From dbbc9c41f7db210b0a4e226540a28e0a8a5019bf Mon Sep 17 00:00:00 2001
From: zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Wed, 27 May 2009 06:49:24 +0000
Subject: Move TCL script files -- Step 2 of 2: - Move src/tcl to tcl/. -
 Update top Makefile.am to use new path name.

git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 tcl/board/dm355evm.cfg | 119 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)
 create mode 100644 tcl/board/dm355evm.cfg

(limited to 'tcl/board/dm355evm.cfg')

diff --git a/tcl/board/dm355evm.cfg b/tcl/board/dm355evm.cfg
new file mode 100644
index 00000000..9e6dc73b
--- /dev/null
+++ b/tcl/board/dm355evm.cfg
@@ -0,0 +1,119 @@
+#
+# DM355 EVM board
+#   http://focus.ti.com/docs/toolsw/folders/print/tmdsevm355.html
+#   http://c6000.spectrumdigital.com/evmdm355/
+
+source [find target/ti_dm355.cfg]
+
+reset_config trst_and_srst separate
+
+# NOTE:  disable or replace this call to dm355evm_init if you're
+# debugging new UBL code from SRAM.
+$_TARGETNAME configure -event reset-init { dm355evm_init }
+
+#
+# This post-reset init is called when the MMU isn't active, all IRQs
+# are disabled, etc.  It should do most of what a UBL does, except for
+# loading code (like U-Boot) into DRAM and running it.
+#
+proc dm355evm_init {} {
+	global dm355
+
+	puts "Initialize DM355 EVM board"
+
+	# CLKIN	= 24 MHz ... can't talk quickly to ARM yet
+	jtag_khz 1500
+
+	########################
+	# PLL1		= 432 MHz (/8, x144)
+	# ...SYSCLK1	= 216 MHz (/2)  ... ARM, MJCP
+	# ...SYSCLK2	= 108 MHz (/4)  ... Peripherals
+	# ...SYSCLK3	= 27  MHz (/16) ... VPBE, DAC
+	# ...SYSCLK4	= 108 MHz (/4)  ... VPSS
+	#	pll1.{prediv,div1,div2} are fixed
+	#	pll1.postdiv set in MISC (for *this* speed grade)
+
+	set addr [dict get $dm355 pllc1]
+	set pll_divs [dict create]
+	dict set pll_divs div3 16
+	dict set pll_divs div4 8
+	pll_setup $addr 144 $pll_divs
+
+	# ARM is now running at 216 MHz, so JTAG can go faster
+	jtag_khz 20000
+
+	########################
+	# PLL2		= 342 MHz (/8, x114)
+	# ....SYSCLK1	= 342 MHz (/1)  ... DDR PHY at 171 MHz, 2x clock
+	#	pll2.{postdiv,div1} are fixed
+
+	set addr [dict get $dm355 pllc2]
+	set pll_divs [dict create]
+	dict set pll_divs prediv 8
+	pll_setup $addr 114 $pll_divs
+
+	########################
+	# PINMUX
+
+	# All Video Inputs
+	davinci_pinmux $dm355 0 0x00007f55
+	# All Video Outputs
+	davinci_pinmux $dm355 1 0x00145555
+	# EMIFA (NOTE: more could be set up for use as GPIOs)
+	davinci_pinmux $dm355 2 0x00000c08
+	# SPI0, SPI1, UART1, I2C, SD0, SD1, McBSP0, CLKOUTs
+	davinci_pinmux $dm355 3 0x1bff55ff
+	# MMC/SD0 instead of MS; SPI0
+	davinci_pinmux $dm355 4 0x00000000
+
+	########################
+	# PSC setup (minimal)
+
+	# DDR EMIF/13, AEMIF/14, UART0/19
+	psc_enable 13
+	psc_enable 14
+	psc_enable 19
+	psc_go
+
+	########################
+	# DDR2 EMIF
+
+	# FIXME setup
+
+	########################
+	# ASYNC EMIF
+
+	set addr [dict get $dm355 a_emif]
+
+	# slow/pessimistic timings
+	set nand_timings 0x40400204
+	# fast (25% faster page reads)
+	#set nand_timings 0x0400008c
+
+	# AWCCR
+	mww [expr $addr + 0x04] 0xff
+	# CS0 == socketed NAND (default MT29F16G08FAA, 2GByte)
+	mww [expr $addr + 0x10] $nand_timings
+	# CS1 == dm9000 Ethernet
+	mww [expr $addr + 0x14] 0x00a00505
+	# NANDFCR -- only CS0 has NAND
+	mww [expr $addr + 0x60] 0x01
+
+	########################
+	# UART0
+
+	# FIXME setup
+}
+
+# NAND -- socket has two chipselects, MT29F16G08FAA puts 1GByte on each one.
+#
+# NOTE:  "hwecc4" here presumes that if you're using the standard 2GB NAND
+# you either (a) have 'new' DM355 chips, with boot ROMs that don't need to
+# use "hwecc4_infix" for the UBL; or else (b) aren't updating anything that
+# needs infix layout ... like an old UBL, old U-Boot, old MVL kernel, etc.
+nand device davinci 0 0x02000000 hwecc4 0x01e10000
+nand device davinci 0 0x02004000 hwecc4 0x01e10000
+
+# FIXME
+#  - support writing UBL with its header (new layout only with new ROMs)
+#  - support writing ABL/U-Boot with its header (new layout)
-- 
cgit v1.2.3