From ec0f06db114d1cc9d1d59acd8f4e3b32414d5b8e Mon Sep 17 00:00:00 2001 From: drath Date: Fri, 11 Aug 2006 17:49:41 +0000 Subject: - added support for FreeBSD ppi (parallel port access similar to /dev/parport on linux) (thanks to Darius for this patch) - unified 'ftd2xx' and 'ftdi2232' into a single interface 'ft2232'. The library used to access the hardware is choosen during configure with --enable-ft2232_ftd2xx or --enable-ft2232-libftdi. git-svn-id: svn://svn.berlios.de/openocd/trunk@83 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/Makefile.am | 4 +- src/jtag/Makefile.am | 14 +- src/jtag/ft2232.c | 1228 ++++++++++++++++++++++++++++++++++++++++++++++++++ src/jtag/ftd2xx.c | 1103 --------------------------------------------- src/jtag/ftdi2232.c | 633 -------------------------- src/jtag/jtag.c | 30 +- src/jtag/jtag.h | 1 + src/jtag/parport.c | 17 +- 8 files changed, 1274 insertions(+), 1756 deletions(-) create mode 100644 src/jtag/ft2232.c delete mode 100644 src/jtag/ftd2xx.c delete mode 100644 src/jtag/ftdi2232.c (limited to 'src') diff --git a/src/Makefile.am b/src/Makefile.am index 2647fd5e..208041f1 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -16,7 +16,7 @@ else MINGWLDADD = endif -if FTDI2232 +if FT2232_LIBFTDI FTDI2232LIB = -lftdi else FTDI2232LIB = @@ -32,7 +32,7 @@ else FTD2XXLDADD = -lftd2xx endif -if FTD2XX +if FT2232_FTD2XX FTD2XXLIB = $(FTD2XXLDADD) else FTD2XXLIB = diff --git a/src/jtag/Makefile.am b/src/jtag/Makefile.am index bb9337aa..ec46111e 100644 --- a/src/jtag/Makefile.am +++ b/src/jtag/Makefile.am @@ -25,16 +25,16 @@ else PARPORTFILES = endif -if FTDI2232 -FTDI2232FILES = ftdi2232.c +if FT2232_LIBFTDI +FT2232FILES = ft2232.c else -FTDI2232FILES = +FT2232FILES = endif -if FTD2XX -FTD2XXFILES = ftd2xx.c +if FT2232_FTD2XX +FT2232FILES = ft2232.c else -FTD2XXFILES = +FT2232FILES = endif if AMTJTAGACCEL @@ -49,6 +49,6 @@ else EP93XXFILES = endif -libjtag_a_SOURCES = jtag.c $(BITBANGFILES) $(PARPORTFILES) $(FTDI2232FILES) $(FTD2XXFILES) $(AMTJTAGACCELFILES) $(EP93XXFILES) +libjtag_a_SOURCES = jtag.c $(BITBANGFILES) $(PARPORTFILES) $(FT2232FILES) $(AMTJTAGACCELFILES) $(EP93XXFILES) noinst_HEADERS = bitbang.h jtag.h diff --git a/src/jtag/ft2232.c b/src/jtag/ft2232.c new file mode 100644 index 00000000..64975825 --- /dev/null +++ b/src/jtag/ft2232.c @@ -0,0 +1,1228 @@ +/*************************************************************************** + * Copyright (C) 2004, 2006 by Dominic Rath * + * Dominic.Rath@gmx.de * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#if IS_CYGWIN == 1 +#include "windows.h" +#undef ERROR +#endif + +#include "replacements.h" + +/* project specific includes */ +#include "log.h" +#include "types.h" +#include "jtag.h" +#include "configuration.h" +#include "time_support.h" + +/* system includes */ +#include +#include +#include + +/* FT2232 access library includes */ +#if BUILD_FT2232_FTD2XX == 1 +#include +#elif BUILD_FT2232_LIBFTDI == 1 +#include +#endif + +#include +#include + +/* enable this to debug io latency + */ +#if 0 +#define _DEBUG_USB_IO_ +#endif + +/* enable this to debug communication + */ +#if 0 +#define _DEBUG_USB_COMMS_ +#endif + +int ft2232_execute_queue(void); + +int ft2232_speed(int speed); +int ft2232_register_commands(struct command_context_s *cmd_ctx); +int ft2232_init(void); +int ft2232_quit(void); + +int ft2232_handle_device_desc_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); +int ft2232_handle_layout_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); +int ft2232_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); + +char *ft2232_device_desc = NULL; +char *ft2232_layout = NULL; +u16 ft2232_vid = 0x0403; +u16 ft2232_pid = 0x6010; + +typedef struct ft2232_layout_s +{ + char* name; + int(*init)(void); + void(*reset)(int trst, int srst); +} ft2232_layout_t; + +int usbjtag_init(void); +int jtagkey_init(void); +void usbjtag_reset(int trst, int srst); +void jtagkey_reset(int trst, int srst); + +ft2232_layout_t ft2232_layouts[] = +{ + {"usbjtag", usbjtag_init, usbjtag_reset}, + {"jtagkey", jtagkey_init, jtagkey_reset}, + {"jtagkey_prototype_v1", jtagkey_init, jtagkey_reset}, + {NULL, NULL, NULL}, +}; + +static u8 nTRST, nTRSTnOE, nSRST, nSRSTnOE; + +static ft2232_layout_t *layout; +static u8 low_output = 0x0; +static u8 low_direction = 0x0; +static u8 high_output = 0x0; +static u8 high_direction = 0x0; + +#if BUILD_FT2232_FTD2XX == 1 +static FT_HANDLE ftdih = NULL; +#elif BUILD_FT2232_LIBFTDI == 1 +static struct ftdi_context ftdic; +#endif + +static u8 *ft2232_buffer = NULL; +static int ft2232_buffer_size = 0; +static int ft2232_read_pointer = 0; +static int ft2232_expect_read = 0; +#define FT2232_BUFFER_SIZE 131072 +#define BUFFER_ADD ft2232_buffer[ft2232_buffer_size++] +#define BUFFER_READ ft2232_buffer[ft2232_read_pointer++] + +jtag_interface_t ft2232_interface = +{ + + .name = "ft2232", + + .execute_queue = ft2232_execute_queue, + + .support_statemove = 1, + + .speed = ft2232_speed, + .register_commands = ft2232_register_commands, + .init = ft2232_init, + .quit = ft2232_quit, +}; + +int ft2232_write(u8 *buf, int size, u32* bytes_written) +{ +#if BUILD_FT2232_FTD2XX == 1 + FT_STATUS status; + DWORD dw_bytes_written; + if ((status = FT_Write(ftdih, buf, size, &dw_bytes_written)) != FT_OK) + { + *bytes_written = dw_bytes_written; + ERROR("FT_Write returned: %i", status); + return ERROR_JTAG_DEVICE_ERROR; + } + else + { + *bytes_written = dw_bytes_written; + return ERROR_OK; + } +#elif BUILD_FT2232_LIBFTDI == 1 + int retval; + if ((retval = ftdi_write_data(&ftdic, buf, size)) < 0) + { + *bytes_written = 0; + ERROR("ftdi_write_data: %s", ftdi_get_error_string(&ftdic)); + return ERROR_JTAG_DEVICE_ERROR; + } + else + { + *bytes_written = retval; + return ERROR_OK; + } +#endif +} + +int ft2232_read(u8* buf, int size, u32* bytes_read) +{ +#if BUILD_FT2232_FTD2XX == 1 + DWORD dw_bytes_read; + FT_STATUS status; + if ((status = FT_Read(ftdih, buf, size, &dw_bytes_read)) != FT_OK) + { + *bytes_read = dw_bytes_read; + ERROR("FT_Read returned: %i", status); + return ERROR_JTAG_DEVICE_ERROR; + } + *bytes_read = dw_bytes_read; + return ERROR_OK; + +#elif BUILD_FT2232_LIBFTDI == 1 + int retval; + int timeout = 100; + *bytes_read = 0; + + while ((*bytes_read < size) && timeout--) + { + if ((retval = ftdi_read_data(&ftdic, buf + *bytes_read, size - *bytes_read)) < 0) + { + *bytes_read = 0; + ERROR("ftdi_read_data: %s", ftdi_get_error_string(&ftdic)); + return ERROR_JTAG_DEVICE_ERROR; + } + *bytes_read += retval; + } + return ERROR_OK; +#endif +} + +int ft2232_speed(int speed) +{ + u8 buf[3]; + int retval; + u32 bytes_written; + + buf[0] = 0x86; /* command "set divisor" */ + buf[1] = speed & 0xff; /* valueL (0=6MHz, 1=3MHz, 2=1.5MHz, ...*/ + buf[2] = (speed >> 8) & 0xff; /* valueH */ + + DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + if (((retval = ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + ERROR("couldn't set FT2232 TCK speed"); + return retval; + } + + return ERROR_OK; +} + +int ft2232_register_commands(struct command_context_s *cmd_ctx) +{ + register_command(cmd_ctx, NULL, "ft2232_device_desc", ft2232_handle_device_desc_command, + COMMAND_CONFIG, NULL); + register_command(cmd_ctx, NULL, "ft2232_layout", ft2232_handle_layout_command, + COMMAND_CONFIG, NULL); + register_command(cmd_ctx, NULL, "ft2232_vid_pid", ft2232_handle_vid_pid_command, + COMMAND_CONFIG, NULL); + return ERROR_OK; +} + +void ft2232_end_state(state) +{ + if (tap_move_map[state] != -1) + end_state = state; + else + { + ERROR("BUG: %i is not a valid end state", state); + exit(-1); + } +} + +void ft2232_read_scan(enum scan_type type, u8* buffer, int scan_size) +{ + int num_bytes = ((scan_size + 7) / 8); + int bits_left = scan_size; + int cur_byte = 0; + + while(num_bytes-- > 1) + { + buffer[cur_byte] = BUFFER_READ; + cur_byte++; + bits_left -= 8; + } + + buffer[cur_byte] = 0x0; + + if (bits_left > 1) + { + buffer[cur_byte] = BUFFER_READ >> 1; + } + + buffer[cur_byte] = (buffer[cur_byte] | ((BUFFER_READ & 0x02) << 6)) >> (8 - bits_left); + +} + +void ft2232_debug_dump_buffer(void) +{ + int i; + char line[256]; + char *line_p = line; + + for (i = 0; i < ft2232_buffer_size; i++) + { + line_p += snprintf(line_p, 256 - (line_p - line), "%2.2x ", ft2232_buffer[i]); + if (i % 16 == 15) + { + DEBUG("%s", line); + line_p = line; + } + } + + if (line_p != line) + DEBUG("%s", line); +} + +int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) +{ + jtag_command_t *cmd; + u8 *buffer; + int scan_size; + enum scan_type type; + int retval; + u32 bytes_written; + u32 bytes_read; + +#ifdef _DEBUG_USB_IO_ + struct timeval start, inter, inter2, end; + struct timeval d_inter, d_inter2, d_end; +#endif + +#ifdef _DEBUG_USB_COMMS_ + DEBUG("write buffer (size %i):", ft2232_buffer_size); + ft2232_debug_dump_buffer(); +#endif + +#ifdef _DEBUG_USB_IO_ + gettimeofday(&start, NULL); +#endif + + if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) + { + ERROR("couldn't write MPSSE commands to FT2232"); + exit(-1); + } + +#ifdef _DEBUG_USB_IO_ + gettimeofday(&inter, NULL); +#endif + + if (ft2232_expect_read) + { + int timeout = 100; + ft2232_buffer_size = 0; + +#ifdef _DEBUG_USB_IO_ + gettimeofday(&inter2, NULL); +#endif + + if ((retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read)) != ERROR_OK) + { + ERROR("couldn't read from FT2232"); + exit(-1); + } + +#ifdef _DEBUG_USB_IO_ + gettimeofday(&end, NULL); + + timeval_subtract(&d_inter, &inter, &start); + timeval_subtract(&d_inter2, &inter2, &start); + timeval_subtract(&d_end, &end, &start); + + INFO("inter: %i.