From e1ec02bb055fa356b058dddc0a15710e0fdc9870 Mon Sep 17 00:00:00 2001 From: Zachary T Welch Date: Tue, 1 Dec 2009 22:37:11 -0800 Subject: move nand drivers to src/flash/nand/ Moves NAND drivers to src/flash/nand/. Adds src/flash/nand/Makefile.am. Builds libocdflashnand.la. --- src/flash/nand/davinci.c | 756 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 756 insertions(+) create mode 100644 src/flash/nand/davinci.c (limited to 'src/flash/nand/davinci.c') diff --git a/src/flash/nand/davinci.c b/src/flash/nand/davinci.c new file mode 100644 index 00000000..72cd378a --- /dev/null +++ b/src/flash/nand/davinci.c @@ -0,0 +1,756 @@ +/*************************************************************************** + * Copyright (C) 2009 by David Brownell * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +/* + * DaVinci family NAND controller support for OpenOCD. + * + * This driver uses hardware ECC (1-bit or 4-bit) unless + * the chip is accessed in "raw" mode. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "arm_nandio.h" + + +enum ecc { + HWECC1, /* all controllers support 1-bit ECC */ + HWECC4, /* newer chips also have 4-bit ECC hardware */ + HWECC4_INFIX, /* avoid this layout, except maybe for boot code */ +}; + +struct davinci_nand { + struct target *target; + + uint8_t chipsel; /* chipselect 0..3 == CS2..CS5 */ + uint8_t eccmode; + + /* Async EMIF controller base */ + uint32_t aemif; + + /* NAND chip addresses */ + uint32_t data; /* without CLE or ALE */ + uint32_t cmd; /* with CLE */ + uint32_t addr; /* with ALE */ + + /* write acceleration */ + struct arm_nand_data io; + + /* page i/o for the relevant flavor of hardware ECC */ + int (*read_page)(struct nand_device *nand, uint32_t page, + uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size); + int (*write_page)(struct nand_device *nand, uint32_t page, + uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size); +}; + +#define NANDFCR 0x60 /* flash control register */ +#define NANDFSR 0x64 /* flash status register */ +#define NANDFECC 0x70 /* 1-bit ECC data, CS0, 1st of 4 */ +#define NAND4BITECCLOAD 0xbc /* 4-bit ECC, load saved values */ +#define NAND4BITECC 0xc0 /* 4-bit ECC data, 1st of 4 */ +#define NANDERRADDR 0xd0 /* 4-bit ECC err addr, 1st of 2 */ +#define NANDERRVAL 0xd8 /* 4-bit ECC err value, 1st of 2 */ + +static int halted(struct target *target, const char *label) +{ + if (target->state == TARGET_HALTED) + return true; + + LOG_ERROR("Target must be halted to use NAND controller (%s)", label); + return false; +} + +static int davinci_init(struct nand_device *nand) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + uint32_t nandfcr; + + if (!halted(target, "init")) + return ERROR_NAND_OPERATION_FAILED; + + /* We require something else to have configured AEMIF to talk + * to NAND chip in this range (including timings and width). + */ + target_read_u32(target, info->aemif + NANDFCR, &nandfcr); + if (!(nandfcr & (1 << info->chipsel))) { + LOG_ERROR("chip address %08" PRIx32 " not NAND-enabled?", info->data); + return ERROR_NAND_OPERATION_FAILED; + } + + /* REVISIT verify: AxCR must be in 8-bit mode, since that's all we + * tested. 16 bit support should work too; but not with 4-bit ECC. + */ + + return ERROR_OK; +} + +static int davinci_reset(struct nand_device *nand) +{ + return ERROR_OK; +} + +static int davinci_nand_ready(struct nand_device *nand, int timeout) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + uint32_t nandfsr; + + /* NOTE: return code is zero/error, else success; not ERROR_* */ + + if (!halted(target, "ready")) + return 0; + + do { + target_read_u32(target, info->aemif + NANDFSR, &nandfsr); + + if (nandfsr & 0x01) + return 1; + + alive_sleep(1); + } while (timeout-- > 0); + + return 0; +} + +static int davinci_command(struct nand_device *nand, uint8_t command) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + + if (!halted(target, "command")) + return ERROR_NAND_OPERATION_FAILED; + + target_write_u8(target, info->cmd, command); + return ERROR_OK; +} + +static int davinci_address(struct