From 435c4b6aa28ec3d5a793980fc622bf96aee3eaf7 Mon Sep 17 00:00:00 2001 From: ntfreak Date: Mon, 21 Apr 2008 08:18:19 +0000 Subject: - set lpc288x[ch] svn file props git-svn-id: svn://svn.berlios.de/openocd/trunk@599 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/flash/lpc288x.c | 1130 +++++++++++++++++++++++++-------------------------- src/flash/lpc288x.h | 82 ++-- 2 files changed, 606 insertions(+), 606 deletions(-) (limited to 'src/flash') diff --git a/src/flash/lpc288x.c b/src/flash/lpc288x.c index 372c3201..9be71380 100644 --- a/src/flash/lpc288x.c +++ b/src/flash/lpc288x.c @@ -1,565 +1,565 @@ -/*************************************************************************** - * Copyright (C) 2008 by * - * Karl RobinSod * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - ***************************************************************************/ - -/*************************************************************************** -* There are some things to notice -* -* You need to unprotect flash sectors each time you connect the OpenOCD -* Dumping 1MB takes about 60 Seconds -* Full erase (sectors 0-22 inclusive) takes 2-4 seconds -* Writing 1MB takes 88 seconds -* - ***************************************************************************/ -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "replacements.h" - -#include "lpc288x.h" - -#include "flash.h" -#include "target.h" -#include "log.h" -#include "binarybuffer.h" -#include "types.h" - -#include -#include -#include - -#define LOAD_TIMER_ERASE 0 -#define LOAD_TIMER_WRITE 1 - -#define FLASH_PAGE_SIZE 512 - -/* LPC288X control registers */ -#define DBGU_CIDR 0x8000507C -/* LPC288X flash registers */ -#define F_CTRL 0x80102000 /* Flash control register R/W 0x5 */ -#define F_STAT 0x80102004 /* Flash status register RO 0x45 */ -#define F_PROG_TIME 0x80102008 /* Flash program time register R/W 0 */ -#define F_WAIT 0x80102010 /* Flash read wait state register R/W 0xC004 */ -#define F_CLK_TIME 0x8010201C /* Flash clock divider for 66 kHz generation R/W 0 */ -#define F_INTEN_CLR 0x80102FD8 /* Clear interrupt enable bits WO - */ -#define F_INTEN_SET 0x80102FDC /* Set interrupt enable bits WO - */ -#define F_INT_STAT 0x80102FE0 /* Interrupt status bits RO 0 */ -#define F_INTEN 0x80102FE4 /* Interrupt enable bits RO 0 */ -#define F_INT_CLR 0x80102FE8 /* Clear interrupt status bits WO */ -#define F_INT_SET 0x80102FEC /* Set interrupt status bits WO - */ -#define FLASH_PD 0x80005030 /* Allows turning off the Flash memory for power savings. R/W 1*/ -#define FLASH_INIT 0x80005034 /* Monitors Flash readiness, such as recovery from Power Down mode. R/W -*/ - -/* F_CTRL bits */ -#define FC_CS 0x0001 -#define FC_FUNC 0x0002 -#define FC_WEN 0x0004 -#define FC_RD_LATCH 0x0020 -#define FC_PROTECT 0x0080 -#define FC_SET_DATA 0x0400 -#define FC_RSSL 0x0800 -#define FC_PROG_REQ 0x1000 -#define FC_CLR_BUF 0x4000 -#define FC_LOAD_REQ 0x8000 -/* F_STAT bits */ -#define FS_DONE 0x0001 -#define FS_PROGGNT 0x0002 -#define FS_RDY 0x0004 -#define FS_ERR 0x0020 -/* F_PROG_TIME */ -#define FPT_TIME_MASK 0x7FFF - -#define FPT_ENABLE 0x8000 -/* F_WAIT */ -#define FW_WAIT_STATES_MASK 0x00FF -#define FW_SET_MASK 0xC000 - -/* F_CLK_TIME */ -#define FCT_CLK_DIV_MASK 0x0FFF - - - -int lpc288x_register_commands(struct command_context_s *cmd_ctx); -int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank); -int lpc288x_erase(struct flash_bank_s *bank, int first, int last); -int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last); -int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count); -int lpc288x_probe(struct flash_bank_s *bank); -int lpc288x_auto_probe(struct