%i, inter2: %i.%i end: %i.%i", d_inter.tv_sec, d_inter.tv_usec, d_inter2.tv_sec, d_inter2.tv_usec, d_end.tv_sec, d_end.tv_usec); +#endif + + + ft2232_buffer_size = bytes_read; + + if (ft2232_expect_read != ft2232_buffer_size) + { + ERROR("ft2232_expect_read (%i) != ft2232_buffer_size (%i) (%i retries)", ft2232_expect_read, ft2232_buffer_size, 100 - timeout); + ft2232_debug_dump_buffer(); + + exit(-1); + } + +#ifdef _DEBUG_USB_COMMS_ + DEBUG("read buffer (%i retries): %i bytes", 100 - timeout, ft2232_buffer_size); + ft2232_debug_dump_buffer(); +#endif + } + + ft2232_expect_read = 0; + ft2232_read_pointer = 0; + + cmd = first; + while (cmd != last) + { + switch (cmd->type) + { + case JTAG_SCAN: + type = jtag_scan_type(cmd->cmd.scan); + if (type != SCAN_OUT) + { + scan_size = jtag_scan_size(cmd->cmd.scan); + buffer = calloc(CEIL(scan_size, 8), 1); + ft2232_read_scan(type, buffer, scan_size); + jtag_read_buffer(buffer, cmd->cmd.scan); + free(buffer); + } + break; + default: + break; + } + cmd = cmd->next; + } + + ft2232_buffer_size = 0; + + return ERROR_OK; +} + +void ft2232_add_pathmove(pathmove_command_t *cmd) +{ + int num_states = cmd->num_states; + u8 tms_byte; + int state_count; + + state_count = 0; + while (num_states) + { + tms_byte = 0x0; + int bit_count = 0; + + /* command "Clock Data to TMS/CS Pin (no Read)" */ + BUFFER_ADD = 0x4b; + /* number of states remaining */ + BUFFER_ADD = (num_states % 7) - 1; + + while (num_states % 7) + { + if (tap_transitions[cur_state].low == cmd->path[state_count]) + buf_set_u32(&tms_byte, bit_count++, 1, 0x0); + else if (tap_transitions[cur_state].high == cmd->path[state_count]) + buf_set_u32(&tms_byte, bit_count++, 1, 0x1); + else + { + ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_strings[cur_state], tap_state_strings[cmd->path[state_count]]); + exit(-1); + } + + cur_state = cmd->path[state_count]; + state_count++; + num_states--; + } + + BUFFER_ADD = tms_byte; + } + + end_state = cur_state; +} + +void ft2232_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size) +{ + int num_bytes = (scan_size + 7) / 8; + int bits_left = scan_size; + int cur_byte = 0; + int last_bit; + + if ((!ir_scan && (cur_state != TAP_SD)) || (ir_scan && (cur_state != TAP_SI))) + { + /* command "Clock Data to TMS/CS Pin (no Read)" */ + BUFFER_ADD = 0x4b; + /* scan 7 bit */ + BUFFER_ADD = 0x6; + /* TMS data bits */ + if (ir_scan) + { + BUFFER_ADD = TAP_MOVE(cur_state, TAP_SI); + cur_state = TAP_SI; + } + else + { + BUFFER_ADD = TAP_MOVE(cur_state, TAP_SD); + cur_state = TAP_SD; + } + //DEBUG("added TMS scan (no read)"); + } + + /* add command for complete bytes */ + if (num_bytes > 1) + { + if (type == SCAN_IO) + { + /* Clock Data Bytes In and Out LSB First */ + BUFFER_ADD = 0x39; + //DEBUG("added TDI bytes (io %i)", num_bytes); + } + else if (type == SCAN_OUT) + { + /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */ + BUFFER_ADD = 0x19; + //DEBUG("added TDI bytes (o)"); + } + else if (type == SCAN_IN) + { + /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */ + BUFFER_ADD = 0x28; + //DEBUG("added TDI bytes (i %i)", num_bytes); + } + BUFFER_ADD = (num_bytes-2) & 0xff; + BUFFER_ADD = ((num_bytes-2) >> 8) & 0xff; + } + if (type != SCAN_IN) + { + /* add complete bytes */ + while(num_bytes-- > 1) + { + BUFFER_ADD = buffer[cur_byte]; + cur_byte++; + bits_left -= 8; + } + } + if (type == SCAN_IN) + { + bits_left -= 8 * (num_bytes - 1); + } + + /* the most signifcant bit is scanned during TAP movement */ + if (type != SCAN_IN) + last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1; + else + last_bit = 0; + + /* process remaining bits but the last one */ + if (bits_left > 1) + { + if (type == SCAN_IO) + { + /* Clock Data Bits In and Out LSB First */ + BUFFER_ADD = 0x3b; + //DEBUG("added TDI bits (io) %i", bits_left - 1); + } + else if (type == SCAN_OUT) + { + /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ + BUFFER_ADD = 0x1b; + //DEBUG("added TDI bits (o)"); + } + else if (type == SCAN_IN) + { + /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ + BUFFER_ADD = 0x2a; + //DEBUG("added TDI bits (i %i)", bits_left - 1); + } + BUFFER_ADD = bits_left - 2; + if (type != SCAN_IN) + BUFFER_ADD = buffer[cur_byte]; + } + + /* move from Shift-IR/DR to end state */ + if (type != SCAN_OUT) + { + /* Clock Data to TMS/CS Pin with Read */ + BUFFER_ADD = 0x6b; + //DEBUG("added TMS scan (read)"); + } + else + { + /* Clock Data to TMS/CS Pin (no Read) */ + BUFFER_ADD = 0x4b; + //DEBUG("added TMS scan (no read)"); + } + BUFFER_ADD = 0x6; + BUFFER_ADD = TAP_MOVE(cur_state, end_state) | (last_bit << 7); + cur_state = end_state; + +} + +int ft2232_predict_scan_out(int scan_size, enum scan_type type) +{ + int predicted_size = 3; + + if (cur_state != TAP_SD) + predicted_size += 3; + + if (type == SCAN_IN) /* only from device to host */ + { + /* complete bytes */ + predicted_size += (CEIL(scan_size, 8) > 1) ? 3 : 0; + /* remaining bits - 1 (up to 7) */ + predicted_size += ((scan_size - 1) % 8) ? 2 : 0; + } + else /* host to device, or bidirectional */ + { + /* complete bytes */ + predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) + 3 - 1) : 0; + /* remaining bits -1 (up to 7) */ + predicted_size += ((scan_size - 1) % 8) ? 3 : 0; + } + + return predicted_size; +} + +int ft2232_predict_scan_in(int scan_size, enum scan_type type) +{ + int predicted_size = 0; + + if (type != SCAN_OUT) + { + /* complete bytes */ + predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) - 1) : 0; + /* remaining bits - 1 */ + predicted_size += ((scan_size - 1) % 8) ? 1 : 0; + /* last bit (from TMS scan) */ + predicted_size += 1; + } + + //DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); + + return predicted_size; +} + +void usbjtag_reset(int trst, int srst) +{ + if (trst == 1) + { + cur_state = TAP_TLR; + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + low_direction |= nTRSTnOE; /* switch to output pin (output is low) */ + else + low_output &= ~nTRST; /* switch output low */ + } + else if (trst == 0) + { + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + low_direction &= ~nTRSTnOE; /* switch to input pin (high-Z + internal and external pullup) */ + else + low_output |= nTRST; /* switch output high */ + } + + if (srst == 1) + { + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + low_output &= ~nSRST; /* switch output low */ + else + low_direction |= nSRSTnOE; /* switch to output pin (output is low) */ + } + else if (srst == 0) + { + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + low_output |= nSRST; /* switch output high */ + else + low_direction &= ~nSRSTnOE; /* switch to input pin (high-Z) */ + } + + /* command "set data bits low byte" */ + BUFFER_ADD = 0x80; + BUFFER_ADD = low_output; + BUFFER_ADD = low_direction; + +} + +void jtagkey_reset(int trst, int srst) +{ + if (trst == 1) + { + cur_state = TAP_TLR; + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + high_output &= ~nTRSTnOE; + else + high_output &= ~nTRST; + } + else if (trst == 0) + { + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + high_output |= nTRSTnOE; + else + high_output |= nTRST; + } + + if (srst == 1) + { + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + high_output &= ~nSRST; + else + high_output &= ~nSRSTnOE; + } + else if (srst == 0) + { + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + high_output |= nSRST; + else + high_output |= nSRSTnOE; + } + + /* command "set data bits high byte" */ + BUFFER_ADD = 0x82; + BUFFER_ADD = high_output; + BUFFER_ADD = high_direction; + DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); +} + +int ft2232_execute_queue() +{ + jtag_command_t *cmd = jtag_command_queue; /* currently processed command */ + jtag_command_t *first_unsent = cmd; /* next command that has to be sent */ + u8 *buffer; + int scan_size; /* size of IR or DR scan */ + enum scan_type type; + int i; + int predicted_size = 0; + int require_send = 0; + + ft2232_buffer_size = 0; + ft2232_expect_read = 0; + + while (cmd) + { + switch(cmd->type) + { + case JTAG_END_STATE: + if (cmd->cmd.end_state->end_state != -1) + ft2232_end_state(cmd->cmd.end_state->end_state); + break; + case JTAG_RESET: + /* only send the maximum buffer size that FT2232C can handle */ + predicted_size = 3; + if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + { + ft2232_send_and_recv(first_unsent, cmd); + require_send = 0; + first_unsent = cmd; + } + + layout->reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst); + require_send = 1; + +#ifdef _DEBUG_JTAG_IO_ + DEBUG("trst: %i, srst: %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst); +#endif + break; + case JTAG_RUNTEST: + /* only send the maximum buffer size that FT2232C can handle */ + predicted_size = 0; + if (cur_state != TAP_RTI) + predicted_size += 3; + predicted_size += 3 * CEIL(cmd->cmd.runtest->num_cycles, 7); + if ((cmd->cmd.runtest->end_state != -1) && (cmd->cmd.runtest->end_state != TAP_RTI)) + predicted_size += 3; + if ((cmd->cmd.runtest->end_state == -1) && (end_state != TAP_RTI)) + predicted_size += 3; + if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + { + ft2232_send_and_recv(first_unsent, cmd); + require_send = 0; + first_unsent = cmd; + } + if (cur_state != TAP_RTI) + { + /* command "Clock Data to TMS/CS Pin (no Read)" */ + BUFFER_ADD = 0x4b; + /* scan 7 bit */ + BUFFER_ADD = 0x6; + /* TMS data bits */ + BUFFER_ADD = TAP_MOVE(cur_state, TAP_RTI); + cur_state = TAP_RTI; + require_send = 1; + } + i = cmd->cmd.runtest->num_cycles; + while (i > 0) + { + /* command "Clock Data to TMS/CS Pin (no Read)" */ + BUFFER_ADD = 0x4b; + /* scan 7 bit */ + BUFFER_ADD = (i > 7) ? 