From 6d06c893d1b162157dde5ef72d79af86047c9f9e Mon Sep 17 00:00:00 2001 From: oharboe Date: Mon, 9 Feb 2009 10:01:09 +0000 Subject: Andi - better dram setup git-svn-id: svn://svn.berlios.de/openocd/trunk@1367 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/board/x300t.cfg | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'src') diff --git a/src/target/board/x300t.cfg b/src/target/board/x300t.cfg index edc9be6c..985f44ed 100644 --- a/src/target/board/x300t.cfg +++ b/src/target/board/x300t.cfg @@ -1,5 +1,5 @@ # This is for the T-Home X300T / X301T IPTV box, -# which are based on IPTV reference designs from Kiss/Cisco KMM-32** +# which are based on IPTV reference designs from Kiss/Cisco KMM-3*** # # It has Sigma Designs SMP8634 chip. source [find target/smp8634.cfg] @@ -11,7 +11,20 @@ $_TARGETNAME configure -event reset-init { x300t_init } flash bank cfi 0xac000000 0x100000 2 2 0 proc x300t_init { } { - # Setup SDRAM config and flash mapping - # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4 - mww 0x6f010 0x48000000 + # Setup SDRAM config and flash mapping + # initialize ram + mww 0xa003fffc 3 + mww 0xa003fffc 2 + mww 0xa0030000 0xE34111BA + mww 0xa003fffc 0xa4444 + mww 0xa003fffc 0 + + # remap boot vector in CPU local RAM + mww 0xa006f000 0x60000 + + # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4 + mww 0x0006f010 0x48000000 + + # map flash addr to REG_BASE_cpu_block + LR_XENV_LOCATION (normally done by XOS) + mww 0x00061ff0 0x48000000 } -- cgit v1.2.3