From 7cd2617384f4ac620c468343c1f2009fbfa2fc79 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 24 Dec 2010 18:50:41 -0800 Subject: initial SWD transport (SWD infrastructure #2) This piggy backs on JTAG so it's not yet pretty, but that seems unavoidable so far given today's OpenOCD internals. SWD init and data transfer are unfinished and untested, but that should cause no regressions, and will be addressed by the time drivers start using this infrastructure. Checking in whould get the code working better sooner, and turn up any structural/architectural issues while they're easier to fix. The debug adapter drivers will provide simple SWD driver structs with methods that kick in as needed (instead of JTAG). So far just one adapter driver has been updated (not yet ready to use or circulate). The biggest issues are probably - fault handling, where the ARM Debug Interface V5 pipelining needs work in both JTAG and SWD modes and - missing rewrite of block I/O code to work on both of our Cortex-ready transports (Current code is hard-wired to JTAG); relates also to the pipelining issue. - omitted support to activate/deactivate SWO/SWV trace (this is technically trivial, but configuring what to trace is NOT. Signed-off-by: David Brownell ---- doc/openocd.texi | 17 ++ src/jtag/core.c | 3 src/jtag/interface.h | 4 src/jtag/jtag.h | 2 src/jtag/swd.h | 114 +++++++++++++++++++ src/jtag/tcl.c | 2 src/target/adi_v5_swd.c | 281 ++++++++++++++++++++++++++++++++++++++++++++++-- src/target/arm_adi_v5.c | 8 + src/target/arm_adi_v5.h | 3 9 files changed, 425 insertions(+), 9 deletions(-) --- src/target/adi_v5_swd.c | 281 ++++++++++++++++++++++++++++++++++++++++++++++-- src/target/arm_adi_v5.c | 8 +- src/target/arm_adi_v5.h | 3 + 3 files changed, 284 insertions(+), 8 deletions(-) (limited to 'src/target') diff --git a/src/target/adi_v5_swd.c b/src/target/adi_v5_swd.c index f103e4b0..39f38572 100644 --- a/src/target/adi_v5_swd.c +++ b/src/target/adi_v5_swd.c @@ -20,8 +20,26 @@ /** * @file - * This file implements SWD transport support for cores implementing - the ARM Debug Interface version 5 (ADIv5). + * Utilities to support ARM "Serial Wire Debug" (SWD), a low pin-count debug + * link protocol used in cases where JTAG is not wanted. This is coupled to + * recent versions of ARM's "CoreSight" debug framework. This specific code + * is a transport level interface, with "target/arm_adi_v5.[hc]" code + * understanding operation semantics, shared with the JTAG transport. + * + * Single-DAP support only. + * + * for details, see "ARM IHI 0031A" + * ARM Debug Interface v5 Architecture Specification + * especially section 5.3 for SWD protocol + * + * On many chips (most current Cortex-M3 parts) SWD is a run-time alternative + * to JTAG. Boards may support one or both. There are also SWD-only chips, + * (using SW-DP not SWJ-DP). + * + * Even boards that also support JTAG can benefit from SWD support, because + * usually there's no way to access the SWO trace view mechanism in JTAG mode. + * That is, trace access may require SWD support. + * */ #ifdef HAVE_CONFIG_H @@ -32,6 +50,83 @@ #include "arm_adi_v5.h" #include +#include +#include + +#include + + + +static int swd_queue_dp_read(struct adiv5_dap *dap, unsigned reg, + uint32_t *data) +{ + // REVISIT status return vs ack ... + return swd->read_reg(swd_cmd(true, false, reg), data); +} + +static int swd_queue_idcode_read(struct adiv5_dap *dap, + uint8_t *ack, uint32_t *data) +{ + int status = swd_queue_dp_read(dap, DP_IDCODE, data); + if (status < 0) + return status; + *ack = status; + // ?? + return ERROR_OK; +} + +static int (swd_queue_dp_write)(struct adiv5_dap *dap, unsigned