6 : (i - 1); + /* TMS data bits */ + BUFFER_ADD = 0x0; + cur_state = TAP_RTI; + i -= (i > 7) ? 7 : i; + //DEBUG("added TMS scan (no read)"); + } + if (cmd->cmd.runtest->end_state != -1) + ft2232_end_state(cmd->cmd.runtest->end_state); + if (cur_state != end_state) + { + /* command "Clock Data to TMS/CS Pin (no Read)" */ + BUFFER_ADD = 0x4b; + /* scan 7 bit */ + BUFFER_ADD = 0x6; + /* TMS data bits */ + BUFFER_ADD = TAP_MOVE(cur_state, end_state); + cur_state = end_state; + //DEBUG("added TMS scan (no read)"); + } + require_send = 1; +#ifdef _DEBUG_JTAG_IO_ + DEBUG("runtest: %i, end in %i", cmd->cmd.runtest->num_cycles, end_state); +#endif + break; + case JTAG_STATEMOVE: + /* only send the maximum buffer size that FT2232C can handle */ + predicted_size = 3; + if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + { + ft2232_send_and_recv(first_unsent, cmd); + require_send = 0; + first_unsent = cmd; + } + if (cmd->cmd.statemove->end_state != -1) + ft2232_end_state(cmd->cmd.statemove->end_state); + /* command "Clock Data to TMS/CS Pin (no Read)" */ + BUFFER_ADD = 0x4b; + /* scan 7 bit */ + BUFFER_ADD = 0x6; + /* TMS data bits */ + BUFFER_ADD = TAP_MOVE(cur_state, end_state); + //DEBUG("added TMS scan (no read)"); + cur_state = end_state; + require_send = 1; +#ifdef _DEBUG_JTAG_IO_ + DEBUG("statemove: %i", end_state); +#endif + break; + case JTAG_PATHMOVE: + /* only send the maximum buffer size that FT2232C can handle */ + predicted_size = 3 * CEIL(cmd->cmd.pathmove->num_states, 7); + if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + { + ft2232_send_and_recv(first_unsent, cmd); + require_send = 0; + first_unsent = cmd; + } + ft2232_add_pathmove(cmd->cmd.pathmove); + require_send = 1; +#ifdef _DEBUG_JTAG_IO_ + DEBUG("pathmove: %i states, end in %i", cmd->cmd.pathmove->num_states, cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]); +#endif + break; + case JTAG_SCAN: + scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer); + type = jtag_scan_type(cmd->cmd.scan); + predicted_size = ft2232_predict_scan_out(scan_size, type); + if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + { + DEBUG("ftd2xx buffer size reached, sending queued commands (first_unsent: %x, cmd: %x)", first_unsent, cmd); + ft2232_send_and_recv(first_unsent, cmd); + require_send = 0; + first_unsent = cmd; + } + ft2232_expect_read += ft2232_predict_scan_in(scan_size, type); + //DEBUG("new read size: %i", ft2232_expect_read); + if (cmd->cmd.scan->end_state != -1) + ft2232_end_state(cmd->cmd.scan->end_state); + ft2232_add_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size); + require_send = 1; + if (buffer) + free(buffer); +#ifdef _DEBUG_JTAG_IO_ + DEBUG("%s scan, %i bit, end in %i", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size, end_state); +#endif + break; + case JTAG_SLEEP: + ft2232_send_and_recv(first_unsent, cmd); + first_unsent = cmd->next; + jtag_sleep(cmd->cmd.sleep->us); +#ifdef _DEBUG_JTAG_IO_ + DEBUG("sleep %i usec", cmd->cmd.sleep->us); +#endif + break; + default: + ERROR("BUG: unknown JTAG command type encountered"); + exit(-1); + } + cmd = cmd->next; + } + + if (require_send > 0) + ft2232_send_and_recv(first_unsent, cmd); + + return ERROR_OK; +} + +int ft2232_init(void) +{ + u8 latency_timer; + u8 buf[1]; + int retval; + u32 bytes_written; + +#if BUILD_FT2232_FTD2XX == 1 + FT_STATUS status; +#endif + + ft2232_layout_t *cur_layout = ft2232_layouts; + + if ((ft2232_layout == NULL) || (ft2232_layout[0] == 0)) + { + ft2232_layout = "usbjtag"; + WARNING("No ft2232 layout specified, using default 'usbjtag'"); + } + + while (cur_layout->name) + { + if (strcmp(cur_layout->name, ft2232_layout) == 0) + { + layout = cur_layout; + break; + } + cur_layout++; + } + + if (!layout) + { + ERROR("No matching layout found for %s", ft2232_layout); + return ERROR_JTAG_INIT_FAILED; + } + +#if BUILD_FT2232_FTD2XX == 1 + DEBUG("'ft2232' interface using FTD2XX with '%s' layout", ft2232_layout); +#elif BUILD_FT2232_LIBFTDI == 1 + DEBUG("'ft2232' interface using libftdi with '%s' layout", ft2232_layout); +#endif + + if (ft2232_device_desc == NULL) + { + WARNING("no ftd2xx device description specified, using default 'Dual RS232'"); + ft2232_device_desc = "Dual RS232"; + } + +#if BUILD_FT2232_FTD2XX == 1 + +#if IS_WIN32 == 0 + /* Add non-standard Vid/Pid to the linux driver */ + if ((status = FT_SetVIDPID(ft2232_vid, ft2232_pid)) != FT_OK) + { + WARNING("couldn't add %4.4x:%4.4x", ft2232_vid, ft2232_pid); + } +#endif + + if ((status = FT_OpenEx(ft2232_device_desc, FT_OPEN_BY_DESCRIPTION, &ftdih)) != FT_OK) + { + DWORD num_devices; + + ERROR("unable to open ftdi device: %i", status); + status = FT_ListDevices(&num_devices, NULL, FT_LIST_NUMBER_ONLY); + if (status == FT_OK) + { + char **desc_array = malloc(sizeof(char*) * (num_devices + 1)); + int i; + + for (i = 0; i < num_devices; i++) + desc_array[i] = malloc(64); + desc_array[num_devices] = NULL; + + status = FT_ListDevices(desc_array, &num_devices, FT_LIST_ALL | FT_OPEN_BY_DESCRIPTION); + + if (status == FT_OK) + { + ERROR("ListDevices: %d\n", num_devices); + for (i = 0; i < num_devices; i++) + ERROR("%i: %s", i, desc_array[i]); + } + + for (i = 0; i < num_devices; i++) + free(desc_array[i]); + free(desc_array); + } + else + { + printf("ListDevices: NONE\n"); + } + return ERROR_JTAG_INIT_FAILED; + } + + if ((status = FT_SetLatencyTimer(ftdih, 2)) != FT_OK) + { + ERROR("unable to set latency timer: %i", status); + return ERROR_JTAG_INIT_FAILED; + } + + if ((status = FT_GetLatencyTimer(ftdih, &latency_timer)) != FT_OK) + { + ERROR("unable to get latency timer: %i", status); + return ERROR_JTAG_INIT_FAILED; + } + else + { + DEBUG("current latency timer: %i", latency_timer); + } + + if ((status = FT_SetBitMode(ftdih, 0x0b, 2)) != FT_OK) + { + ERROR("unable to enable bit i/o mode: %i", status); + return ERROR_JTAG_INIT_FAILED; + } +#elif BUILD_FT2232_LIBFTDI == 1 + if (ftdi_init(&ftdic) < 0) + return ERROR_JTAG_INIT_FAILED; + + /* context, vendor id, product id */ + if (ftdi_usb_open(&ftdic, ft2232_vid, ft2232_pid) < 0) + { + ERROR("unable to open ftdi device: %s", ftdic.error_str); + return ERROR_JTAG_INIT_FAILED; + } + + if (ftdi_usb_reset(&ftdic) < 0) + { + ERROR("unable to reset ftdi device"); + return ERROR_JTAG_INIT_FAILED; + } + + if (ftdi_set_latency_timer(&ftdic, 2) < 0) + { + ERROR("unable to set latency timer"); + return ERROR_JTAG_INIT_FAILED; + } + + if (ftdi_get_latency_timer(&ftdic, &latency_timer) < 0) + { + ERROR("unable to get latency timer"); + return ERROR_JTAG_INIT_FAILED; + } + else + { + DEBUG("current latency timer: %i", latency_timer); + } + + ftdic.bitbang_mode = 0; /* Reset controller */ + ftdi_enable_bitbang(&ftdic, 0x0b); /* ctx, JTAG I/O mask */ + + ftdic.bitbang_mode = 2; /* MPSSE mode */ + ftdi_enable_bitbang(&ftdic, 0x0b); /* ctx, JTAG I/O mask */ +#endif + + ft2232_buffer_size = 0; + ft2232_buffer = malloc(FT2232_BUFFER_SIZE); + + if (layout->init() != ERROR_OK) + return ERROR_JTAG_INIT_FAILED; + + ft2232_speed(jtag_speed); + + buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */ + if (((retval = ft2232_write(buf, 1, &bytes_written)) != ERROR_OK) || (bytes_written != 1)) + { + ERROR("couldn't write to FT2232 to disable loopback"); + return ERROR_JTAG_INIT_FAILED; + } + +#if BUILD_FT2232_FTD2XX == 1 + if ((status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK) + { + ERROR("error purging ftd2xx device: %i", status); + return ERROR_JTAG_INIT_FAILED; + } +#elif BUILD_FT2232_LIBFTDI == 1 + if (ftdi_usb_purge_buffers(&ftdic) < 0) + { + ERROR("ftdi_purge_buffers: %s", ftdic.error_str); + return ERROR_JTAG_INIT_FAILED; + } +#endif + + return ERROR_OK; +} + +int usbjtag_init(void) +{ + u8 buf[3]; + u32 bytes_written; + + low_output = 0x08; + low_direction = 0x0b; + + nTRST = 0x10; + nTRSTnOE = 0x10; + nSRST = 0x40; + nSRSTnOE = 0x40; + + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + { + low_direction &= ~nTRSTnOE; /* nTRST input */ + low_output &= ~nTRST; /* nTRST = 0 */ + } + else + { + low_direction |= nTRSTnOE; /* nTRST output */ + low_output |= nTRST; /* nTRST = 1 */ + } + + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + { + low_direction |= nSRSTnOE; /* nSRST output */ + low_output |= nSRST; /* nSRST = 1 */ + } + else + { + low_direction &= ~nSRSTnOE; /* nSRST input */ + low_output &= ~nSRST; /* nSRST = 0 */ + } + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, xRST high) */ + buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */ + DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + ERROR("couldn't initialize FT2232 with 'USBJTAG' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + +int jtagkey_init(void) +{ + u8 buf[3]; + u32 bytes_written; + + low_output = 0x08; + low_direction = 0x1b; + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ + DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + if (strcmp(layout->name, "jtagkey") == 0) + { + nTRST = 0x01; + nTRSTnOE = 0x4; + nSRST = 0x02; + nSRSTnOE = 0x08; + } + else if (strcmp(layout->name, "jtagkey_prototype_v1") == 0) + { + nTRST = 0x02; + nTRSTnOE = 0x1; + nSRST = 0x08; + nSRSTnOE = 0x04; + } + else + { + ERROR("BUG: jtagkey_init called for non jtagkey layout"); + exit(-1); + } + + high_output = 0x0; + high_direction = 0x0f; + + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + { + high_output |= nTRSTnOE; + high_output &= ~nTRST; + } + else + { + high_output &= ~nTRSTnOE; + high_output |= nTRST; + } + + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + { + high_output &= ~nSRSTnOE; + high_output |= nSRST; + } + else + { + high_output |= nSRSTnOE; + high_output &= ~nSRST; + } + + /* initialize high port */ + buf[0] = 0x82; /* command "set data bits low byte" */ + buf[1] = high_output; /* value */ + buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ + DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + +int ft2232_quit(void) +{ +#if BUILD_FT2232_FTD2XX == 1 + FT_STATUS status; + + status = FT_Close(ftdih); +#elif BUILD_FT2232_LIBFTDI == 1 + ftdi_disable_bitbang(&ftdic); + + ftdi_usb_close(&ftdic); + + ftdi_deinit(&ftdic); +#endif + + free(ft2232_buffer); + + return ERROR_OK; +} + +int ft2232_handle_device_desc_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) +{ + if (argc == 1) + { + ft2232_device_desc = strdup(args[0]); + } + else + { + ERROR("expected exactly one argument to ft2232_device_desc "); + } + + return ERROR_OK; +} + +int ft2232_handle_layout_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) +{ + if (argc == 0) + return ERROR_OK; + + ft2232_layout = malloc(strlen(args[0]) + 1); + strcpy(ft2232_layout, args[0]); + + return ERROR_OK; +} + +int ft2232_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) +{ + if (argc >= 2) + { + ft2232_vid = strtol(args[0], NULL, 0); + ft2232_pid = strtol(args[1], NULL, 0); + } + else + { + WARNING("incomplete ft2232_vid_pid configuration directive"); + } + + return ERROR_OK; +} diff --git a/src/jtag/ftd2xx.c b/src/jtag/ftd2xx.c deleted file mode 100644 index 050f9c04..00000000 --- a/src/jtag/ftd2xx.c +++ /dev/null @@ -1,1103 +0,0 @@ -/*************************************************************************** - * Copyright (C) 2004 by Dominic Rath * - * Dominic.Rath@gmx.de * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - ***************************************************************************/ -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#if IS_CYGWIN == 1 -#include "windows.h" -#undef ERROR -#endif - -#include "replacements.h" - -/* project specific includes */ -#include "log.h" -#include "types.h" -#include "jtag.h" -#include "configuration.h" -#include "time_support.h" - -/* system includes */ -#include -#include -#include -#include - -#include -#include - -/* enable this to debug io latency - */ -#if 0 -#define _DEBUG_USB_IO_ -#endif - -/* enable this to debug communication - */ -#if 0 -#define _DEBUG_USB_COMMS_ -#endif - -/* enable this to work around ftd2xx deadlock - */ -#if 0 -#define _FTD2XX_QUEUE_DELAY_ -#endif - -int ftd2xx_execute_queue(void); - -int ftd2xx_speed(int speed); -int ftd2xx_register_commands(struct command_context_s *cmd_ctx); -int ftd2xx_init(void); -int ftd2xx_quit(void); - -int ftd2xx_handle_device_desc_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); -int ftd2xx_handle_layout_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); -int ftd2xx_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); - -char *ftd2xx_device_desc = NULL; -char *ftd2xx_layout = NULL; -u16 ftd2xx_vid = 0x0403; -u16 ftd2xx_pid = 0x6010; - -typedef struct ftd2xx_layout_s -{ - char* name; - int(*init)(void); - void(*reset)(int trst, int srst); -} ftd2xx_layout_t; - -int usbjtag_init(void); -int jtagkey_init(void); -void usbjtag_reset(int trst, int srst); -void jtagkey_reset(int trst, int srst); - -ftd2xx_layout_t ftd2xx_layouts[] = -{ - {"usbjtag", usbjtag_init, usbjtag_reset}, - {"jtagkey", jtagkey_init, jtagkey_reset}, - {"jtagkey_prototype_v1", jtagkey_init, jtagkey_reset}, - {NULL, NULL, NULL}, -}; - -static u8 nTRST, nTRSTnOE, nSRST, nSRSTnOE; - -static ftd2xx_layout_t *layout; -static u8 low_output = 0x0; -static u8 low_direction = 0x0; -static u8 high_output = 0x0; -static u8 high_direction = 0x0; -static FT_HANDLE ftdih = NULL; - -static u8 *ftd2xx_buffer = NULL; -static int ftd2xx_buffer_size = 0; -static int ftd2xx_read_pointer = 0; -static int ftd2xx_expect_read = 0; -#define FTD2XX_BUFFER_SIZE 131072 -#define BUFFER_ADD ftd2xx_buffer[ftd2xx_buffer_size++] -#define BUFFER_READ ftd2xx_buffer[ftd2xx_read_pointer++] - -jtag_interface_t ftd2xx_interface = -{ - - .name = "ftd2xx", - - .execute_queue = ftd2xx_execute_queue, - - .support_statemove = 1, - - .speed = ftd2xx_speed, - .register_commands = ftd2xx_register_commands, - .init = ftd2xx_init, - .quit = ftd2xx_quit, -}; - -int ftd2xx_speed(int speed) -{ - u8 buf[3]; - FT_STATUS status; - DWORD bytes_written; - - buf[0] = 0x86; /* command "set divisor" */ - buf[1] = speed & 0xff; /* valueL (0=6MHz, 1=3MHz, 2=1.5MHz, ...*/ - buf[2] = (speed >> 8) & 0xff; /* valueH */ - - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((status = FT_Write(ftdih, buf, 3, &bytes_written)) != FT_OK) || (bytes_written != 3)) - { - ERROR("couldn't write to ftdi device: %i", status); - return status; - } - - return ERROR_OK; -} - -int ftd2xx_register_commands(struct command_context_s *cmd_ctx) -{ - register_command(cmd_ctx, NULL, "ftd2xx_device_desc", ftd2xx_handle_device_desc_command, - COMMAND_CONFIG, NULL); - register_command(cmd_ctx, NULL, "ftd2xx_layout", ftd2xx_handle_layout_command, - COMMAND_CONFIG, NULL); - register_command(cmd_ctx, NULL, "ftd2xx_vid_pid", ftd2xx_handle_vid_pid_command, - COMMAND_CONFIG, NULL); - return ERROR_OK; -} - -void ftd2xx_end_state(state) -{ - if (tap_move_map[state] != -1) - end_state = state; - else - { - ERROR("BUG: %i is not a valid end state", state); - exit(-1); - } -} - -void ftd2xx_read_scan(enum scan_type type, u8* buffer, int scan_size) -{ - int num_bytes = ((scan_size + 7) / 8); - int bits_left = scan_size; - int cur_byte = 0; - - while(num_bytes-- > 1) - { - buffer[cur_byte] = BUFFER_READ; - cur_byte++; - bits_left -= 8; - } - - buffer[cur_byte] = 0x0; - - if (bits_left > 1) - { - buffer[cur_byte] = BUFFER_READ >> 1; - } - - buffer[cur_byte] = (buffer[cur_byte] | ((BUFFER_READ & 0x02) << 6)) >> (8 - bits_left); - -} - -void ftd2xx_debug_dump_buffer(void) -{ - int i; - char line[256]; - char *line_p = line; - - for (i = 0; i < ftd2xx_buffer_size; i++) - { - line_p += snprintf(line_p, 256 - (line_p - line), "%2.2x ", ftd2xx_buffer[i]); - if (i % 16 == 15) - { - DEBUG("%s", line); - line_p = line; - } - } - - if (line_p != line) - DEBUG("%s", line); -} - -int ftd2xx_send_and_recv(jtag_command_t *first, jtag_command_t *last) -{ - jtag_command_t *cmd; - u8 *buffer; - int scan_size; - enum scan_type type; - FT_STATUS status; - DWORD bytes_written; - DWORD bytes_read; - -#ifdef _DEBUG_USB_IO_ - struct timeval start, inter, inter2, end; - struct timeval d_inter, d_inter2, d_end; -#endif - -#ifdef _DEBUG_USB_COMMS_ - DEBUG("write buffer (size %i):", ftd2xx_buffer_size); - ftd2xx_debug_dump_buffer(); -#endif - -#ifdef _DEBUG_USB_IO_ - gettimeofday(&start, NULL); -#endif - - if ((status = FT_Write(ftdih, ftd2xx_buffer, ftd2xx_buffer_size, &bytes_written)) != FT_OK) - { - ERROR("couldn't write to ftdi device: %i", status); - exit(-1); - } - -#ifdef _DEBUG_USB_IO_ - gettimeofday(&inter, NULL); -#endif - - if (ftd2xx_expect_read) - { - int timeout = 100; - ftd2xx_buffer_size = 0; - -#ifdef _FTD2XX_QUEUE_DELAY_ - DWORD inrxqueue = 0; - while (inrxqueue < ftd2xx_expect_read) - { - FT_GetQueueStatus(ftdih, &inrxqueue); - if (inrxqueue >= ftd2xx_expect_read) - break; - usleep(1000); - }; -#endif - -#ifdef _DEBUG_USB_IO_ - gettimeofday(&inter2, NULL); -#endif - - if ((status = FT_Read(ftdih, ftd2xx_buffer, ftd2xx_expect_read, &bytes_read)) != FT_OK) - { - ERROR("couldn't read from ftdi device: %i", status); - exit(-1); - } - -#ifdef _DEBUG_USB_IO_ - gettimeofday(&end, NULL); - - timeval_subtract(&d_inter, &inter, &start); - timeval_subtract(&d_inter2, &inter2, &start); - timeval_subtract(&d_end, &end, &start); - - INFO("inter: %i.%i, inter2: %i.%i end: %i.