From 140d6c8e7948710a764965075bfaa700efd09802 Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:44:43 +0000 Subject: Move TCL script files -- Step 1 of 2: - Move src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am: - Add dist-hook to include such files under src/tcl in the distribution. - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'. - Add uninstall-hook to remove the installed script files. - Change paths to (un)install script files in '$(pkgdatadir)/scripts'. git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/tcl/board/linksys_nslu2.cfg | 8 ++++++++ 1 file changed, 8 insertions(+) create mode 100644 src/tcl/board/linksys_nslu2.cfg (limited to 'src/tcl/board/linksys_nslu2.cfg') diff --git a/src/tcl/board/linksys_nslu2.cfg b/src/tcl/board/linksys_nslu2.cfg new file mode 100644 index 00000000..52984107 --- /dev/null +++ b/src/tcl/board/linksys_nslu2.cfg @@ -0,0 +1,8 @@ +# This is for the LinkSys (CISCO) NSLU2 board +# It is an Intel XSCALE IXP420 CPU. + +source [find target/ixp42x.cfg] +# The _TARGETNAME is set by the above. + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0 + -- cgit v1.2.3