenumber:%u", fcr, flashplane, pagen); + + if ((at91sam7_old_info->cidr_arch == 0x60)&&((cmd==SLB_old)|(cmd==CLB_old))) + { + /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */ + if (at91sam7_old_wait_status_busy(bank, flashplane, MC_FSR_EOL_old, 10)&0x0C) + { + return ERROR_FLASH_OPERATION_FAILED; + } + return ERROR_OK; + } + + if (at91sam7_old_wait_status_busy(bank, flashplane, MC_FSR_FRDY_old, 10)&0x0C) + { + return ERROR_FLASH_OPERATION_FAILED; + } + return ERROR_OK; +} + +/* Read device id register, main clock frequency register and fill in driver info structure */ +int at91sam7_old_read_part_info(struct flash_bank_s *bank) +{ + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + target_t *target = bank->target; + u32 cidr, status; + int sectornum; + + if (at91sam7_old_info->cidr != 0) + return ERROR_OK; /* already probed, multiple probes may cause memory leak, not allowed */ + + /* Read and parse chip identification register */ + target_read_u32(target, DBGU_CIDR_old, &cidr); + + if (cidr == 0) + { + LOG_WARNING("Cannot identify target as an AT91SAM"); + return ERROR_FLASH_OPERATION_FAILED; + } + + at91sam7_old_info->cidr = cidr; + at91sam7_old_info->cidr_ext = (cidr>>31)&0x0001; + at91sam7_old_info->cidr_nvptyp = (cidr>>28)&0x0007; + at91sam7_old_info->cidr_arch = (cidr>>20)&0x00FF; + at91sam7_old_info->cidr_sramsiz = (cidr>>16)&0x000F; + at91sam7_old_info->cidr_nvpsiz2 = (cidr>>12)&0x000F; + at91sam7_old_info->cidr_nvpsiz = (cidr>>8)&0x000F; + at91sam7_old_info->cidr_eproc = (cidr>>5)&0x0007; + at91sam7_old_info->cidr_version = cidr&0x001F; + bank->size = NVPSIZ_old[at91sam7_old_info->cidr_nvpsiz]; + at91sam7_old_info->target_name = "Unknown"; + + /* Support just for bulk erase of a single flash plane, whole device if flash size <= 256k */ + if (NVPSIZ_old[at91sam7_old_info->cidr_nvpsiz]<0x80000) /* Flash size less than 512K, one flash plane */ + { + bank->num_sectors = 1; + bank->sectors = malloc(sizeof(flash_sector_t)); + bank->sectors[0].offset = 0; + bank->sectors[0].size = bank->size; + bank->sectors[0].is_erased = -1; + bank->sectors[0].is_protected = -1; + } + else /* Flash size 512K or larger, several flash planes */ + { + bank->num_sectors = NVPSIZ_old[at91sam7_old_info->cidr_nvpsiz]/0x40000; + bank->sectors = malloc(bank->num_sectors*sizeof(flash_sector_t)); + for (sectornum=0; sectornumnum_sectors; sectornum++) + { + bank->sectors[sectornum].offset = sectornum*0x40000; + bank->sectors[sectornum].size = 0x40000; + bank->sectors[sectornum].is_erased = -1; + bank->sectors[sectornum].is_protected = -1; + } + } + + + + LOG_DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_old_info->cidr_nvptyp, at91sam7_old_info->cidr_arch ); + + /* Read main and master clock freqency register */ + at91sam7_old_read_clock_info(bank); + + at91sam7_old_info->num_planes = 1; + status = at91sam7_old_get_flash_status(bank, 0); + at91sam7_old_info->securitybit = (status>>4)&0x01; + at91sam7_old_protect_check(bank); /* TODO Check the protect check */ + + if (at91sam7_old_info->cidr_arch == 0x70 ) + { + at91sam7_old_info->num_nvmbits = 2; + at91sam7_old_info->nvmbits = (status>>8)&0x03; + bank->base = 0x100000; + bank->bus_width = 4; + if (bank->size==0x80000) /* AT91SAM7S512 */ + { + at91sam7_old_info->target_name = "AT91SAM7S512"; + at91sam7_old_info->num_planes = 2; + if (at91sam7_old_info->num_planes != bank->num_sectors) + LOG_WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");; + at91sam7_old_info->num_lockbits = 2*16; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 2*16*64; + } + if (bank->size==0x40000) /* AT91SAM7S256 */ + { + at91sam7_old_info->target_name = "AT91SAM7S256"; + at91sam7_old_info->num_lockbits = 16; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 16*64; + } + if (bank->size==0x20000) /* AT91SAM7S128 */ + { + at91sam7_old_info->target_name = "AT91SAM7S128"; + at91sam7_old_info->num_lockbits = 8; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 8*64; + } + if (bank->size==0x10000) /* AT91SAM7S64 */ + { + at91sam7_old_info->target_name = "AT91SAM7S64"; + at91sam7_old_info->num_lockbits = 16; + at91sam7_old_info->pagesize = 128; + at91sam7_old_info->pages_in_lockregion = 32; + at91sam7_old_info->num_pages = 16*32; + } + if (bank->size==0x08000) /* AT91SAM7S321/32 */ + { + at91sam7_old_info->target_name = "AT91SAM7S321/32"; + at91sam7_old_info->num_lockbits = 8; + at91sam7_old_info->pagesize = 128; + at91sam7_old_info->pages_in_lockregion = 32; + at91sam7_old_info->num_pages = 8*32; + } + + return ERROR_OK; + } + + if (at91sam7_old_info->cidr_arch == 0x71 ) + { + at91sam7_old_info->num_nvmbits = 3; + at91sam7_old_info->nvmbits = (status>>8)&0x07; + bank->base = 0x100000; + bank->bus_width = 4; + if (bank->size==0x80000) /* AT91SAM7XC512 */ + { + at91sam7_old_info->target_name = "AT91SAM7XC512"; + at91sam7_old_info->num_planes = 2; + if (at91sam7_old_info->num_planes != bank->num_sectors) + LOG_WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");; + at91sam7_old_info->num_lockbits = 2*16; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 2*16*64; + } + if (bank->size==0x40000) /* AT91SAM7XC256 */ + { + at91sam7_old_info->target_name = "AT91SAM7XC256"; + at91sam7_old_info->num_lockbits = 16; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 16*64; + } + if (bank->size==0x20000) /* AT91SAM7XC128 */ + { + at91sam7_old_info->target_name = "AT91SAM7XC128"; + at91sam7_old_info->num_lockbits = 8; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 8*64; + } + + return ERROR_OK; + } + + if (at91sam7_old_info->cidr_arch == 0x72 ) + { + at91sam7_old_info->num_nvmbits = 3; + at91sam7_old_info->nvmbits = (status>>8)&0x07; + bank->base = 0x100000; + bank->bus_width = 4; + if (bank->size==0x80000) /* AT91SAM7SE512 */ + { + at91sam7_old_info->target_name = "AT91SAM7SE512"; + at91sam7_old_info->num_planes = 2; + if (at91sam7_old_info->num_planes != bank->num_sectors) + LOG_WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");; + at91sam7_old_info->num_lockbits = 32; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 32*64; + } + if (bank->size==0x40000) + { + at91sam7_old_info->target_name = "AT91SAM7SE256"; + at91sam7_old_info->num_lockbits = 16; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 16*64; + } + if (bank->size==0x08000) + { + at91sam7_old_info->target_name = "AT91SAM7SE32"; + at91sam7_old_info->num_lockbits = 8; + at91sam7_old_info->pagesize = 128; + at91sam7_old_info->pages_in_lockregion = 32; + at91sam7_old_info->num_pages = 8*32; + } + + return ERROR_OK; + } + + if (at91sam7_old_info->cidr_arch == 0x75 ) + { + at91sam7_old_info->num_nvmbits = 3; + at91sam7_old_info->nvmbits = (status>>8)&0x07; + bank->base = 0x100000; + bank->bus_width = 4; + if (bank->size==0x80000) /* AT91SAM7X512 */ + { + at91sam7_old_info->target_name = "AT91SAM7X512"; + at91sam7_old_info->num_planes = 2; + if (at91sam7_old_info->num_planes != bank->num_sectors) + LOG_WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");; + at91sam7_old_info->num_lockbits = 32; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 2*16*64; + LOG_DEBUG("Support for AT91SAM7X512 is experimental in this version!"); + } + if (bank->size==0x40000) /* AT91SAM7X256 */ + { + at91sam7_old_info->target_name = "AT91SAM7X256"; + at91sam7_old_info->num_lockbits = 16; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 16*64; + } + if (bank->size==0x20000) /* AT91SAM7X128 */ + { + at91sam7_old_info->target_name = "AT91SAM7X128"; + at91sam7_old_info->num_lockbits = 8; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 64; + at91sam7_old_info->num_pages = 8*64; + } + + return ERROR_OK; + } + + if (at91sam7_old_info->cidr_arch == 0x60 ) + { + at91sam7_old_info->num_nvmbits = 3; + at91sam7_old_info->nvmbits = (status>>8)&0x07; + bank->base = 0x100000; + bank->bus_width = 4; + + if (bank->size == 0x40000) /* AT91SAM7A3 */ + { + at91sam7_old_info->target_name = "AT91SAM7A3"; + at91sam7_old_info->num_lockbits = 16; + at91sam7_old_info->pagesize = 256; + at91sam7_old_info->pages_in_lockregion = 16; + at91sam7_old_info->num_pages = 16*64; + } + return ERROR_OK; + } + + LOG_WARNING("at91sam7_old flash only tested for AT91SAM7Sxx series"); + return ERROR_OK; +} + +int at91sam7_old_erase_check(struct flash_bank_s *bank) +{ + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + + if (!at91sam7_old_info->working_area_size) + { + } + else + { + } + + return ERROR_OK; +} + +int at91sam7_old_protect_check(struct flash_bank_s *bank) +{ + u32 status; + int flashplane; + + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + + if (at91sam7_old_info->cidr == 0) + { + return ERROR_FLASH_BANK_NOT_PROBED; + } + + if (bank->target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + for (flashplane=0;flashplanenum_planes;flashplane++) + { + status = at91sam7_old_get_flash_status(bank, flashplane); + at91sam7_old_info->lockbits[flashplane] = (status >> 16); + } + + return ERROR_OK; +} + +/* flash_bank at91sam7_old 0 0 0 0 + */ +int at91sam7_old_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank) +{ + at91sam7_old_flash_bank_t *at91sam7_old_info; + int i; + + if (argc < 6) + { + LOG_WARNING("incomplete flash_bank at91sam7_old configuration"); + return ERROR_FLASH_BANK_INVALID; + } + + at91sam7_old_info = malloc(sizeof(at91sam7_old_flash_bank_t)); + bank->driver_priv = at91sam7_old_info; + + /* part wasn't probed for info yet */ + at91sam7_old_info->cidr = 0; + for (i=0;i<4;i++) + at91sam7_old_info->flashmode[i]=0; + + return ERROR_OK; +} + +int at91sam7_old_erase(struct flash_bank_s *bank, int first, int last) +{ + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + u8 flashplane; + + if (at91sam7_old_info->cidr == 0) + { + return ERROR_FLASH_BANK_NOT_PROBED; + } + + if (bank->target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) + { + if ((first == 0) && (last == (at91sam7_old_info->num_lockbits-1))) + { + LOG_WARNING("Sector numbers based on lockbit count, probably a deprecated script"); + last = bank->num_sectors-1; + } + else return ERROR_FLASH_SECTOR_INVALID; + } + + /* Configure the flash controller timing */ + at91sam7_old_read_clock_info(bank); + for (flashplane = first; flashplane<=last; flashplane++) + { + /* Configure the flash controller timing */ + at91sam7_old_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH_old); + if (at91sam7_old_flash_command(bank, flashplane, EA_old, 0) != ERROR_OK) + { + return ERROR_FLASH_OPERATION_FAILED; + } + } + return ERROR_OK; + +} + +int at91sam7_old_protect(struct flash_bank_s *bank, int set, int first, int last) +{ + u32 cmd, pagen; + u8 flashplane; + int lockregion; + + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + + if (at91sam7_old_info->cidr == 0) + { + return ERROR_FLASH_BANK_NOT_PROBED; + } + + if (bank->target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if ((first < 0) || (last < first) || (last >= at91sam7_old_info->num_lockbits)) + { + return ERROR_FLASH_SECTOR_INVALID; + } + + at91sam7_old_read_clock_info(bank); + + for (lockregion=first;lockregion<=last;lockregion++) + { + pagen = lockregion*at91sam7_old_info->pages_in_lockregion; + flashplane = (pagen>>10)&0x03; + /* Configure the flash controller timing */ + at91sam7_old_set_flash_mode(bank, flashplane, FMR_TIMING_NVBITS_old); + + if (set) + cmd = SLB_old; + else + cmd = CLB_old; + + if (at91sam7_old_flash_command(bank, flashplane, cmd, pagen) != ERROR_OK) + { + return ERROR_FLASH_OPERATION_FAILED; + } + } + + at91sam7_old_protect_check(bank); + + return ERROR_OK; +} + + +int at91sam7_old_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count) +{ + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + target_t *target = bank->target; + u32 dst_min_alignment, wcount, bytes_remaining = count; + u32 first_page, last_page, pagen, buffer_pos; + u8 flashplane; + + if (at91sam7_old_info->cidr == 0) + { + return ERROR_FLASH_BANK_NOT_PROBED; + } + + if (bank->target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if (offset + count > bank->size) + return ERROR_FLASH_DST_OUT_OF_BANK; + + dst_min_alignment = at91sam7_old_info->pagesize; + + if (offset % dst_min_alignment) + { + LOG_WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment); + return ERROR_FLASH_DST_BREAKS_ALIGNMENT; + } + + if (at91sam7_old_info->cidr_arch == 0) + return ERROR_FLASH_BANK_NOT_PROBED; + + first_page = offset/dst_min_alignment; + last_page = CEIL(offset + count, dst_min_alignment); + + LOG_DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count); + + at91sam7_old_read_clock_info(bank); + + for (pagen=first_page; pagentype->write_memory(target, bank->base+pagen*dst_min_alignment, 4, wcount, buffer+buffer_pos); + flashplane = (pagen>>10)&0x3; + + /* Configure the flash controller timing */ + at91sam7_old_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH_old); + /* Send Write Page command to Flash Controller */ + if (at91sam7_old_flash_command(bank, flashplane, WP_old, pagen) != ERROR_OK) + { + return ERROR_FLASH_OPERATION_FAILED; + } + LOG_DEBUG("Write flash plane:%i page number:%i", flashplane, pagen); + } + + return ERROR_OK; +} + + +int at91sam7_old_probe(struct flash_bank_s *bank) +{ + /* we can't probe on an at91sam7_old + * if this is an at91sam7_old, it has the configured flash + */ + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + int retval; + + if (at91sam7_old_info->cidr != 0) + { + return ERROR_OK; /* already probed */ + } + + if (bank->target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + retval = at91sam7_old_read_part_info(bank); + if (retval != ERROR_OK) + return retval; + + return ERROR_OK; +} + + +int at91sam7_old_info(struct flash_bank_s *bank, char *buf, int buf_size) +{ + int printed, flashplane; + at91sam7_old_flash_bank_t *at91sam7_old_info = bank->driver_priv; + + if (at91sam7_old_info->cidr == 0) + { + return ERROR_FLASH_BANK_NOT_PROBED; + } + + printed = snprintf(buf, buf_size, "\nat91sam7_old information: Chip is %s\n",at91sam7_old_info->target_name); + buf += printed; + buf_size -= printed; + + printed = snprintf(buf, buf_size, "cidr: 0x%8.8x, arch: 0x%4.4x, eproc: %s, version:0x%3.3x, flashsize: 0x%8.8x\n", + at91sam7_old_info->cidr, at91sam7_old_info->cidr_arch, EPROC_old[at91sam7_old_info->cidr_eproc], at91sam7_old_info->cidr_version, bank->size); + buf += printed; + buf_size -= printed; + + printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz \n", at91sam7_old_info->mck_freq / 1000); + buf += printed; + buf_size -= printed; + + if (at91sam7_old_info->num_planes>1) { + printed = snprintf(buf, buf_size, "flashplanes: %i, pagesize: %i, lock regions: %i, pages in lock region: %i \n", + at91sam7_old_info->num_planes, at91sam7_old_info->pagesize, at91sam7_old_info->num_lockbits, at91sam7_old_info->num_pages/at91sam7_old_info->num_lockbits); + buf += printed; + buf_size -= printed; + for (flashplane=0; flashplanenum_planes; flashplane++) + { + printed = snprintf(buf, buf_size, "lockbits[%i]: 0x%4.4x, ", flashplane, at91sam7_old_info->lockbits[flashplane]); + buf += printed; + buf_size -= printed; + } + } + else + if (at91sam7_old_info->num_lockbits>0) { + printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n", + at91sam7_old_info->pagesize, at91sam7_old_info->num_lockbits, at91sam7_old_info->lockbits[0], at91sam7_old_info->num_pages/at91sam7_old_info->num_lockbits); + buf += printed; + buf_size -= printed; + } + + printed = snprintf(buf, buf_size, "securitybit: %i, nvmbits(%i): 0x%1.1x\n", at91sam7_old_info->securitybit, at91sam7_old_info->num_nvmbits, at91sam7_old_info->nvmbits); + buf += printed; + buf_size -= printed; + + return ERROR_OK; +} + +/* +* On AT91SAM7S: When the gpnvm bits are set with +* > at91sam7_old gpnvm 0 bitnr set +* the changes are not visible in the flash controller status register MC_FSR_old +* until the processor has been reset. +* On the Olimex board this requires a power cycle. +* Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3): +* The maximum number of write/erase cycles for Non Volatile Memory bits is 100. This includes +* Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit. +*/ +int at91sam7_old_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) +{ + flash_bank_t *bank; + int bit; + u8 flashcmd; + u32 status; + char *value; + at91sam7_old_flash_bank_t *at91sam7_old_info; + int retval; + + if (argc < 3) + { + command_print(cmd_ctx, "at91sam7_old gpnvm "); + return ERROR_OK; + } + + bank = get_flash_bank_by_num_noprobe(strtoul(args[0], NULL, 0)); + bit = atoi(args[1]); + value = args[2]; + + if (bank == NULL) + { + return ERROR_FLASH_BANK_INVALID; + } + + if (bank->driver != &at91sam7_old_flash) + { + command_print(cmd_ctx, "not an at91sam7_old flash bank '%s'", args[0]); + return ERROR_FLASH_BANK_INVALID; + } + + if (strcmp(value, "set") == 0) + { + flashcmd = SGPB_old; + } + else if (strcmp(value, "clear") == 0) + { + flashcmd = CGPB_old; + } + else + { + return ERROR_COMMAND_SYNTAX_ERROR; + } + + at91sam7_old_info = bank->driver_priv; + + if (bank->target->state != TARGET_HALTED) + { + LOG_ERROR("target has to be halted to perform flash operation"); + return ERROR_TARGET_NOT_HALTED; + } + + if (at91sam7_old_info->cidr == 0) + { + retval = at91sam7_old_read_part_info(bank); + if (retval != ERROR_OK) { + return retval; + } + } + + if ((bit<0) || (at91sam7_old_info->num_nvmbits <= bit)) + { + command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[1],at91sam7_old_info->target_name); + return ERROR_OK; + } + + /* Configure the flash controller timing */ + at91sam7_old_read_clock_info(bank); + at91sam7_old_set_flash_mode(bank, 0, FMR_TIMING_NVBITS_old); + + if (at91sam7_old_flash_command(bank, 0, flashcmd, (u16)(bit)) != ERROR_OK) + { + return ERROR_FLASH_OPERATION_FAILED; + } + + status = at91sam7_old_get_flash_status(bank, 0); + LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n",flashcmd,bit,status); + at91sam7_old_info->nvmbits = (status>>8)&((1<num_nvmbits)-1); + + return ERROR_OK; +} -- cgit v1.2.3