%i", d_inter.tv_sec, d_inter.tv_usec, d_inter2.tv_sec, d_inter2.tv_usec, d_end.tv_sec, d_end.tv_usec); -#endif - - - ftd2xx_buffer_size = bytes_read; - - if (ftd2xx_expect_read != ftd2xx_buffer_size) - { - ERROR("ftd2xx_expect_read (%i) != ftd2xx_buffer_size (%i) (%i retries)", ftd2xx_expect_read, ftd2xx_buffer_size, 100 - timeout); - ftd2xx_debug_dump_buffer(); - - exit(-1); - } - -#ifdef _DEBUG_USB_COMMS_ - DEBUG("read buffer (%i retries): %i bytes", 100 - timeout, ftd2xx_buffer_size); - ftd2xx_debug_dump_buffer(); -#endif - } - - ftd2xx_expect_read = 0; - ftd2xx_read_pointer = 0; - - cmd = first; - while (cmd != last) - { - switch (cmd->type) - { - case JTAG_SCAN: - type = jtag_scan_type(cmd->cmd.scan); - if (type != SCAN_OUT) - { - scan_size = jtag_scan_size(cmd->cmd.scan); - buffer = calloc(CEIL(scan_size, 8), 1); - ftd2xx_read_scan(type, buffer, scan_size); - jtag_read_buffer(buffer, cmd->cmd.scan); - free(buffer); - } - break; - default: - break; - } - cmd = cmd->next; - } - - ftd2xx_buffer_size = 0; - - return ERROR_OK; -} - -void ftd2xx_add_pathmove(pathmove_command_t *cmd) -{ - int num_states = cmd->num_states; - u8 tms_byte; - int state_count; - - state_count = 0; - while (num_states) - { - tms_byte = 0x0; - int bit_count = 0; - - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* number of states remaining */ - BUFFER_ADD = (num_states % 7) - 1; - - while (num_states % 7) - { - if (tap_transitions[cur_state].low == cmd->path[state_count]) - buf_set_u32(&tms_byte, bit_count++, 1, 0x0); - else if (tap_transitions[cur_state].high == cmd->path[state_count]) - buf_set_u32(&tms_byte, bit_count++, 1, 0x1); - else - { - ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_strings[cur_state], tap_state_strings[cmd->path[state_count]]); - exit(-1); - } - - cur_state = cmd->path[state_count]; - state_count++; - num_states--; - } - - BUFFER_ADD = tms_byte; - } - - end_state = cur_state; -} - -void ftd2xx_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size) -{ - int num_bytes = (scan_size + 7) / 8; - int bits_left = scan_size; - int cur_byte = 0; - int last_bit; - - if ((!ir_scan && (cur_state != TAP_SD)) || (ir_scan && (cur_state != TAP_SI))) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - if (ir_scan) - { - BUFFER_ADD = TAP_MOVE(cur_state, TAP_SI); - cur_state = TAP_SI; - } - else - { - BUFFER_ADD = TAP_MOVE(cur_state, TAP_SD); - cur_state = TAP_SD; - } - //DEBUG("added TMS scan (no read)"); - } - - /* add command for complete bytes */ - if (num_bytes > 1) - { - if (type == SCAN_IO) - { - /* Clock Data Bytes In and Out LSB First */ - BUFFER_ADD = 0x39; - //DEBUG("added TDI bytes (io %i)", num_bytes); - } - else if (type == SCAN_OUT) - { - /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x19; - //DEBUG("added TDI bytes (o)"); - } - else if (type == SCAN_IN) - { - /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x28; - //DEBUG("added TDI bytes (i %i)", num_bytes); - } - BUFFER_ADD = (num_bytes-2) & 0xff; - BUFFER_ADD = ((num_bytes-2) >> 8) & 0xff; - } - if (type != SCAN_IN) - { - /* add complete bytes */ - while(num_bytes-- > 1) - { - BUFFER_ADD = buffer[cur_byte]; - cur_byte++; - bits_left -= 8; - } - } - if (type == SCAN_IN) - { - bits_left -= 8 * (num_bytes - 1); - } - - /* the most signifcant bit is scanned during TAP movement */ - if (type != SCAN_IN) - last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1; - else - last_bit = 0; - - /* process remaining bits but the last one */ - if (bits_left > 1) - { - if (type == SCAN_IO) - { - /* Clock Data Bits In and Out LSB First */ - BUFFER_ADD = 0x3b; - //DEBUG("added TDI bits (io) %i", bits_left - 1); - } - else if (type == SCAN_OUT) - { - /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x1b; - //DEBUG("added TDI bits (o)"); - } - else if (type == SCAN_IN) - { - /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x2a; - //DEBUG("added TDI bits (i %i)", bits_left - 1); - } - BUFFER_ADD = bits_left - 2; - if (type != SCAN_IN) - BUFFER_ADD = buffer[cur_byte]; - } - - /* move from Shift-IR/DR to end state */ - if (type != SCAN_OUT) - { - /* Clock Data to TMS/CS Pin with Read */ - BUFFER_ADD = 0x6b; - //DEBUG("added TMS scan (read)"); - } - else - { - /* Clock Data to TMS/CS Pin (no Read) */ - BUFFER_ADD = 0x4b; - //DEBUG("added TMS scan (no read)"); - } - BUFFER_ADD = 0x6; - BUFFER_ADD = TAP_MOVE(cur_state, end_state) | (last_bit << 7); - cur_state = end_state; - -} - -int ftd2xx_predict_scan_out(int scan_size, enum scan_type type) -{ - int predicted_size = 3; - - if (cur_state != TAP_SD) - predicted_size += 3; - - if (type == SCAN_IN) /* only from device to host */ - { - /* complete bytes */ - predicted_size += (CEIL(scan_size, 8) > 1) ? 3 : 0; - /* remaining bits - 1 (up to 7) */ - predicted_size += ((scan_size - 1) % 8) ? 2 : 0; - } - else /* host to device, or bidirectional */ - { - /* complete bytes */ - predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) + 3 - 1) : 0; - /* remaining bits -1 (up to 7) */ - predicted_size += ((scan_size - 1) % 8) ? 3 : 0; - } - - return predicted_size; -} - -int ftd2xx_predict_scan_in(int scan_size, enum scan_type type) -{ - int predicted_size = 0; - - if (type != SCAN_OUT) - { - /* complete bytes */ - predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) - 1) : 0; - /* remaining bits - 1 */ - predicted_size += ((scan_size - 1) % 8) ? 1 : 0; - /* last bit (from TMS scan) */ - predicted_size += 1; - } - - //DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); - - return predicted_size; -} - -void usbjtag_reset(int trst, int srst) -{ - if (trst == 1) - { - cur_state = TAP_TLR; - if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) - low_direction |= nTRSTnOE; /* switch to output pin (output is low) */ - else - low_output &= ~nTRST; /* switch output low */ - } - else if (trst == 0) - { - if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) - low_direction &= ~nTRSTnOE; /* switch to input pin (high-Z + internal and external pullup) */ - else - low_output |= nTRST; /* switch output high */ - } - - if (srst == 1) - { - if (jtag_reset_config & RESET_SRST_PUSH_PULL) - low_output &= ~nSRST; /* switch output low */ - else - low_direction |= nSRSTnOE; /* switch to output pin (output is low) */ - } - else if (srst == 0) - { - if (jtag_reset_config & RESET_SRST_PUSH_PULL) - low_output |= nSRST; /* switch output high */ - else - low_direction &= ~nSRSTnOE; /* switch to input pin (high-Z) */ - } - - /* command "set data bits low byte" */ - BUFFER_ADD = 0x80; - BUFFER_ADD = low_output; - BUFFER_ADD = low_direction; - -} - -void jtagkey_reset(int trst, int srst) -{ - if (trst == 1) - { - cur_state = TAP_TLR; - if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) - high_output &= ~nTRSTnOE; - else - high_output &= ~nTRST; - } - else if (trst == 0) - { - if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) - high_output |= nTRSTnOE; - else - high_output |= nTRST; - } - - if (srst == 1) - { - if (jtag_reset_config & RESET_SRST_PUSH_PULL) - high_output &= ~nSRST; - else - high_output &= ~nSRSTnOE; - } - else if (srst == 0) - { - if (jtag_reset_config & RESET_SRST_PUSH_PULL) - high_output |= nSRST; - else - high_output |= nSRSTnOE; - } - - /* command "set data bits high byte" */ - BUFFER_ADD = 0x82; - BUFFER_ADD = high_output; - BUFFER_ADD = high_direction; - DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); -} - -int ftd2xx_execute_queue() -{ - jtag_command_t *cmd = jtag_command_queue; /* currently processed command */ - jtag_command_t *first_unsent = cmd; /* next command that has to be sent */ - u8 *buffer; - int scan_size; /* size of IR or DR scan */ - enum scan_type type; - int i; - int predicted_size = 0; - int require_send = 0; - - ftd2xx_buffer_size = 0; - ftd2xx_expect_read = 0; - - while (cmd) - { - switch(cmd->type) - { - case JTAG_END_STATE: - if (cmd->cmd.end_state->end_state != -1) - ftd2xx_end_state(cmd->cmd.end_state->end_state); - break; - case JTAG_RESET: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 3; - if (ftd2xx_buffer_size + predicted_size + 1 > FTD2XX_BUFFER_SIZE) - { - ftd2xx_send_and_recv(first_unsent, cmd); - require_send = 0; - first_unsent = cmd; - } - - layout->reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst); - require_send = 1; - -#ifdef _DEBUG_JTAG_IO_ - DEBUG("trst: %i, srst: %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst); -#endif - break; - case JTAG_RUNTEST: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 0; - if (cur_state != TAP_RTI) - predicted_size += 3; - predicted_size += 3 * CEIL(cmd->cmd.runtest->num_cycles, 7); - if ((cmd->cmd.runtest->end_state != -1) && (cmd->cmd.runtest->end_state != TAP_RTI)) - predicted_size += 3; - if ((cmd->cmd.runtest->end_state == -1) && (end_state != TAP_RTI)) - predicted_size += 3; - if (ftd2xx_buffer_size + predicted_size + 1 > FTD2XX_BUFFER_SIZE) - { - ftd2xx_send_and_recv(first_unsent, cmd); - require_send = 0; - first_unsent = cmd; - } - if (cur_state != TAP_RTI) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, TAP_RTI); - cur_state = TAP_RTI; - require_send = 1; - } - i = cmd->cmd.runtest->num_cycles; - while (i > 0) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = (i > 7) ? 6 : (i - 1); - /* TMS data bits */ - BUFFER_ADD = 0x0; - cur_state = TAP_RTI; - i -= (i > 7) ? 