From dbbc9c41f7db210b0a4e226540a28e0a8a5019bf Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:49:24 +0000 Subject: Move TCL script files -- Step 2 of 2: - Move src/tcl to tcl/. - Update top Makefile.am to use new path name. git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/tcl/target/lpc2478.cfg | 35 ----------------------------------- 1 file changed, 35 deletions(-) delete mode 100644 src/tcl/target/lpc2478.cfg (limited to 'src/tcl/target/lpc2478.cfg') diff --git a/src/tcl/target/lpc2478.cfg b/src/tcl/target/lpc2478.cfg deleted file mode 100644 index 84675705..00000000 --- a/src/tcl/target/lpc2478.cfg +++ /dev/null @@ -1,35 +0,0 @@ -# Testing feeedback wanted! -set _CHIPNAME lpc2478 -set _ENDIAN little -set _CPUTAPID 0x4f1f0f0f - -# Use RCLK. If RCLK is not available fall back to 500kHz. -# -# Depending on cabling you might be able to eek this up to 2000kHz. -jtag_rclk 500 - -jtag_nsrst_delay 200 -jtag_ntrst_delay 200 - -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config trst_and_srst srst_pulls_trst - - -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 - - -$_TARGETNAME configure -event reset-init { - # Force target into ARM state - soft_reset_halt - # FIX!!!! should we remap the range below??? Is this applicable to - # Copied from LPC2148. - #do not remap 0x0000-0x0020 to anything but the flash - mwb 0xE01FC040 0x01 -} - - -flash bank lpc2000 0x0 0x7D000 0 0 0 lpc2000_v2 12000 calc_checksum -- cgit v1.2.3