nand_device *nand, uint8_t address) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + + if (!halted(target, "address")) + return ERROR_NAND_OPERATION_FAILED; + + target_write_u8(target, info->addr, address); + return ERROR_OK; +} + +static int davinci_write_data(struct nand_device *nand, uint16_t data) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + + if (!halted(target, "write_data")) + return ERROR_NAND_OPERATION_FAILED; + + target_write_u8(target, info->data, data); + return ERROR_OK; +} + +static int davinci_read_data(struct nand_device *nand, void *data) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + + if (!halted(target, "read_data")) + return ERROR_NAND_OPERATION_FAILED; + + target_read_u8(target, info->data, data); + return ERROR_OK; +} + +/* REVISIT a bit of native code should let block reads be MUCH faster */ + +static int davinci_read_block_data(struct nand_device *nand, + uint8_t *data, int data_size) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + uint32_t nfdata = info->data; + uint32_t tmp; + + if (!halted(target, "read_block")) + return ERROR_NAND_OPERATION_FAILED; + + while (data_size >= 4) { + target_read_u32(target, nfdata, &tmp); + + data[0] = tmp; + data[1] = tmp >> 8; + data[2] = tmp >> 16; + data[3] = tmp >> 24; + + data_size -= 4; + data += 4; + } + + while (data_size > 0) { + target_read_u8(target, nfdata, data); + + data_size -= 1; + data += 1; + } + + return ERROR_OK; +} + +static int davinci_write_block_data(struct nand_device *nand, + uint8_t *data, int data_size) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + uint32_t nfdata = info->data; + uint32_t tmp; + int status; + + if (!halted(target, "write_block")) + return ERROR_NAND_OPERATION_FAILED; + + /* try the fast way first */ + status = arm_nandwrite(&info->io, data, data_size); + if (status != ERROR_NAND_NO_BUFFER) + return status; + + /* else do it slowly */ + while (data_size >= 4) { + tmp = le_to_h_u32(data); + target_write_u32(target, nfdata, tmp); + + data_size -= 4; + data += 4; + } + + while (data_size > 0) { + target_write_u8(target, nfdata, *data); + + data_size -= 1; + data += 1; + } + + return ERROR_OK; +} + +static int davinci_write_page(struct nand_device *nand, uint32_t page, + uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size) +{ + struct davinci_nand *info = nand->controller_priv; + uint8_t *ooballoc = NULL; + int status; + + if (!nand->device) + return ERROR_NAND_DEVICE_NOT_PROBED; + if (!halted(info->target, "write_page")) + return ERROR_NAND_OPERATION_FAILED; + + /* Always write both data and OOB ... we are not "raw" I/O! */ + if (!data) { + LOG_ERROR("Missing NAND data; try 'nand raw_access enable'\n"); + return ERROR_NAND_OPERATION_FAILED; + } + + /* If we're not given OOB, write 0xff where we don't write ECC codes. */ + switch (nand->page_size) { + case 512: + oob_size = 16; + break; + case 2048: + oob_size = 64; + break; + case 4096: + oob_size = 128; + break; + default: + return ERROR_NAND_OPERATION_FAILED; + } + if (!oob) { + ooballoc = malloc(oob_size); + if (!ooballoc) + return ERROR_NAND_OPERATION_FAILED; + oob = ooballoc; + memset(oob, 0x0ff, oob_size); + } + + /* REVISIT avoid wasting SRAM: unless nand->use_raw is set, + * use 512 byte chunks. Read side support will often want + * to include oob_size ... + */ + info->io.chunk_size = nand->page_size; + + status = info->write_page(nand, page, data, data_size, oob, oob_size); + free(ooballoc); + return status; +} + +static int davinci_read_page(struct nand_device *nand, uint32_t page, + uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size) +{ + struct davinci_nand *info = nand->controller_priv; + + if (!nand->device) + return ERROR_NAND_DEVICE_NOT_PROBED; + if (!halted(info->target, "read_page")) + return ERROR_NAND_OPERATION_FAILED; + + return info->read_page(nand, page, data, data_size, oob, oob_size); +} + +static void davinci_write_pagecmd(struct nand_device *nand, uint8_t cmd, uint32_t page) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + int page3 = nand->address_cycles - (nand->page_size == 512); + + /* write command ({page,otp}x{read,program} */ + target_write_u8(target, info->cmd, cmd); + + /* column address (beginning-of-page) */ + target_write_u8(target, info->addr, 0); + if (nand->page_size > 512) + target_write_u8(target, info->addr, 0); + + /* page address */ + target_write_u8(target, info->addr, page); + target_write_u8(target, info->addr, page >> 8); + if (page3) + target_write_u8(target, info->addr, page >> 16); + if (page3 == 2) + target_write_u8(target, info->addr, page >> 24); +} + +static int davinci_writepage_tail(struct nand_device *nand, + uint8_t *oob, uint32_t oob_size) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + uint8_t status; + + if (oob_size) + davinci_write_block_data(nand, oob, oob_size); + + /* non-cachemode page program */ + target_write_u8(target, info->cmd, NAND_CMD_PAGEPROG); + + if (!davinci_nand_ready(nand, 100)) + return ERROR_NAND_OPERATION_TIMEOUT; + + if (nand_read_status(nand, &status) != ERROR_OK) { + LOG_ERROR("couldn't read status"); + return ERROR_NAND_OPERATION_FAILED; + } + + if (status & NAND_STATUS_FAIL) { + LOG_ERROR("write operation failed, status: 0x%02x", status); + return ERROR_NAND_OPERATION_FAILED; + } + + return ERROR_OK; +} + +/* + * All DaVinci family chips support 1-bit ECC on a per-chipselect basis. + */ +static int davinci_write_page_ecc1(struct nand_device *nand, uint32_t page, + uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size) +{ + unsigned oob_offset; + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + const uint32_t fcr_addr = info->aemif + NANDFCR; + const uint32_t ecc1_addr = info->aemif + NANDFECC + (4 * info->chipsel); + uint32_t fcr, ecc1; + + /* Write contiguous ECC bytes starting at specified offset. + * NOTE: Linux reserves twice as many bytes as we need; and + * for 16-bit OOB, those extra bytes are discontiguous. + */ + switch (nand->page_size) { + case 512: + oob_offset = 0; + break; + case 2048: + oob_offset = 40; + break; + default: + oob_offset = 80; + break; + } + + davinci_write_pagecmd(nand, NAND_CMD_SEQIN, page); + + /* scrub any old ECC state */ + target_read_u32(target, ecc1_addr, &ecc1); + + target_read_u32(target, fcr_addr, &fcr); + fcr |= 1 << (8 + info->chipsel); + + do { + /* set "start csX 1bit ecc" bit */ + target_write_u32(target, fcr_addr, fcr); + + /* write 512 bytes */ + davinci_write_block_data(nand, data, 512); + data += 512; + data_size -= 512; + + /* read the ecc, pack to 3 bytes, and invert so the ecc + * in an erased block is correct + */ + target_read_u32(target, ecc1_addr, &ecc1); + ecc1 = (ecc1 & 0x0fff) | ((ecc1 & 0x0fff0000) >> 4); + ecc1 = ~ecc1; + + /* save correct ECC code into oob data */ + oob[oob_offset++] = (uint8_t)(ecc1); + oob[oob_offset++] = (uint8_t)(ecc1 >> 8); + oob[oob_offset++] = (uint8_t)(ecc1 >> 16); + + } while (data_size); + + /* write OOB into spare area */ + return davinci_writepage_tail(nand, oob, oob_size); +} + +/* + * Preferred "new style" ECC layout for use with 4-bit ECC. This somewhat + * slows down large page reads done with error correction (since the OOB + * is read first, so its ECC data can be used incrementally), but the + * manufacturer bad block markers are safe. Contrast: old "infix" style. + */ +static int davinci_write_page_ecc4(struct nand_device *nand, uint32_t page, + uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size) +{ + static const uint8_t ecc512[] = { + 0, 1, 2, 3, 4, /* 5== mfr badblock */ + 6, 7, /* 8..12 for BBT or JFFS2 */ 13, 14, 15, + }; + static const uint8_t ecc2048[] = { + 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, + 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + }; + static const uint8_t ecc4096[] = { + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, + 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, + 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, + 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, + 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, + }; + + struct davinci_nand *info = nand->controller_priv; + const uint8_t *l; + struct target *target = info->target; + const uint32_t fcr_addr = info->aemif + NANDFCR; + const uint32_t ecc4_addr = info->aemif + NAND4BITECC; + uint32_t fcr, ecc4; + + /* Use the same ECC layout Linux uses. For small page chips + * it's a bit cramped. + * + * NOTE: at this writing, 4KB pages have issues in Linux + * because they need more than 64 bytes of ECC data, which + * the standard ECC logic can't handle. + */ + switch (nand->page_size) { + case 512: + l = ecc512; + break; + case 2048: + l = ecc2048; + break; + default: + l = ecc4096; + break; + } + + davinci_write_pagecmd(nand, NAND_CMD_SEQIN, page); + + /* scrub any old ECC state */ + target_read_u32(target, info->aemif + NANDERRVAL, &ecc4); + + target_read_u32(target, fcr_addr, &fcr); + fcr &= ~(0x03 << 4); + fcr |= (1 << 12) | (info->chipsel << 4); + + do { + uint32_t raw_ecc[4], *p; + int i; + + /* start 4bit ecc on csX */ + target_write_u32(target, fcr_addr, fcr); + + /* write 512 bytes */ + davinci_write_block_data(nand, data, 512); + data += 512; + data_size -= 512; + + /* read the ecc, then save it into 10 bytes in the oob */ + for (i = 0; i < 4; i++) { + target_read_u32(target, ecc4_addr + 4 * i, &raw_ecc[i]); + raw_ecc[i] &= 0x03ff03ff; + } + for (i = 0, p = raw_ecc; i < 2; i++, p += 2) { + oob[*l++] = p[0] & 0xff; + oob[*l++] = ((p[0] >> 8) & 0x03) | ((p[0] >> 14) & 0xfc); + oob[*l++] = ((p[0] >> 22) & 0x0f) | ((p[1] << 4) & 0xf0); + oob[*l++] = ((p[1] >> 4) & 0x3f) | ((p[1] >> 10) & 0xc0); + oob[*l++] = (p[1] >> 18) & 0xff; + } + + } while (data_size); + + /* write OOB into spare area */ + return davinci_writepage_tail(nand, oob, oob_size); +} + +/* + * "Infix" OOB ... like Linux ECC_HW_SYNDROME. Avoided because it trashes + * manufacturer bad block markers, except on small page chips. Once you + * write to a page using this scheme, you need specialized code to update + * it (code which ignores now-invalid bad block markers). + * + * This is needed *only* to support older firmware. Older ROM Boot Loaders + * need it to read their second stage loader (UBL) into SRAM, but from then + * on the whole system can use the cleaner non-infix layouts. Systems with + * older second stage loaders (ABL/U-Boot, etc) or other system software + * (MVL 4.x/5.x kernels, filesystems, etc) may need it more generally. + */ +static int davinci_write_page_ecc4infix(struct nand_device *nand, uint32_t page, + uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size) +{ + struct davinci_nand *info = nand->controller_priv; + struct target *target = info->target; + const uint32_t fcr_addr = info->aemif + NANDFCR; + const uint32_t ecc4_addr = info->aemif + NAND4BITECC; + uint32_t fcr, ecc4; + + davinci_write_pagecmd(nand, NAND_CMD_SEQIN, page); + + /* scrub any old ECC state */ + target_read_u32(target, info->aemif + NANDERRVAL, &ecc4); + + target_read_u32(target, fcr_addr, &fcr); + fcr &= ~(0x03 << 4); + fcr |= (1 << 12) | (info->chipsel << 4); + + do { + uint32_t raw_ecc[4], *p; + uint8_t *l; + int i; + + /* start 4bit ecc on csX */ + target_write_u32(target, fcr_addr, fcr); + + /* write 512 bytes */ + davinci_write_block_data(nand, data, 512); + data += 512; + data_size -= 512; + + /* read the ecc */ + for (i = 0; i < 4; i++) { + target_read_u32(target, ecc4_addr + 4 * i, &raw_ecc[i]); + raw_ecc[i] &= 0x03ff03ff; + } + + /* skip 6 bytes of prepad, then pack 10 packed ecc bytes */ + for (i = 0, l = oob + 6, p = raw_ecc; i < 2; i++, p += 2) { + *l++ = p[0] & 0xff; + *l++ = ((p[0] >> 8) & 0x03) | ((p[0] >> 14) & 0xfc); + *l++ = ((p[0] >> 22) & 0x0f) | ((p[1] << 4) & 0xf0); + *l++ = ((p[1] >> 4) & 0x3f) | ((p[1] >> 10) & 0xc0); + *l++ = (p[1] >> 18) & 0xff; + } + + /* write this "out-of-band" data -- infix */ + davinci_write_block_data(nand, oob, 16); + oob += 16; + oob_size -= 16; + + } while (data_size); + + /* the last data and OOB writes included the spare area */ + return davinci_writepage_tail(nand, NULL, 0); +} + +static int davinci_read_page_ecc4infix(struct nand_device *nand, uint32_t page, + uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size) +{ + davinci_write_pagecmd(nand, NAND_CMD_READ0, page); + + /* large page devices need a start command */ + if (nand->page_size > 512) + davinci_command(nand, NAND_CMD_READSTART); + + if (!davinci_nand_ready(nand, 100)) + return ERROR_NAND_OPERATION_TIMEOUT; + + /* NOTE: not bothering to compute and use ECC data for now */ + + do { + /* write 512 bytes */ + davinci_read_block_data(nand, data, 512); + data += 512; + data_size -= 512; + + /* read this "out-of-band" data -- infix */ + davinci_read_block_data(nand, oob, 16); + oob += 16; + oob_size -= 16; + } while (data_size); + + return ERROR_OK; +} + +NAND_DEVICE_COMMAND_HANDLER(davinci_nand_device_command) +{ + struct davinci_nand *info; + struct target *target; + unsigned long chip, aemif; + enum ecc eccmode; + int chipsel; + + /* arguments: + * - "davinci" + * - target + * - nand chip address + * - ecc mode + * - aemif address + * Plus someday, optionally, ALE and CLE masks. + */ + if (CMD_ARGC < 5) { + LOG_ERROR("parameters: %s target " + "chip_addr hwecc_mode aemif_addr", + CMD_ARGV[0]); + goto fail; + } + + target = get_target(CMD_ARGV[1]); + if (!target) { + LOG_ERROR("invalid target %s", CMD_ARGV[1]); + goto fail; + } + + COMMAND_PARSE_NUMBER(ulong, CMD_ARGV[2], chip); + if (chip == 0) { + LOG_ERROR("Invalid NAND chip address %s", CMD_ARGV[2]); + goto fail; + } + + if (strcmp(CMD_ARGV[3], "hwecc1") == 0) + eccmode = HWECC1; + else if (strcmp(CMD_ARGV[3], "hwecc4") == 0) + eccmode = HWECC4; + else if (strcmp(CMD_ARGV[3], "hwecc4_infix") == 0) + eccmode = HWECC4_INFIX; + else { + LOG_ERROR("Invalid ecc mode %s", CMD_ARGV[3]); + goto fail; + } + + COMMAND_PARSE_NUMBER(ulong, CMD_ARGV[4], aemif); + if (aemif == 0) { + LOG_ERROR("Invalid AEMIF controller address %s", CMD_ARGV[4]); + goto fail; + } + + /* REVISIT what we'd *like* to do is look up valid ranges using + * target-specific declarations, and not even need to pass the + * AEMIF controller address. + */ + if (aemif == 0x01e00000 /* dm6446, dm357 */ + || aemif == 0x01e10000 /* dm335, dm355 */ + || aemif == 0x01d10000 /* dm365 */ + ) { + if (chip < 0x02000000 || chip >= 0x0a000000) { + LOG_ERROR("NAND address %08lx out of range?", chip); + goto fail; + } + chipsel = (chip - 0x02000000) >> 25; + } else { + LOG_ERROR("unrecognized AEMIF controller address %08lx", aemif); + goto fail; + } + + info = calloc(1, sizeof *info); + if (info == NULL) + goto fail; + + info->target = target; + info->eccmode = eccmode; + info->chipsel = chipsel; + info->aemif = aemif; + info->data = chip; + info->cmd = chip | 0x10; + info->addr = chip | 0x08; + + nand->controller_priv = info; + + info->io.target = target; + info->io.data = info->data; + + /* NOTE: for now we don't do any error correction on read. + * Nothing else in OpenOCD currently corrects read errors, + * and in any case it's *writing* that we care most about. + */ + info->read_page = nand_read_page_raw; + + switch (eccmode) { + case HWECC1: + /* ECC_HW, 1-bit corrections, 3 bytes ECC per 512 data bytes */ + info->write_page = davinci_write_page_ecc1; + break; + case HWECC4: + /* ECC_HW, 4-bit corrections, 10 bytes ECC per 512 data bytes */ + info->write_page = davinci_write_page_ecc4; + break; + case HWECC4_INFIX: + /* Same 4-bit ECC HW, with problematic page/ecc layout */ + info->read_page = davinci_read_page_ecc4infix; + info->write_page = davinci_write_page_ecc4infix; + break; + } + + return ERROR_OK; + +fail: + return ERROR_NAND_OPERATION_FAILED; +} + +struct nand_flash_controller davinci_nand_controller = { + .name = "davinci", + .nand_device_command = davinci_nand_device_command, + .init = davinci_init, + .reset = davinci_reset, + .command = davinci_command, + .address = davinci_address, + .write_data = davinci_write_data, + .read_data = davinci_read_data, + .write_page = davinci_write_page, + .read_page = davinci_read_page, + .write_block_data = davinci_write_block_data, + .read_block_data = davinci_read_block_data, + .nand_ready = davinci_nand_ready, +}; -- cgit v1.2.3