flash_bank_s *bank); -int lpc288x_erase_check(struct flash_bank_s *bank); -int lpc288x_protect_check(struct flash_bank_s *bank); -int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size); -void lpc288x_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode); -u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout); -void lpc288x_load_timer(int erase, struct target_s *target); -void lpc288x_set_flash_clk(struct flash_bank_s *bank); -u32 lpc288x_system_ready(struct flash_bank_s *bank); -int lpc288x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); - -flash_driver_t lpc288x_flash = -{ - .name = "lpc288x", - .register_commands = lpc288x_register_commands, - .flash_bank_command = lpc288x_flash_bank_command, - .erase = lpc288x_erase, - .protect = lpc288x_protect, - .write = lpc288x_write, - .probe = lpc288x_probe, - .auto_probe = lpc288x_probe, - .erase_check = lpc288x_erase_check, - .protect_check = lpc288x_protect_check, - .info = lpc288x_info -}; - - -int lpc288x_register_commands(struct command_context_s *cmd_ctx) -{ - return ERROR_OK; -} - - - -u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout) -{ - u32 status; - target_t *target = bank->target; - do - { - usleep(1000); - timeout--; - target_read_u32(target, F_STAT, &status); - }while (((status & FS_DONE) == 0) && timeout); - - if(timeout == 0) - { - LOG_DEBUG("Timedout!"); - return ERROR_FLASH_OPERATION_FAILED; - } - return ERROR_OK; -} - -/* Read device id register and fill in driver info structure */ -int lpc288x_read_part_info(struct flash_bank_s *bank) -{ - lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv; - target_t *target = bank->target; - u32 cidr, status; - int sectornum; - - int i = 0; - u32 offset; - - if (lpc288x_info->cidr == 0x0102100A) - return ERROR_OK; /* already probed, multiple probes may cause memory leak, not allowed */ - - /* Read and parse chip identification register */ - target_read_u32(target, DBGU_CIDR, &cidr); - - if (cidr != 0x0102100A) - { - LOG_WARNING("Cannot identify target as an LPC288X (%08X)",cidr); - return ERROR_FLASH_OPERATION_FAILED; - } - - lpc288x_info->cidr = cidr; - lpc288x_info->sector_size_break = 0x000F0000; - lpc288x_info->target_name = "LPC288x"; - - /* setup the sector info... */ - offset = bank->base; - bank->num_sectors = 23; - bank->sectors = malloc(sizeof(flash_sector_t) * 23); - - for (i = 0; i < 15; i++) - { - bank->sectors[i].offset = offset; - bank->sectors[i].size = 64 * 1024; - offset += bank->sectors[i].size; - bank->sectors[i].is_erased = -1; - bank->sectors[i].is_protected = 1; - } - for (i = 15; i < 23; i++) - { - bank->sectors[i].offset = offset; - bank->sectors[i].size = 8 * 1024; - offset += bank->sectors[i].size; - bank->sectors[i].is_erased = -1; - bank->sectors[i].is_protected = 1; - } - - return ERROR_OK; -} - -int lpc288x_protect_check(struct flash_bank_s *bank) -{ - return ERROR_OK; -} - -/* flash_bank LPC288x 0 0 0 0 - */ -int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank) -{ - lpc288x_flash_bank_t *lpc288x_info; - int i; - - if (argc < 6) - { - LOG_WARNING("incomplete flash_bank LPC288x configuration"); - return ERROR_FLASH_BANK_INVALID; - } - - lpc288x_info = malloc(sizeof(lpc288x_flash_bank_t)); - bank->driver_priv = lpc288x_info; - - /* part wasn't probed for info yet */ - lpc288x_info->cidr = 0; - lpc288x_info->cclk = strtoul(args[6], NULL, 0); - - return ERROR_OK; -} - -/* -The frequency is the AHB clock frequency divided by (CLK_DIV × -3) + 1. This must be programmed such that the Flash -Programming clock frequency is 66 kHz ± 20%. - AHB = 12 MHz ? - 12000000/66000 = 182 - CLK_DIV = 60 ? -*/ -void