7 : i; - //DEBUG("added TMS scan (no read)"); - } - if (cmd->cmd.runtest->end_state != -1) - ftd2xx_end_state(cmd->cmd.runtest->end_state); - if (cur_state != end_state) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, end_state); - cur_state = end_state; - //DEBUG("added TMS scan (no read)"); - } - require_send = 1; -#ifdef _DEBUG_JTAG_IO_ - DEBUG("runtest: %i, end in %i", cmd->cmd.runtest->num_cycles, end_state); -#endif - break; - case JTAG_STATEMOVE: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 3; - if (ftd2xx_buffer_size + predicted_size + 1 > FTD2XX_BUFFER_SIZE) - { - ftd2xx_send_and_recv(first_unsent, cmd); - require_send = 0; - first_unsent = cmd; - } - if (cmd->cmd.statemove->end_state != -1) - ftd2xx_end_state(cmd->cmd.statemove->end_state); - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, end_state); - //DEBUG("added TMS scan (no read)"); - cur_state = end_state; - require_send = 1; -#ifdef _DEBUG_JTAG_IO_ - DEBUG("statemove: %i", end_state); -#endif - break; - case JTAG_PATHMOVE: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 3 * CEIL(cmd->cmd.pathmove->num_states, 7); - if (ftd2xx_buffer_size + predicted_size + 1 > FTD2XX_BUFFER_SIZE) - { - ftd2xx_send_and_recv(first_unsent, cmd); - require_send = 0; - first_unsent = cmd; - } - ftd2xx_add_pathmove(cmd->cmd.pathmove); - require_send = 1; -#ifdef _DEBUG_JTAG_IO_ - DEBUG("pathmove: %i states, end in %i", cmd->cmd.pathmove->num_states, cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]); -#endif - break; - case JTAG_SCAN: - scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer); - type = jtag_scan_type(cmd->cmd.scan); - predicted_size = ftd2xx_predict_scan_out(scan_size, type); - if (ftd2xx_buffer_size + predicted_size + 1 > FTD2XX_BUFFER_SIZE) - { - DEBUG("ftd2xx buffer size reached, sending queued commands (first_unsent: %x, cmd: %x)", first_unsent, cmd); - ftd2xx_send_and_recv(first_unsent, cmd); - require_send = 0; - first_unsent = cmd; - } - ftd2xx_expect_read += ftd2xx_predict_scan_in(scan_size, type); - //DEBUG("new read size: %i", ftd2xx_expect_read); - if (cmd->cmd.scan->end_state != -1) - ftd2xx_end_state(cmd->cmd.scan->end_state); - ftd2xx_add_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size); - require_send = 1; - if (buffer) - free(buffer); -#ifdef _DEBUG_JTAG_IO_ - DEBUG("%s scan, %i bit, end in %i", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size, end_state); -#endif - break; - case JTAG_SLEEP: - ftd2xx_send_and_recv(first_unsent, cmd); - first_unsent = cmd->next; - jtag_sleep(cmd->cmd.sleep->us); -#ifdef _DEBUG_JTAG_IO_ - DEBUG("sleep %i usec", cmd->cmd.sleep->us); -#endif - break; - default: - ERROR("BUG: unknown JTAG command type encountered"); - exit(-1); - } - cmd = cmd->next; - } - - if (require_send > 0) - ftd2xx_send_and_recv(first_unsent, cmd); - - return ERROR_OK; -} - -int ftd2xx_init(void) -{ - u8 latency_timer; - FT_STATUS status; - DWORD num_devices; - u8 buf[1]; - DWORD bytes_written; - - ftd2xx_layout_t *cur_layout = ftd2xx_layouts; - - if ((ftd2xx_layout == NULL) || (ftd2xx_layout[0] == 0)) - { - ftd2xx_layout = "usbjtag"; - WARNING("No ftd2xx layout specified, using default 'usbjtag'"); - } - - while (cur_layout->name) - { - if (strcmp(cur_layout->name, ftd2xx_layout) == 0) - { - layout = cur_layout; - break; - } - cur_layout++; - } - - if (!layout) - { - ERROR("No matching layout found for %s", ftd2xx_layout); - return ERROR_JTAG_INIT_FAILED; - } - - if (ftd2xx_device_desc == NULL) - { - WARNING("no ftd2xx device description specified, using default 'Dual RS232'"); - ftd2xx_device_desc = "Dual RS232"; - } - -#if IS_WIN32 == 0 - /* Add JTAGkey Vid/Pid to the linux driver */ - if ((status = FT_SetVIDPID(ftd2xx_vid, ftd2xx_pid)) != FT_OK) - { - WARNING("couldn't add %4.4x:%4.4x", ftd2xx_vid, ftd2xx_pid); - } -#endif - - if ((status = FT_OpenEx(ftd2xx_device_desc, FT_OPEN_BY_DESCRIPTION, &ftdih)) != FT_OK) - { - ERROR("unable to open ftdi device: %i", status); - status = FT_ListDevices(&num_devices, NULL, FT_LIST_NUMBER_ONLY); - if (status == FT_OK) - { - char **desc_array = malloc(sizeof(char*) * (num_devices + 1)); - int i; - - for (i = 0; i < num_devices; i++) - desc_array[i] = malloc(64); - desc_array[num_devices] = NULL; - - status = FT_ListDevices(desc_array, &num_devices, FT_LIST_ALL | FT_OPEN_BY_DESCRIPTION); - - if (status == FT_OK) - { - ERROR("ListDevices: %d\n", num_devices); - for (i = 0; i < num_devices; i++) - ERROR("%i: %s", i, desc_array[i]); - } - - for (i = 0; i < num_devices; i++) - free(desc_array[i]); - free(desc_array); - } - else - { - printf("ListDevices: NONE\n"); - } - return ERROR_JTAG_INIT_FAILED; - } - - if ((status = FT_SetLatencyTimer(ftdih, 2)) != FT_OK) - { - ERROR("unable to set latency timer: %i", status); - return ERROR_JTAG_INIT_FAILED; - } - - if ((status = FT_GetLatencyTimer(ftdih, &latency_timer)) != FT_OK) - { - ERROR("unable to get latency timer: %i", status); - return ERROR_JTAG_INIT_FAILED; - } - else - { - DEBUG("current latency timer: %i", latency_timer); - } - - if ((status = FT_SetBitMode(ftdih, 0x0b, 2)) != FT_OK) - { - ERROR("unable to enable bit i/o mode: %i", status); - return ERROR_JTAG_INIT_FAILED; - } - - ftd2xx_buffer_size = 0; - ftd2xx_buffer = malloc(FTD2XX_BUFFER_SIZE); - - if (layout->init() != ERROR_OK) - return ERROR_JTAG_INIT_FAILED; - - ftd2xx_speed(jtag_speed); - - buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */ - if (((status = FT_Write(ftdih, buf, 1, &bytes_written)) != FT_OK) || (bytes_written != 1)) - { - ERROR("couldn't write to ftdi device: %i", status); - return ERROR_JTAG_INIT_FAILED; - } - - if ((status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK) - { - ERROR("error purging ftd2xx device: %i", status); - return ERROR_JTAG_INIT_FAILED; - } - - return ERROR_OK; -} - -int usbjtag_init(void) -{ - u8 buf[3]; - FT_STATUS status; - DWORD bytes_written; - - low_output = 0x08; - low_direction = 0x0b; - - nTRST = 0x10; - nTRSTnOE = 0x10; - nSRST = 0x40; - nSRSTnOE = 0x40; - - if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) - { - low_direction &= ~nTRSTnOE; /* nTRST input */ - low_output &= ~nTRST; /* nTRST = 0 */ - } - else - { - low_direction |= nTRSTnOE; /* nTRST output */ - low_output |= nTRST; /* nTRST = 1 */ - } - - if (jtag_reset_config & RESET_SRST_PUSH_PULL) - { - low_direction |= nSRSTnOE; /* nSRST output */ - low_output |= nSRST; /* nSRST = 1 */ - } - else - { - low_direction &= ~nSRSTnOE; /* nSRST input */ - low_output &= ~nSRST; /* nSRST = 0 */ - } - - /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, xRST high) */ - buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */ - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - - if (((FT_Write(ftdih, buf, 3, &bytes_written)) != FT_OK) || (bytes_written != 3)) - { - ERROR("couldn't write to ftdi device: %i", status); - return ERROR_JTAG_INIT_FAILED; - } - - return ERROR_OK; -} - -int jtagkey_init(void) -{ - u8 buf[3]; - FT_STATUS status; - DWORD bytes_written; - - low_output = 0x08; - low_direction = 0x1b; - - /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ - buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - - if (((FT_Write(ftdih, buf, 3, &bytes_written)) != FT_OK) || (bytes_written != 3)) - { - ERROR("couldn't write to ftdi device: %i", status); - return ERROR_JTAG_INIT_FAILED; - } - - if (strcmp(layout->name, "jtagkey") == 0) - { - nTRST = 0x01; - nTRSTnOE = 0x4; - nSRST = 0x02; - nSRSTnOE = 0x08; - } - else if (strcmp(layout->name, "jtagkey_prototype_v1") == 0) - { - nTRST = 0x02; - nTRSTnOE = 0x1; - nSRST = 0x08; - nSRSTnOE = 0x04; - } - else - { - ERROR("BUG: jtagkey_init called for non jtagkey layout"); - exit(-1); - } - - high_output = 0x0; - high_direction = 0x0f; - - if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) - { - high_output |= nTRSTnOE; - high_output &= ~nTRST; - } - else - { - high_output &= ~nTRSTnOE; - high_output |= nTRST; - } - - if (jtag_reset_config & RESET_SRST_PUSH_PULL) - { - high_output &= ~nSRSTnOE; - high_output |= nSRST; - } - else - { - high_output |= nSRSTnOE; - high_output &= ~nSRST; - } - - /* initialize high port */ - buf[0] = 0x82; /* command "set data bits low byte" */ - buf[1] = high_output; /* value */ - buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - - if (((FT_Write(ftdih, buf, 3, &bytes_written)) != FT_OK) || (bytes_written != 3)) - { - ERROR("couldn't write to ftdi device: %i", status); - return ERROR_JTAG_INIT_FAILED; - } - - return ERROR_OK; -} - -int ftd2xx_quit(void) -{ - FT_STATUS status; - - status = FT_Close(ftdih); - - free(ftd2xx_buffer); - - return ERROR_OK; -} - -int ftd2xx_handle_device_desc_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) -{ - if (argc == 1) - { - ftd2xx_device_desc = strdup(args[0]); - } - else - { - ERROR("expected exactly one argument to ftd2xx_device_desc "); - } - - return ERROR_OK; -} - -int ftd2xx_handle_layout_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) -{ - if (argc == 0) - return ERROR_OK; - - ftd2xx_layout = malloc(strlen(args[0]) + 1); - strcpy(ftd2xx_layout, args[0]); - - return ERROR_OK; -} - -int ftd2xx_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) -{ - if (argc >= 2) - { - ftd2xx_vid = strtol(args[0], NULL, 0); - ftd2xx_pid = strtol(args[1], NULL, 0); - } - else - { - WARNING("incomplete ftd2xx_vid_pid configuration directive"); - } - - return