From 140d6c8e7948710a764965075bfaa700efd09802 Mon Sep 17 00:00:00 2001
From: zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Wed, 27 May 2009 06:44:43 +0000
Subject: Move TCL script files -- Step 1 of 2: - Move
 src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing
 rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am
 handling of *.cfg and *.tcl files in top Makefile.am:   - Add dist-hook to
 include such files under src/tcl in the distribution.   - Add
 install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.   - Add
 uninstall-hook to remove the installed script files. - Change paths to
 (un)install script files in '$(pkgdatadir)/scripts'.

git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 src/tcl/target/samsung_s3c6410.cfg | 49 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 src/tcl/target/samsung_s3c6410.cfg

(limited to 'src/tcl/target/samsung_s3c6410.cfg')

diff --git a/src/tcl/target/samsung_s3c6410.cfg b/src/tcl/target/samsung_s3c6410.cfg
new file mode 100644
index 00000000..4991c811
--- /dev/null
+++ b/src/tcl/target/samsung_s3c6410.cfg
@@ -0,0 +1,49 @@
+# -*- tcl -*-
+# Target configuration for the Samsung s3c6410 system on chip
+# Tested on a SMDK6410
+# Processor       : ARM1176
+# Info:   JTAG device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0)
+# [Duane Ellis 27/nov/2008: Above 0x0032409d appears to be copy/paste from other places]
+# [and I do not believe it to be accurate, hence the 0xffffffff below]
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME s3c6410
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+  # this defaults to a bigendian
+   set  _ENDIAN little
+}
+
+if { [info exists BSTAPID ] } {
+   set _BSTAPID $BSTAPID
+} else {
+  # force an error till we get a good number
+   set _BSTAPID 0x2b900f0f
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0x07b76f0f
+}
+
+#jtag scan chain
+
+# I think the "unknown" is the boundry scan tap
+jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0xe  -expected-id $_BSTAPID
+jtag newtap $_CHIPNAME cpu     -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm11 -endian $_ENDIAN  -chain-position $_TARGETNAME -variant arm1176
+
+jtag_nsrst_delay 500
+jtag_ntrst_delay 500
+
+#reset configuration
+reset_config trst_and_srst
-- 
cgit v1.2.3