lpc288x_set_flash_clk(struct flash_bank_s *bank) -{ - u32 clk_time; - lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv; - clk_time = (lpc288x_info->cclk / 66000) / 3; - target_write_u32(bank->target, F_CTRL, FC_CS | FC_WEN ); - target_write_u32(bank->target, F_CLK_TIME, clk_time); -} - -/* -AHB tcyc (in ns) 83 ns - -LOAD_TIMER_ERASE FPT_TIME = ((400,000,000 / AHB tcyc (in ns)) - 2) / 512 - = 9412 (9500) (AN10548 9375) -LOAD_TIMER_WRITE FPT_TIME = ((1,000,000 / AHB tcyc (in ns)) - 2) / 512 - = 23 (75) (AN10548 72 - is this wrong?) - -TODO: Sort out timing calcs ;) -*/ -void lpc288x_load_timer(int erase, struct target_s *target) -{ - if(erase == LOAD_TIMER_ERASE) - { - target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 9500); - } - else - { - target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 75); - } -} - - - -u32 lpc288x_system_ready(struct flash_bank_s *bank) -{ - lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv; - if (lpc288x_info->cidr == 0) - { - return ERROR_FLASH_BANK_NOT_PROBED; - } - - if (bank->target->state != TARGET_HALTED) - { - return ERROR_TARGET_NOT_HALTED; - } - return ERROR_OK; -} - -int lpc288x_erase_check(struct flash_bank_s *bank) -{ - u32 buffer, test_bytes; - u32 addr, sector, i, status = lpc288x_system_ready(bank); /* probed? halted? */ - if(status != ERROR_OK) - { - LOG_INFO("Processor not halted/not probed"); - return status; - } - - return ERROR_OK; -} - -int lpc288x_erase(struct flash_bank_s *bank, int first, int last) -{ - u32 status; - int sector; - target_t *target = bank->target; - - status = lpc288x_system_ready(bank); /* probed? halted? */ - if(status != ERROR_OK) - { - return status; - } - - if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { - LOG_INFO("Bad sector range"); - return ERROR_FLASH_SECTOR_INVALID; - } - - /* Configure the flash controller timing */ - lpc288x_set_flash_clk(bank); - - for (sector = first; sector <= last; sector++) - { - if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) - { - return ERROR_FLASH_OPERATION_FAILED; - } - - lpc288x_load_timer(LOAD_TIMER_ERASE,target); - - target_write_u32( target, - bank->sectors[sector].offset, - 0x00); - - target_write_u32( target, - F_CTRL, - FC_PROG_REQ | - FC_PROTECT | - FC_CS); - } - if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) - { - return ERROR_FLASH_OPERATION_FAILED; - } - return ERROR_OK; - -} - - -int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count) -{ - u8 page_buffer[FLASH_PAGE_SIZE]; - u32 i, status, source_offset,dest_offset; - target_t *target = bank->target; - u32 bytes_remaining = count; - u32 first_sector, last_sector, sector, page; - - /* probed? halted? */ - status = lpc288x_system_ready(bank); - if(status != ERROR_OK) - { - return status; - } - - /* Initialise search indices */ - first_sector = last_sector = 0xffffffff; - - /* validate the write range... */ - for(i = 0; i < bank->num_sectors; i++) - { - if((offset >= bank->sectors[i].offset) && - (offset < (bank->sectors[i].offset + bank->sectors[i].size)) && - (first_sector == 0xffffffff)) - { - first_sector = i; - /* all writes must start on a sector boundary... */ - if (offset % bank->sectors[i].size) - { - LOG_INFO("offset 0x%x breaks required alignment 0x%x", offset, bank->sectors[i].size); - return ERROR_FLASH_DST_BREAKS_ALIGNMENT; - } - } - if(((offset + count) > bank->sectors[i].offset) && - ((offset + count) <= (bank->sectors[i].offset + bank->sectors[i].size)) && - (last_sector == 0xffffffff)) - { - last_sector = i; - } - } - - /* Range check... */ - if (first_sector == 0xffffffff || last_sector == 0xffffffff) - { - LOG_INFO("Range check failed %x %x", offset, count); - return