From dce422516ab1e28bb8045c9c081c73562dd1f163 Mon Sep 17 00:00:00 2001
From: Piotr Esden-Tempski <piotr@esden.net>
Date: Tue, 3 Aug 2010 22:04:46 -0700
Subject: Added support for the Lisa/L jtag LEDs.

---
 src/jtag/drivers/ft2232.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)

(limited to 'src')

diff --git a/src/jtag/drivers/ft2232.c b/src/jtag/drivers/ft2232.c
index ecfa17f2..7440f0c9 100644
--- a/src/jtag/drivers/ft2232.c
+++ b/src/jtag/drivers/ft2232.c
@@ -188,6 +188,7 @@ static int signalyzer_init(void);
 static int signalyzer_h_init(void);
 static int ktlink_init(void);
 static int redbee_init(void);
+static int lisa_l_init(void);
 
 /* reset procedures for supported layouts */
 static void ftx23_reset(int trst, int srst);
@@ -210,6 +211,7 @@ static void flyswatter_jtag_blink(void);
 static void turtle_jtag_blink(void);
 static void signalyzer_h_blink(void);
 static void ktlink_blink(void);
+static void lisa_l_blink(void);
 
 /* common transport support options */
 
@@ -304,8 +306,9 @@ static const struct ft2232_layout  ft2232_layouts[] =
     	        .channel = INTERFACE_B,
 	},
 	{ .name = "lisa-l",
-		.init = usbjtag_init,
+		.init = lisa_l_init,
 		.reset = ftx23_reset,
+		.blink = lisa_l_blink,
 		.channel = INTERFACE_B,
 	},
 	{ .name = NULL, /* END OF TABLE */ },
@@ -3098,6 +3101,39 @@ static int cortino_jtag_init(void)
 	return ERROR_OK;
 }
 
+static int lisa_l_init(void)
+{
+	uint8_t  buf[3];
+	uint32_t bytes_written;
+
+	/*
+	 * NOTE:  This is now _specific_ to the "usbjtag" layout.
+	 * Don't try cram any more layouts into this.
+	 */
+	ftx232_dbus_init();
+
+	nTRST    = 0x10;
+	nTRSTnOE = 0x10;
+	nSRST    = 0x40;
+	nSRSTnOE = 0x40;
+
+	high_output = 0x00;
+	high_direction = 0x18;
+
+	/* initialize high port */
+	buf[0] = 0x82; /* command "set data bits high byte" */
+	buf[1] = high_output;
+	buf[2] = high_direction;
+	LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+	if (ft2232_write(buf, sizeof(buf), &bytes_written) != ERROR_OK)
+	{
+		LOG_ERROR("couldn't initialize FT2232 with 'lisa_l' layout");
+		return ERROR_JTAG_INIT_FAILED;
+	}
+
+	return ftx232_dbus_write();
+}
 static void olimex_jtag_blink(void)
 {
 	/* Olimex ARM-USB-OCD has a LED connected to ACBUS3
@@ -3150,6 +3186,25 @@ static void turtle_jtag_blink(void)
 	buffer_write(high_direction);
 }
 
+static void lisa_l_blink(void)
+{
+	/*
+	 * Lisa/L has two LEDs connected to BCBUS3 and ACBUS4
+	 */
+	if (high_output & 0x10)
+	{
+		high_output = 0x08;
+	}
+	else
+	{
+		high_output = 0x10;
+	}
+
+	buffer_write(0x82);
+	buffer_write(high_output);
+	buffer_write(high_direction);
+}
+
 static int ft2232_quit(void)
 {
 #if BUILD_FT2232_FTD2XX == 1
-- 
cgit v1.2.3