From 72f5449e4bfc1d6b656812ddc3fc2a4280333577 Mon Sep 17 00:00:00 2001
From: oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Sat, 16 May 2009 14:57:02 +0000
Subject: Freddie Chopin <freddie_chopin@op.pl> move files about to where they
 belong

git-svn-id: svn://svn.berlios.de/openocd/trunk@1798 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 src/target/board/hitex_stm32-performancestick.cfg | 50 +++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 src/target/board/hitex_stm32-performancestick.cfg

(limited to 'src/target/board/hitex_stm32-performancestick.cfg')

diff --git a/src/target/board/hitex_stm32-performancestick.cfg b/src/target/board/hitex_stm32-performancestick.cfg
new file mode 100644
index 00000000..da0ceb61
--- /dev/null
+++ b/src/target/board/hitex_stm32-performancestick.cfg
@@ -0,0 +1,50 @@
+# Hitex stm32 performance stick
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME stm32_hitex
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+# set jtag speed
+jtag_khz 500
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+# The CPU
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # See STM Document RM0008
+  # Section 26.6.3
+   set _CPUTAPID 0x3ba00477
+}
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+# The boundery scan register, leave the "expected-id" undefined.
+jtag newtap $_CHIPNAME bs  -irlen 5 -ircapture 0x1 -irmask 0x1 
+
+# configure str750 connected to jtag chain
+jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0x0f
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
+
+#
+flash bank stm32x 0 0 0 0 0
+
+# For more information about the configuration files, take a look at:
+# openocd.texi
-- 
cgit v1.2.3