ERROR_FLASH_DST_OUT_OF_BANK; - } - - /* Configure the flash controller timing */ - lpc288x_set_flash_clk(bank); - - /* initialise the offsets */ - source_offset = 0; - dest_offset = 0; - - for (sector=first_sector; sector<=last_sector; sector++) - { - for(page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++) - { - if(bytes_remaining == 0) - { - count = 0; - memset(page_buffer, 0xFF, FLASH_PAGE_SIZE); - } - else if (bytes_remaining < FLASH_PAGE_SIZE) - { - count = bytes_remaining; - memset(page_buffer, 0xFF, FLASH_PAGE_SIZE); - memcpy(page_buffer, &buffer[source_offset], count); - } - else - { - count = FLASH_PAGE_SIZE; - memcpy(page_buffer, &buffer[source_offset], count); - } - - /* Wait for flash to become ready */ - if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) - { - return ERROR_FLASH_OPERATION_FAILED; - } - - /* fill flash data latches with 1's */ - target_write_u32(target, F_CTRL, - FC_CS | - FC_SET_DATA | - FC_WEN | - FC_FUNC ); - - target_write_u32(target, F_CTRL, - FC_CS | - FC_WEN | - FC_FUNC ); - /*would be better to use the clean target_write_buffer() interface but - it seems not to be a LOT slower.... - bulk_write_memory() is no quicker :(*/ -#if 1 - if (target->type->write_memory(target, offset + dest_offset, 4, 128, page_buffer) != ERROR_OK) - { - LOG_ERROR("Write failed s %x p %x", sector, page); - return ERROR_FLASH_OPERATION_FAILED; - } -#else - if(target_write_buffer(target, offset + dest_offset, FLASH_PAGE_SIZE, page_buffer) != ERROR_OK) - { - LOG_INFO("Write to flash buffer failed"); - return ERROR_FLASH_OPERATION_FAILED; - } -#endif - dest_offset += FLASH_PAGE_SIZE; - source_offset += count; - bytes_remaining -= count; - - lpc288x_load_timer(LOAD_TIMER_WRITE, target); - - target_write_u32( target, - F_CTRL, - FC_PROG_REQ | - FC_PROTECT | - FC_FUNC | - FC_CS); - - - } - } - - return ERROR_OK; -} - - -int lpc288x_probe(struct flash_bank_s *bank) -{ - /* we only deal with LPC2888 so flash config is fixed - */ - lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv; - int retval; - - if (lpc288x_info->cidr != 0) - { - return ERROR_OK; /* already probed */ - } - - if (bank->target->state != TARGET_HALTED) - { - return ERROR_TARGET_NOT_HALTED; - } - - retval = lpc288x_read_part_info(bank); - if (retval != ERROR_OK) - return retval; - - return ERROR_OK; -} - - -int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size) -{ - snprintf(buf, buf_size, "lpc288x flash driver"); - return ERROR_OK; -} - -int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last) -{ - int lockregion, status; - u32 value; - target_t *target = bank->target; - - /* probed? halted? */ - status = lpc288x_system_ready(bank); - if(status != ERROR_OK) - { - return status; - } - - if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { - return ERROR_FLASH_SECTOR_INVALID; - } - - /* Configure the flash controller timing */ - lpc288x_set_flash_clk(bank); - - for (lockregion = first; lockregion <= last; lockregion++) - { - if(set) - { - /* write an odd value to base addy to protect... */ - value = 0x01; - } - else - { - /* write an even value to base addy to unprotect... */ - value = 0x00; - } - target_write_u32( target, - bank->sectors[lockregion].offset, - value); - - target_write_u32( target, - F_CTRL, - FC_LOAD_REQ | - FC_PROTECT | - FC_WEN | - FC_FUNC | - FC_CS); - } - - return ERROR_OK; -} - +/*************************************************************************** + * Copyright (C) 2008 by * + * Karl RobinSod * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +/*************************************************************************** +* There are some things