reg, + uint32_t data) +{ + // REVISIT status return vs ack ... + return swd->write_reg(swd_cmd(false, false, reg), data); +} + + +static int (swd_queue_ap_read)(struct adiv5_dap *dap, unsigned reg, + uint32_t *data) +{ + // REVISIT APSEL ... + // REVISIT status return ... + return swd->read_reg(swd_cmd(true, true, reg), data); +} + +static int (swd_queue_ap_write)(struct adiv5_dap *dap, unsigned reg, + uint32_t data) +{ + // REVISIT APSEL ... + // REVISIT status return ... + return swd->write_reg(swd_cmd(false, true, reg), data); +} + +static int (swd_queue_ap_abort)(struct adiv5_dap *dap, uint8_t *ack) +{ + return ERROR_FAIL; +} + +/** Executes all queued DAP operations. */ +static int swd_run(struct adiv5_dap *dap) +{ + /* for now the SWD interface hard-wires a zero-size queue. */ + + /* FIXME but we still need to check and scrub + * any hardware errors ... + */ + return ERROR_OK; +} + +const struct dap_ops swd_dap_ops = { + .is_swd = true, + + .queue_idcode_read = swd_queue_idcode_read, + .queue_dp_read = swd_queue_dp_read, + .queue_dp_write = swd_queue_dp_write, + .queue_ap_read = swd_queue_ap_read, + .queue_ap_write = swd_queue_ap_write, + .queue_ap_abort = swd_queue_ap_abort, + .run = swd_run, +}; + /* * This represents the bits which must be sent out on TMS/SWDIO to * switch a DAP implemented using an SWJ-DP module into SWD mode. @@ -48,7 +143,7 @@ static const uint8_t jtag2swd_bitseq[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* Switching sequence enables SWD and disables JTAG * NOTE: bits in the DP's IDCODE may expose the need for - * an old/deprecated sequence (0xb6 0xed). + * an old/obsolete/deprecated sequence (0xb6 0xed). */ 0x9e, 0xe7, /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high, @@ -72,12 +167,13 @@ static const uint8_t jtag2swd_bitseq[] = { */ int dap_to_swd(struct target *target) { + struct arm *arm = target_to_arm(target); int retval; LOG_DEBUG("Enter SWD mode"); - /* REVISIT it's nasty to need to make calls to a "jtag" - * subsystem if the link isn't in JTAG mode... + /* REVISIT it's ugly to need to make calls to a "jtag" + * subsystem if the link may not be in JTAG mode... */ retval = jtag_add_tms_seq(8 * sizeof(jtag2swd_bitseq), @@ -85,8 +181,181 @@ int dap_to_swd(struct target *target) if (retval == ERROR_OK) retval = jtag_execute_queue(); - /* REVISIT set up the DAP's ops vector for SWD mode. */ + /* set up the DAP's ops vector for SWD mode. */ + arm->dap->ops = &swd_dap_ops; return retval; } + + +COMMAND_HANDLER(handle_swd_wcr) +{ + int retval; + struct target *target = get_current_target(CMD_CTX); + struct arm *arm = target_to_arm(target); +struct adiv5_dap *dap = arm->dap; + uint32_t wcr; + unsigned trn, scale = 0; + + + switch (CMD_ARGC) { + /* no-args: just dump state */ + case 0: + //retval = swd_queue_dp_read(dap, DP_WCR, &wcr); + retval = dap_queue_dp_read(dap, DP_WCR, &wcr); + if (retval == ERROR_OK) + dap->ops->run(dap); + if (retval != ERROR_OK) { + LOG_ERROR("can't read WCR?"); + return retval; + } + + command_print(CMD_CTX, + "turnaround=%d, prescale=%d", + WCR_TO_TRN(wcr), + WCR_TO_PRESCALE(wcr)); + return ERROR_OK; + + case 2: /* TRN and prescale */ + COMMAND_PARSE_NUMBER(uint, CMD_ARGV[1], scale); + if (scale > 7) { + LOG_ERROR("prescale %d is too big", scale); + return ERROR_FAIL; + } + /* FALL THROUGH */ + + case 1: /* TRN only */ + COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], trn); + if (trn < 1 || trn > 4) { + LOG_ERROR("turnaround %d is invalid", trn); + return ERROR_FAIL; + } + + wcr = ((trn - 1) << 8) | scale; + /* FIXME + * write WCR ... + * then, re-init adapter with new TRN + */ + LOG_ERROR("can't yet modify WCR"); + return