ERROR_OK; -} diff --git a/src/jtag/ftdi2232.c b/src/jtag/ftdi2232.c deleted file mode 100644 index c90cc2f9..00000000 --- a/src/jtag/ftdi2232.c +++ /dev/null @@ -1,633 +0,0 @@ -/*************************************************************************** - * Copyright (C) 2004 by Dominic Rath * - * Dominic.Rath@gmx.de * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - ***************************************************************************/ -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -/* project specific includes */ -#include "log.h" -#include "types.h" -#include "jtag.h" -#include "configuration.h" -#include "command.h" - -/* system includes */ -#include -#include -#include -#include -#include - -#include -#include - -/* enable this to debug io latency - */ -#if 0 -#define _DEBUG_USB_IO_ -#endif - -int ftdi2232_execute_queue(void); - -int ftdi2232_speed(int speed); -int ftdi2232_register_commands(struct command_context_s *cmd_ctx); -int ftdi2232_init(void); -int ftdi2232_quit(void); - -enum { FTDI2232_TRST = 0x10, FTDI2232_SRST = 0x40 }; -static u8 discrete_output = 0x0 | FTDI2232_TRST | FTDI2232_SRST; -static struct ftdi_context ftdic; - -static u8 *ftdi2232_buffer = NULL; -static int ftdi2232_buffer_size = 0; -static int ftdi2232_read_pointer = 0; -static int ftdi2232_expect_read = 0; -#define FTDI2232_BUFFER_SIZE 131072 -#define BUFFER_ADD ftdi2232_buffer[ftdi2232_buffer_size++] -#define BUFFER_READ ftdi2232_buffer[ftdi2232_read_pointer++] - -#define FTDI2232_SAVE_SIZE 1024 - -int ftdi2232_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); - -static u16 ftdi2232_vid = 0x0403; -static u16 ftdi2232_pid = 0x6010; - -jtag_interface_t ftdi2232_interface = -{ - - .name = "ftdi2232", - - .execute_queue = ftdi2232_execute_queue, - - .support_statemove = 1, - - .speed = ftdi2232_speed, - .register_commands = ftdi2232_register_commands, - .init = ftdi2232_init, - .quit = ftdi2232_quit, -}; - -int ftdi2232_speed(int speed) -{ - u8 buf[3]; - - buf[0] = 0x86; /* command "set divisor" */ - buf[1] = speed & 0xff; /* valueL (0=6MHz, 1=3MHz, 2=1.5MHz, ...*/ - buf[2] = (speed >> 8) & 0xff; /* valueH */ - - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - ftdi_write_data(&ftdic, buf, 3); - - return ERROR_OK; -} - -int ftdi2232_register_commands(struct command_context_s *cmd_ctx) -{ - register_command(cmd_ctx, NULL, "ftdi2232_vid_pid", ftdi2232_handle_vid_pid_command, - COMMAND_CONFIG, NULL); - - return ERROR_OK; -} - -void ftdi2232_end_state(state) -{ - if (tap_move_map[state] != -1) - end_state = state; - else - { - ERROR("BUG: %i is not a valid end state", state); - exit(-1); - } -} - -void ftdi2232_read_scan(enum scan_type type, u8* buffer, int scan_size) -{ - int num_bytes = ((scan_size + 7) / 8); - int bits_left = scan_size; - int cur_byte = 0; - - while(num_bytes-- > 1) - { - buffer[cur_byte] = BUFFER_READ; - cur_byte++; - bits_left -= 8; - } - - buffer[cur_byte] = 0x0; - - if (bits_left > 1) - { - buffer[cur_byte] = BUFFER_READ >> 1; - } - - buffer[cur_byte] = (buffer[cur_byte] | ((BUFFER_READ & 0x02) << 6)) >> (8 - bits_left); - -} - -void ftdi2232_debug_dump_buffer(void) -{ - int i; - for (i = 0; i < ftdi2232_buffer_size; i++) - { - printf("%2.2x ", ftdi2232_buffer[i]); - if (i % 16 == 15) - printf("\n"); - } - printf("\n"); - fflush(stdout); -} - -int ftdi2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) -{ - jtag_command_t *cmd; - u8 *buffer; - int scan_size; - enum scan_type type; - int retval; - - BUFFER_ADD = 0x87; /* send immediate command */ - - if (ftdi2232_buffer_size > FTDI2232_SAVE_SIZE) - { - ERROR("BUG: ftdi2232_buffer grew beyond %i byte (%i) - this is going to fail", FTDI2232_SAVE_SIZE, ftdi2232_buffer_size); - } - -#ifdef _DEBUG_USB_IO_ - DEBUG("write buffer (size %i):", ftdi2232_buffer_size); - ftdi2232_debug_dump_buffer(); -#endif - - if ((retval = ftdi_write_data(&ftdic, ftdi2232_buffer, ftdi2232_buffer_size)) < 0) - { - ERROR("ftdi_write_data returned %i", retval); - exit(-1); - } - - if (ftdi2232_expect_read) - { - int timeout = 100; - ftdi2232_buffer_size = 0; - - while ((ftdi2232_buffer_size < ftdi2232_expect_read) && timeout) - { - ftdi2232_buffer_size += ftdi_read_data(&ftdic, ftdi2232_buffer + ftdi2232_buffer_size, FTDI2232_BUFFER_SIZE - ftdi2232_buffer_size); - timeout--; - } - - if (ftdi2232_expect_read != ftdi2232_buffer_size) - { - ERROR("ftdi2232_expect_read (%i) != ftdi2232_buffer_size (%i) (%i retries)", ftdi2232_expect_read, ftdi2232_buffer_size, 100 - timeout); - ftdi2232_debug_dump_buffer(); - - exit(-1); - } - -#ifdef _DEBUG_USB_IO_ - DEBUG("read buffer (%i retries): %i bytes", 100 - timeout, ftdi2232_buffer_size); - ftdi2232_debug_dump_buffer(); -#endif - } - - ftdi2232_expect_read = 0; - ftdi2232_read_pointer = 0; - - cmd = first; - while (cmd != last) - { - switch (cmd->type) - { - case JTAG_SCAN: - type = jtag_scan_type(cmd->cmd.scan); - if (type != SCAN_OUT) - { - scan_size = jtag_scan_size(cmd->cmd.scan); - buffer = calloc(CEIL(scan_size, 8), 1); - ftdi2232_read_scan(type, buffer, scan_size); - jtag_read_buffer(buffer, cmd->cmd.scan); - free(buffer); - } - break; - default: - break; - } - cmd = cmd->next; - } - - ftdi2232_buffer_size = 0; - - return ERROR_OK; -} - -void ftdi2232_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size) -{ - int num_bytes = (scan_size + 7) / 8; - int bits_left = scan_size; - int cur_byte = 0; - int last_bit; - - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - if (ir_scan) - { - BUFFER_ADD = TAP_MOVE(cur_state, TAP_SI); - cur_state = TAP_SI; - } - else - { - BUFFER_ADD = TAP_MOVE(cur_state, TAP_SD); - cur_state = TAP_SD; - } - //DEBUG("added TMS scan (no read)"); - - /* add command for complete bytes */ - if (num_bytes > 1) - { - if (type == SCAN_IO) - { - /* Clock Data Bytes In and Out LSB First */ - BUFFER_ADD = 0x39; - //DEBUG("added TDI bytes (io %i)", num_bytes); - } - else if (type == SCAN_OUT) - { - /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x19; - //DEBUG("added TDI bytes (o)"); - } - else if (type == SCAN_IN) - { - /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x28; - //DEBUG("added TDI bytes (i %i)", num_bytes); - } - BUFFER_ADD = (num_bytes-2) & 0xff; - BUFFER_ADD = ((num_bytes-2) >> 8) & 0xff; - } - if (type != SCAN_IN) - { - /* add complete bytes */ - while(num_bytes-- > 1) - { - BUFFER_ADD = buffer[cur_byte]; - cur_byte++; - bits_left -= 8; - } - } - if (type == SCAN_IN) - { - bits_left -= 8 * (num_bytes - 1); - } - - /* the most signifcant bit is scanned during TAP movement */ - if (type != SCAN_IN) - last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1; - else - last_bit = 0; - - /* process remaining bits but the last one */ - if (bits_left > 1) - { - if (type == SCAN_IO) - { - /* Clock Data Bits In and Out LSB First */ - BUFFER_ADD = 0x3b; - //DEBUG("added TDI bits (io) %i", bits_left - 1); - } - else if (type == SCAN_OUT) - { - /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x1b; - //DEBUG("added TDI bits (o)"); - } - else if (type == SCAN_IN) - { - /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x2a; - //DEBUG("added TDI bits (i %i)", bits_left - 1); - } - BUFFER_ADD = bits_left - 2; - if (type != SCAN_IN) - BUFFER_ADD = buffer[cur_byte]; - } - - /* move from Shift-IR/DR to end state */ - if (type != SCAN_OUT) - { - /* Clock Data to TMS/CS Pin with Read */ - BUFFER_ADD = 0x6b; - //DEBUG("added TMS scan (read)"); - } - else - { - /* Clock Data to TMS/CS Pin (no Read) */ - BUFFER_ADD = 0x4b; - //DEBUG("added TMS scan (no read)"); - } - BUFFER_ADD = 0x6; - BUFFER_ADD = TAP_MOVE(cur_state, end_state) | (last_bit << 7); - cur_state = end_state; - -} - -int ftdi2232_predict_scan_out(int scan_size, enum scan_type type) -{ - int predicted_size = 6; - if (type == SCAN_IN) /* only from device to host */ - { - predicted_size += (CEIL(scan_size, 8) > 1) ? 3 : 0; - predicted_size += ((scan_size - 1) % 8) ? 2 : 0; - } - else /* host to device, or bidirectional */ - { - predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) + 3 - 1) : 0; - predicted_size += ((scan_size - 1) % 8) ? 3 : 0; - } - - return predicted_size; -} - -int ftdi2232_predict_scan_in(int scan_size, enum scan_type type) -{ - int predicted_size = 0; - - if (type != SCAN_OUT) - { - /* complete bytes */ - predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) - 1) : 0; - /* remaining bits - 1 */ - predicted_size += ((scan_size - 1) % 8) ? 