to notice +* +* You need to unprotect flash sectors each time you connect the OpenOCD +* Dumping 1MB takes about 60 Seconds +* Full erase (sectors 0-22 inclusive) takes 2-4 seconds +* Writing 1MB takes 88 seconds +* + ***************************************************************************/ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "replacements.h" + +#include "lpc288x.h" + +#include "flash.h" +#include "target.h" +#include "log.h" +#include "binarybuffer.h" +#include "types.h" + +#include +#include +#include + +#define LOAD_TIMER_ERASE 0 +#define LOAD_TIMER_WRITE 1 + +#define FLASH_PAGE_SIZE 512 + +/* LPC288X control registers */ +#define DBGU_CIDR 0x8000507C +/* LPC288X flash registers */ +#define F_CTRL 0x80102000 /* Flash control register R/W 0x5 */ +#define F_STAT 0x80102004 /* Flash status register RO 0x45 */ +#define F_PROG_TIME 0x80102008 /* Flash program time register R/W 0 */ +#define F_WAIT 0x80102010 /* Flash read wait state register R/W 0xC004 */ +#define F_CLK_TIME 0x8010201C /* Flash clock divider for 66 kHz generation R/W 0 */ +#define F_INTEN_CLR 0x80102FD8 /* Clear interrupt enable bits WO - */ +#define F_INTEN_SET 0x80102FDC /* Set interrupt enable bits WO - */ +#define F_INT_STAT 0x80102FE0 /* Interrupt status bits RO 0 */ +#define F_INTEN 0x80102FE4 /* Interrupt enable bits RO 0 */ +#define F_INT_CLR 0x80102FE8 /* Clear interrupt status bits WO */ +#define F_INT_SET 0x80102FEC /* Set interrupt status bits WO - */ +#define FLASH_PD 0x80005030 /* Allows turning off the Flash memory for power savings. R/W 1*/ +#define FLASH_INIT 0x80005034 /* Monitors Flash readiness, such as recovery from Power Down mode. R/W -*/ + +/* F_CTRL bits */ +#define FC_CS 0x0001 +#define FC_FUNC 0x0002 +#define FC_WEN 0x0004 +#define FC_RD_LATCH 0x0020 +#define FC_PROTECT 0x0080 +#define FC_SET_DATA 0x0400 +#define FC_RSSL 0x0800 +#define FC_PROG_REQ 0x1000 +#define FC_CLR_BUF 0x4000 +#define FC_LOAD_REQ 0x8000 +/* F_STAT bits */ +#define FS_DONE 0x0001 +#define FS_PROGGNT 0x0002 +#define FS_RDY 0x0004 +#define FS_ERR 0x0020 +/* F_PROG_TIME */ +#define FPT_TIME_MASK 0x7FFF + +#define FPT_ENABLE 0x8000 +/* F_WAIT */ +#define FW_WAIT_STATES_MASK 0x00FF +#define FW_SET_MASK 0xC000 + +/* F_CLK_TIME */ +#define FCT_CLK_DIV_MASK 0x0FFF + + + +int lpc288x_register_commands(struct command_context_s *cmd_ctx); +int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank); +int lpc288x_erase(struct flash_bank_s *bank, int first, int last); +int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last); +int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count); +int lpc288x_probe(struct flash_bank_s *bank); +int lpc288x_auto_probe(struct flash_bank_s *bank); +int lpc288x_erase_check(struct flash_bank_s *bank); +int lpc288x_protect_check(struct flash_bank_s *bank); +int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size); +void lpc288x_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode); +u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout); +void lpc288x_load_timer(int erase, struct target_s *target); +void lpc288x_set_flash_clk(struct flash_bank_s *bank); +u32 lpc288x_system_ready(struct flash_bank_s *bank); +int lpc288x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); + +flash_driver_t lpc288x_flash = +{ + .name = "lpc288x", + .register_commands = lpc288x_register_commands, + .flash_bank_command = lpc288x_flash_bank_command, + .erase = lpc288x_erase, + .protect = lpc288x_protect, + .write = lpc288x_write, + .probe = lpc288x_probe, + .auto_probe = lpc288x_probe, + .erase_check = lpc288x_erase_check, + .protect_check = lpc288x_protect_check, + .info = lpc288x_info +}; + + +int lpc288x_register_commands(struct command_context_s *cmd_ctx) +{ + return ERROR_OK; +} + + + +u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout) +{ + u32 status; + target_t *target = bank->target; + do + { + usleep(1000); + timeout--; + target_read_u32(target, F_STAT, &status); + }while (((status & FS_DONE) == 0) && timeout); + + if(timeout == 0) + { + LOG_DEBUG("Timedout!"); + return ERROR_FLASH_OPERATION_FAILED; + } + return ERROR_OK; +} + +/* Read device id register and fill in driver info structure */ +int lpc288x_read_part_info(struct flash_bank_s *bank) +{ + lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv; + target_t *target = bank->target; + u32 cidr, status; + int sectornum; + + int i = 0; + u32 offset; + + if (lpc288x_info->cidr == 0x0102100A) + return ERROR_OK; /* already probed, multiple probes may cause memory leak, not allowed */ + + /* Read and parse chip identification register */ + target_read_u32(target, DBGU_CIDR, &cidr); + + if (cidr != 0x0102100A) + { + LOG_WARNING("Cannot identify target as an LPC288X (%08X)",cidr); + return ERROR_FLASH_OPERATION_FAILED; + } + + lpc288x_info->cidr = cidr; + lpc288x_info->sector_size_break = 0x000F0000; + lpc288x_info->target_name = "LPC288x"; + + /* setup the sector info... */ + offset = bank->base; + bank->num_sectors = 23; + bank->sectors = malloc(sizeof(flash_sector_t) * 23); + + for (i = 0; i < 15; i++) + { + bank->sectors[i].offset = offset; + bank->sectors[i].size = 64 * 1024; + offset += bank->sectors[i].size; + bank->sectors[i].is_erased = -1; + bank->sectors[i].is_protected = 1; + } + for (i = 15; i < 23; i++) + { + bank->sectors[i].offset = offset; + bank->sectors[i].size = 8 * 1024; + offset += bank->sectors[i].size; + bank->sectors[i].is_erased = -1; + bank->sectors[i].is_protected = 1; + } + + return ERROR_OK; +} + +int lpc288x_protect_check(struct flash_bank_s *bank) +{ + return ERROR_OK; +} + +/* flash_bank LPC288x 0 0 0 0 + */ +int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank) +{ + lpc288x_flash_bank_t *lpc288x_info; + int i; + + if (argc < 6) + { + LOG_WARNING("incomplete flash_bank LPC288x configuration"); + return ERROR_FLASH_BANK_INVALID; + } + + lpc288x_info = malloc(sizeof(lpc288x_flash_bank_t)); + bank->driver_priv = lpc288x_info; + + /* part wasn't probed for info yet */ + lpc288x_info->cidr = 0; + lpc288x_info->cclk = strtoul(args[6], NULL, 0); + + return ERROR_OK; +} + +/* +The frequency is the AHB clock frequency divided by (CLK_DIV × +3) + 1. This must be programmed such that the Flash +Programming clock frequency is 66 kHz ± 20%. + AHB = 12 MHz ? + 12000000/66000 = 182 + CLK_DIV = 60 ? +*/ +void lpc288x_set_flash_clk(struct flash_bank_s *bank) +{ + u32 clk_time; + lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv; + clk_time = (lpc288x_info->cclk / 66000) / 3; + target_write_u32(bank->target, F_CTRL, FC_CS | FC_WEN ); + target_write_u32(bank->target, F_CLK_TIME, clk_time); +} + +/* +AHB tcyc (in ns) 83 ns + +LOAD_TIMER_ERASE FPT_TIME = ((400,000,000 / AHB tcyc (in ns)) - 2) / 512 + = 9412 (9500) (AN10548 9375) +LOAD_TIMER_WRITE FPT_TIME = ((1,000,000 / AHB tcyc (in ns)) - 2) / 512 + = 23 (75) (AN10548 72 - is this wrong?) + +TODO: Sort out timing calcs ;) +*/ +void lpc288x_load_timer(int erase, struct target_s *target) +{ + if(erase == LOAD_TIMER_ERASE) + { + target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 9500); + } + else + { + target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 75); + } +} + + + +u32 lpc288x_system_ready(struct flash_bank_s *bank) +{ + lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv; + if (lpc288x_info->cidr == 0) + { + return ERROR_FLASH_BANK_NOT_PROBED; + } + + if (bank->target->state != TARGET_HALTED) + { + return ERROR_TARGET_NOT_HALTED; + } + return ERROR_OK; +} + +int lpc288x_erase_check(struct flash_bank_s *bank) +{ + u32 buffer, test_bytes; + u32 addr, sector, i, status = lpc288x_system_ready(bank); /* probed? halted? */ + if(status != ERROR_OK) + { + LOG_INFO("Processor not halted/not probed"); + return status; + } + + return ERROR_OK; +} + +int lpc288x_erase(struct flash_bank_s *bank, int first, int last) +{ + u32 status; + int sector; + target_t *target = bank->target; + + status = lpc288x_system_ready(bank); /* probed? halted? */ + if(status != ERROR_OK) + { + return status; + } + + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) + { + LOG_INFO("Bad sector range"); + return ERROR_FLASH_SECTOR_INVALID; + } + + /* Configure the flash controller timing */ + lpc288x_set_flash_clk(bank); + + for (sector = first; sector <= last; sector++) + { + if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) + { + return ERROR_FLASH_OPERATION_FAILED; + } + + lpc288x_load_timer(LOAD_TIMER_ERASE,target); + + target_write_u32( target, + bank->sectors[sector].offset, + 0x00); + + target_write_u32( target, + F_CTRL, + FC_PROG_REQ | + FC_PROTECT | + FC_CS); + } + if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) + { + return ERROR_FLASH_OPERATION_FAILED; + } + return ERROR_OK; + +} + + +int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count) +{ + u8 page_buffer[FLASH_PAGE_SIZE]; + u32 i, status, source_offset,dest_offset; + target_t *target = bank->target; + u32 bytes_remaining = count; + u32 first_sector, last_sector, sector, page; + + /* probed? halted? */ + status = lpc288x_system_ready(bank); + if(status != ERROR_OK) + { + return status; + } + + /* Initialise search indices */ + first_sector = last_sector = 0xffffffff; + + /* validate the write range... */ + for(i = 0; i < bank->num_sectors; i++) + { + if((offset >= bank->sectors[i].offset) && + (offset < (bank->sectors[i].offset + bank->sectors[i].size)) && + (first_sector == 0xffffffff)) + { + first_sector = i; + /* all writes must start on a sector boundary... */ + if (offset % bank->sectors[i].size) + { + LOG_INFO("offset 0x%x breaks required alignment 0x%x", offset, bank->sectors[i].size); + return ERROR_FLASH_DST_BREAKS_ALIGNMENT; + } + } + if(((offset + count) > bank->sectors[i].offset) && + ((offset + count) <= (bank->sectors[i].offset + bank->sectors[i].size)) && + (last_sector == 0xffffffff)) + { + last_sector = i; + } + } + + /* Range check... */ + if (first_sector == 0xffffffff || last_sector == 0xffffffff) + { + LOG_INFO("Range check failed %x %x", offset, count); + return ERROR_FLASH_DST_OUT_OF_BANK; + } + + /* Configure the flash controller timing */ + lpc288x_set_flash_clk(bank); + + /* initialise the offsets */ + source_offset = 0; + dest_offset = 0; + + for (sector=first_sector; sector<=last_sector; sector++) + { + for(page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++) + { + if(bytes_remaining == 0) + { + count = 0; + memset(page_buffer, 0xFF, FLASH_PAGE_SIZE); + } + else if (bytes_remaining < FLASH_PAGE_SIZE) + { + count = bytes_remaining; + memset(page_buffer, 0xFF, FLASH_PAGE_SIZE); + memcpy(page_buffer, &buffer[source_offset], count); + } + else + { + count = FLASH_PAGE_SIZE; + memcpy(page_buffer, &buffer[source_offset], count); + } + + /* Wait for flash to become ready */ + if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) + { + return ERROR_FLASH_OPERATION_FAILED; + } + + /* fill flash data latches with 1's */ + target_write_u32(target, F_CTRL, + FC_CS | + FC_SET_DATA | + FC_WEN | + FC_FUNC ); + + target_write_u32(target, F_CTRL, + FC_CS | + FC_WEN | + FC_FUNC ); + /*would be better to use the clean target_write_buffer() interface but + it seems not to be a LOT slower.... + bulk_write_memory() is no quicker :(*/ +#if 1 + if (target->type->write_memory(target, offset + dest_offset, 4, 128, page_buffer) != ERROR_OK) + { + LOG_ERROR("Write failed s %x p %x", sector, page); + return ERROR_FLASH_OPERATION_FAILED; + } +#else + if(target_write_buffer(target, offset + dest_offset, FLASH_PAGE_SIZE, page_buffer) != ERROR_OK) + { + LOG_INFO("Write to flash buffer failed"); + return ERROR_FLASH_OPERATION_FAILED; + } +#endif + dest_offset += FLASH_PAGE_SIZE; + source_offset += count; + bytes_remaining -= count; + + lpc288x_load_timer(LOAD_TIMER_WRITE, target); + + target_write_u32( target, + F_CTRL, + FC_PROG_REQ | + FC_PROTECT | + FC_FUNC | + FC_CS); + + + } + } + + return ERROR_OK; +} + + +int lpc288x_probe(struct flash_bank_s *bank) +{ + /* we only deal with LPC2888 so flash config is fixed + */ + lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv; + int retval; + + if (lpc288x_info->cidr != 0) + { + return ERROR_OK; /* already probed */ + } + + if (bank->target->state != TARGET_HALTED) + { + return ERROR_TARGET_NOT_HALTED; + } + + retval = lpc288x_read_part_info(bank); + if (retval != ERROR_OK) + return retval; + + return ERROR_OK; +} + + +int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size) +{ + snprintf(buf, buf_size, "lpc288x flash driver"); + return ERROR_OK; +} + +int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last) +{ + int lockregion, status; + u32 value; + target_t *target = bank->target; + + /* probed? halted? */ + status = lpc288x_system_ready(bank); + if(status != ERROR_OK) + { + return status; + } + + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) + { + return ERROR_FLASH_SECTOR_INVALID; + } + + /* Configure the flash controller timing */ + lpc288x_set_flash_clk(bank); + + for (lockregion = first; lockregion <= last; lockregion++) + { + if(set) + { + /* write an odd value to base addy to protect... */ + value = 0x01; + } + else + { + /* write an even value to base addy to unprotect... */ + value = 0x00; + } + target_write_u32( target, + bank->sectors[lockregion].offset, + value); + + target_write_u32( target, + F_CTRL, + FC_LOAD_REQ | + FC_PROTECT | + FC_WEN | + FC_FUNC | + FC_CS); + } + + return ERROR_OK; +} + diff --git a/src/flash/lpc288x.h b/src/flash/lpc288x.h index 9af57091..0ba99c04 100644 --- a/src/flash/lpc288x.h +++ b/src/flash/lpc288x.h @@ -1,41 +1,41 @@ -/*************************************************************************** - * Copyright (C) 2008 by * - * Karl RobinSod * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - ***************************************************************************/ - -#ifndef lpc288x_H -#define lpc288x_H - -#include "flash.h" -#include "target.h" - -typedef struct lpc288x_flash_bank_s -{ - u32 working_area; - u32 working_area_size; - - /* chip id register */ - u32 cidr; - char * target_name; - u32 cclk; - - u32 sector_size_break; -} lpc288x_flash_bank_t; - -#endif /* lpc288x_H */ - +/*************************************************************************** + * Copyright (C) 2008 by * + * Karl RobinSod * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +#ifndef lpc288x_H +#define lpc288x_H + +#include "flash.h" +#include "target.h" + +typedef struct lpc288x_flash_bank_s +{ + u32 working_area; + u32 working_area_size; + + /* chip id register */ + u32 cidr; + char * target_name; + u32 cclk; + + u32 sector_size_break; +} lpc288x_flash_bank_t; + +#endif /* lpc288x_H */ + -- cgit v1.2.3