ERROR_FAIL; + + default: /* too many arguments */ + return ERROR_COMMAND_SYNTAX_ERROR; + } +} + +static const struct command_registration swd_commands[] = { + { + /* + * Set up SWD and JTAG targets identically, unless/until + * infrastructure improves ... meanwhile, ignore all + * JTAG-specific stuff like IR length for SWD. + * + * REVISIT can we verify "just one SWD DAP" here/early? + */ + .name = "newdap", + .jim_handler = jim_jtag_newtap, + .mode = COMMAND_CONFIG, + .help = "declare a new SWD DAP" + }, + { + .name = "wcr", + .handler = handle_swd_wcr, + .mode = COMMAND_ANY, + .help = "display or update DAP's WCR register", + .usage = "turnaround (1..4), prescale (0..7)", + }, + + /* REVISIT -- add a command for SWV trace on/off */ + COMMAND_REGISTRATION_DONE +}; + +static const struct command_registration swd_handlers[] = { + { + .name = "swd", + .mode = COMMAND_ANY, + .help = "SWD command group", + .chain = swd_commands, + }, + COMMAND_REGISTRATION_DONE +}; + +static int swd_select(struct command_context *ctx) +{ + struct target *target = get_current_target(ctx); + int retval; + + retval = register_commands(ctx, NULL, swd_handlers); + + if (retval != ERROR_OK) + return retval; + + /* be sure driver is in SWD mode; start + * with hardware default TRN (1), it can be changed later + */ + if (!swd || !swd->read_reg || !swd->write_reg || !swd->init) { + LOG_DEBUG("no SWD driver?"); + return ERROR_FAIL; + } + + retval = swd->init(1); + if (retval != ERROR_OK) { + LOG_DEBUG("can't init SWD driver"); + return retval; + } + + /* force DAP into SWD mode (not JTAG) */ + retval = dap_to_swd(target); + + return retval; +} + +static int swd_init(struct command_context *ctx) +{ + struct target *target = get_current_target(ctx); + struct arm *arm = target_to_arm(target); +struct adiv5_dap *dap = arm->dap; + uint32_t idcode; + int status; + + + /* FIXME validate transport config ... is the + * configured DAP present (check IDCODE)? + * Is *only* one DAP configured? + * + * MUST READ IDCODE + */ + + /* Note, debugport_init() does setup too */ + + uint8_t ack; + + status = swd_queue_idcode_read(dap, &ack, &idcode); + + if (status == ERROR_OK) + LOG_INFO("SWD IDCODE %#8.8x", idcode); + + return status; + +} + +static struct transport swd_transport = { + .name = "swd", + .select = swd_select, + .init = swd_init, +}; + +static void swd_constructor(void) __attribute__((constructor)); +static void swd_constructor(void) +{ + transport_register(&swd_transport); +} + +/** Returns true if the current debug session + * is using SWD as its transport. + */ +bool transport_is_swd(void) +{ + return get_current_transport() == &swd_transport; +} diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c index 81edba4e..69a3ce7a 100644 --- a/src/target/arm_adi_v5.c +++ b/src/target/arm_adi_v5.c @@ -913,8 +913,12 @@ int ahbap_debugport_init(struct adiv5_dap *dap) LOG_DEBUG(" "); - /* JTAG-DP or SWJ-DP, in JTAG mode */ - dap->ops = &jtag_dp_ops; + /* JTAG-DP or SWJ-DP, in JTAG mode + * ... for SWD mode this is patched as part + * of link switchover + */ + if (!dap->ops) + dap->ops = &jtag_dp_ops; /* Default MEM-AP setup. * diff --git a/src/target/arm_adi_v5.h b/src/target/arm_adi_v5.h index 6c1808a5..f64f7c84 100644 --- a/src/target/arm_adi_v5.h +++ b/src/target/arm_adi_v5.h @@ -59,6 +59,9 @@ #define DP_SELECT 0x8 /* JTAG: r/w; SWD: write */ #define DP_RDBUFF 0xC /* read-only */ +#define WCR_TO_TRN(wcr) (1 + (3 & ((wcr)) >> 8)) /* 1..4 clocks */ +#define WCR_TO_PRESCALE(wcr) (7 & ((wcr))) /* impl defined */ + /* Fields of the DP's AP ABORT register */ #define DAPABORT (1 << 0) #define STKCMPCLR (1 << 1) /* SWD-only */ -- cgit v1.2.3