1 : 0; - /* last bit (from TMS scan) */ - predicted_size += 1; - } - - //DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); - - return predicted_size; -} - -int ftdi2232_execute_queue() -{ - jtag_command_t *cmd = jtag_command_queue; /* currently processed command */ - jtag_command_t *first_unsent = cmd; /* next command that has to be sent */ - u8 *buffer; - int scan_size; /* size of IR or DR scan */ - enum scan_type type; - int i; - int predicted_size = 0; - int require_send = 0; - - ftdi2232_buffer_size = 0; - ftdi2232_expect_read = 0; - - while (cmd) - { - switch(cmd->type) - { - case JTAG_END_STATE: - if (cmd->cmd.end_state->end_state != -1) - ftdi2232_end_state(cmd->cmd.end_state->end_state); - break; - case JTAG_RESET: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 3; - if (ftdi2232_buffer_size + predicted_size + 1 > FTDI2232_SAVE_SIZE) - { - ftdi2232_send_and_recv(first_unsent, cmd); - require_send = 0; - first_unsent = cmd; - } - - if (cmd->cmd.reset->trst == 1) - { - cur_state = TAP_TLR; - discrete_output &= ~FTDI2232_TRST; - } - else if (cmd->cmd.reset->trst == 0) - { - discrete_output |= FTDI2232_TRST; - } - - if (cmd->cmd.reset->srst == 1) - discrete_output &= ~FTDI2232_SRST; - else if (cmd->cmd.reset->srst == 0) - discrete_output |= FTDI2232_SRST; - /* command "set data bits low byte" */ - BUFFER_ADD = 0x80; - /* value (TMS=1,TCK=0, TDI=0, TRST/SRST */ - BUFFER_ADD = 0x08 | discrete_output; - /* dir (output=1), TCK/TDI/TMS=out, TDO=in, TRST/SRST=out */ - BUFFER_ADD = 0x0b | FTDI2232_SRST | FTDI2232_TRST; - require_send = 1; - break; - case JTAG_RUNTEST: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 0; - if (cur_state != TAP_RTI) - predicted_size += 3; - predicted_size += 3 * CEIL(cmd->cmd.runtest->num_cycles, 7); - if ((cmd->cmd.runtest->end_state != -1) && (cmd->cmd.runtest->end_state != TAP_RTI)) - predicted_size += 3; - if ((cmd->cmd.runtest->end_state == -1) && (end_state != TAP_RTI)) - predicted_size += 3; - if (ftdi2232_buffer_size + predicted_size + 1 > FTDI2232_SAVE_SIZE) - { - ftdi2232_send_and_recv(first_unsent, cmd); - require_send = 0; - first_unsent = cmd; - } - if (cur_state != TAP_RTI) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, TAP_RTI); - cur_state = TAP_RTI; - require_send = 1; - } - i = cmd->cmd.runtest->num_cycles; - while (i > 0) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = (i > 7) ? 6 : (i - 1); - /* TMS data bits */ - BUFFER_ADD = 0x0; - cur_state = TAP_RTI; - i -= (i > 7) ? 7 : i; - //DEBUG("added TMS scan (no read)"); - } - if (cmd->cmd.runtest->end_state != -1) - ftdi2232_end_state(cmd->cmd.runtest->end_state); - if (cur_state != end_state) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, end_state); - cur_state = end_state; - //DEBUG("added TMS scan (no read)"); - } - require_send = 1; - break; - case JTAG_STATEMOVE: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 3; - if (ftdi2232_buffer_size + predicted_size + 1 > FTDI2232_SAVE_SIZE) - { - ftdi2232_send_and_recv(first_unsent, cmd); - require_send = 0; - first_unsent = cmd; - } - if (cmd->cmd.statemove->end_state != -1) - ftdi2232_end_state(cmd->cmd.statemove->end_state); - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, end_state); - //DEBUG("added TMS scan (no read)"); - cur_state = end_state; - require_send = 1; - break; - case JTAG_SCAN: - scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer); - type = jtag_scan_type(cmd->cmd.scan); - predicted_size = ftdi2232_predict_scan_out(scan_size, type); - if (ftdi2232_buffer_size + predicted_size + 1 > FTDI2232_SAVE_SIZE) - { - ftdi2232_send_and_recv(first_unsent, cmd); - require_send = 0; - first_unsent = cmd; - } - ftdi2232_expect_read += ftdi2232_predict_scan_in(scan_size, type); - //DEBUG("new read size: %i", ftdi2232_expect_read); - if (cmd->cmd.scan->end_state != -1) - ftdi2232_end_state(cmd->cmd.scan->end_state); - ftdi2232_add_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size); - require_send = 1; - if (buffer) - free(buffer); - break; - case JTAG_SLEEP: - jtag_sleep(cmd->cmd.sleep->us); - break; - default: - ERROR("BUG: unknown JTAG command type encountered"); - exit(-1); - } - cmd = cmd->next; - } - - if (require_send > 0) - ftdi2232_send_and_recv(first_unsent, cmd); - - return ERROR_OK; -} - -int ftdi2232_init(void) -{ - if (ftdi_init(&ftdic) < 0) - return ERROR_JTAG_INIT_FAILED; - - /* context, vendor id, product id */ - if (ftdi_usb_open(&ftdic, ftdi2232_vid, ftdi2232_pid) < 0) - { - ERROR("unable to open ftdi device: %s", ftdic.error_str); - return ERROR_JTAG_INIT_FAILED; - } - - if (ftdi_usb_reset(&ftdic) < 0) - { - ERROR("unable to reset ftdi device"); - return ERROR_JTAG_INIT_FAILED; - } - - if (ftdi_set_latency_timer(&ftdic, 1) < 0) - { - ERROR("unable to set latency timer"); - return ERROR_JTAG_INIT_FAILED; - } - - ftdi2232_buffer_size = 0; - ftdi2232_buffer = malloc(FTDI2232_BUFFER_SIZE); - - ftdic.bitbang_mode = 0; /* Reset controller */ - ftdi_enable_bitbang(&ftdic, 0x0b | FTDI2232_SRST | FTDI2232_TRST); /* ctx, i/o mask (out=1, in=0) */ - - ftdic.bitbang_mode = 2; /* MPSSE mode */ - ftdi_enable_bitbang(&ftdic, 0x0b | FTDI2232_SRST | FTDI2232_TRST); /* ctx, i/o mask (out=1, in=0) */ - - if (ftdi_usb_purge_buffers(&ftdic) < 0) - { - ERROR("ftdi_purge_buffers: %s", ftdic.error_str); - return ERROR_JTAG_INIT_FAILED; - } - - /* initialize low byte for jtag */ - BUFFER_ADD = 0x80; /* command "set data bits low byte" */ - BUFFER_ADD = 0x08 | FTDI2232_SRST | FTDI2232_TRST; /* value (TMS=1,TCK=0, TDI=0, xRST high) */ - BUFFER_ADD = 0x0b | FTDI2232_SRST | FTDI2232_TRST; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */ - BUFFER_ADD = 0x85; /* command "Disconnect TDI/DO to TDO/DI for Loopback" */ - ftdi2232_debug_dump_buffer(); - if (ftdi_write_data(&ftdic, ftdi2232_buffer, ftdi2232_buffer_size) != 4) - return ERROR_JTAG_INIT_FAILED; - - ftdi2232_speed(jtag_speed); - - return ERROR_OK; -} - -int ftdi2232_quit(void) -{ - ftdi_disable_bitbang(&ftdic); - - ftdi_usb_close(&ftdic); - - ftdi_deinit(&ftdic); - - free(ftdi2232_buffer); - - return ERROR_OK; -} - -int ftdi2232_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) -{ - if (argc >= 2) - { - ftdi2232_vid = strtol(args[0], NULL, 0); - ftdi2232_pid = strtol(args[1], NULL, 0); - } - else - { - WARNING("incomplete ftdi2232_vid_pid configuration directive"); - } - - return ERROR_OK; -} diff --git a/src/jtag/jtag.c b/src/jtag/jtag.c index 0ffeb56e..a60aacd0 100644 --- a/src/jtag/jtag.c +++ b/src/jtag/jtag.c @@ -124,12 +124,12 @@ jtag_event_callback_t *jtag_event_callbacks; extern jtag_interface_t parport_interface; #endif -#if BUILD_FTDI2232 == 1 - extern jtag_interface_t ftdi2232_interface; +#if BUILD_FT2232_FTD2XX == 1 + extern jtag_interface_t ft2232_interface; #endif -#if BUILD_FTD2XX == 1 - extern jtag_interface_t ftd2xx_interface; +#if BUILD_FT2232_LIBFTDI == 1 + extern jtag_interface_t ft2232_interface; #endif #if BUILD_AMTJTAGACCEL == 1 @@ -144,11 +144,11 @@ jtag_interface_t *jtag_interfaces[] = { #if BUILD_PARPORT == 1 &parport_interface, #endif -#if BUILD_FTDI2232 == 1 - &ftdi2232_interface, +#if BUILD_FT2232_FTD2XX == 1 + &ft2232_interface, #endif -#if BUILD_FTD2XX == 1 - &ftd2xx_interface, +#if BUILD_FT2232_LIBFTDI == 1 + &ft2232_interface, #endif #if BUILD_AMTJTAGACCEL == 1 &amt_jtagaccel_interface, @@ -1119,7 +1119,9 @@ int jtag_validate_chain() { if (buf_get_u32(ir_test, chain_pos, 2) != 0x1) { - ERROR("Error validating JTAG scan chain, IR mismatch"); + char *cbuf = buf_to_char(ir_test, total_ir_length); + ERROR("Error validating JTAG scan chain, IR mismatch, scan returned %s", cbuf); + free(cbuf); exit(-1); } chain_pos += device->ir_length; @@ -1128,7 +1130,9 @@ int jtag_validate_chain() if (buf_get_u32(ir_test, chain_pos, 2) != 0x3) { - ERROR("Error validating JTAG scan chain, IR mismatch"); + char *cbuf = buf_to_char(ir_test, total_ir_length); + ERROR("Error validating JTAG scan chain, IR mismatch, scan returned %s", cbuf); + free(cbuf); exit(-1); } @@ -1217,6 +1221,12 @@ int jtag_init(struct command_context_s *cmd_ctx) * didn't match one of the compiled-in interfaces */ ERROR("No valid jtag interface found (%s)", jtag_interface); + ERROR("compiled-in jtag interfaces:"); + for (i = 0; jtag_interfaces[i]; i++) + { + ERROR("%i: %s", i, jtag_interfaces[i]->name); + } + jtag = NULL; return ERROR_JTAG_INVALID_INTERFACE; } diff --git a/src/jtag/jtag.h b/src/jtag/jtag.h index f7630a5e..0d71301f 100644 --- a/src/jtag/jtag.h +++ b/src/jtag/jtag.h @@ -270,4 +270,5 @@ extern int jtag_register_event_callback(int (*callback)(enum jtag_event event, v #define ERROR_JTAG_QUEUE_FAILED (-104) #define ERROR_JTAG_RESET_WOULD_ASSERT_TRST (-105) #define ERROR_JTAG_RESET_CANT_SRST (-106) +#define ERROR_JTAG_DEVICE_ERROR (-107) #endif /* JTAG_H */ diff --git a/src/jtag/parport.c b/src/jtag/parport.c index 21aa5131..4b0b193c 100644 --- a/src/jtag/parport.c +++ b/src/jtag/parport.c @@ -51,8 +51,15 @@ #include #if PARPORT_USE_PPDEV == 1 +#ifdef __FreeBSD__ +#include +#include +#define PPRSTATUS PPIGSTATUS +#define PPWDATA PPISDATA +#else #include #include +#endif #include #include #endif @@ -310,11 +317,17 @@ int parport_init(void) return ERROR_JTAG_INIT_FAILED; } +#ifdef __FreeBSD__ + DEBUG("opening /dev/ppi%d...", parport_port); + + snprintf(buffer, 256, "/dev/ppi%d", parport_port); + device_handle = open(buffer, O_WRONLY); +#else DEBUG("opening /dev/parport%d...", parport_port); snprintf(buffer, 256, "/dev/parport%d", parport_port); device_handle = open(buffer, O_WRONLY); - +#endif if (device_handle<0) { ERROR("cannot open device. check it exists and that user read and write rights are set"); @@ -323,6 +336,7 @@ int parport_init(void) DEBUG("...open"); +#ifndef __FreeBSD__ i=ioctl(device_handle, PPCLAIM); if (i<0) { @@ -345,6 +359,7 @@ int parport_init(void) ERROR("cannot set compatible 1284 mode to device"); return ERROR_JTAG_INIT_FAILED; } +#endif #else if (parport_port == 0) { -- cgit v1.2.3