From 54916e30bb8855338e570f657abe5e326a9824fa Mon Sep 17 00:00:00 2001 From: oharboe Date: Fri, 1 Aug 2008 11:43:01 +0000 Subject: The reset routine now works w/LPC2148 out of the box. git-svn-id: svn://svn.berlios.de/openocd/trunk@885 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/target/lpc2148.cfg | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) (limited to 'src/target') diff --git a/src/target/target/lpc2148.cfg b/src/target/target/lpc2148.cfg index 64e65b12..ab339562 100644 --- a/src/target/target/lpc2148.cfg +++ b/src/target/target/lpc2148.cfg @@ -2,28 +2,22 @@ jtag_nsrst_delay 200 jtag_ntrst_delay 200 +# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate +# JTAG, power-on reset is not enough, i.e. you need to perform a +# reset before being able to talk to the LPC2148, attach is not +# possible. + #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst srst_pulls_trst -#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough -jtag_reset 1 1 -jtag_reset 0 0 - #jtag scan chain -#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target -#target arm7tdmi target arm7tdmi little 0 arm7tdmi-s_r4 - target_script 0 reset event/lpc2148_reset.script working_area 0 0x40000000 0x4000 nobackup #flash bank lpc2000 0 0 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 - -# For more information about the configuration files, take a look at: -# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger -- cgit v1.2.3