From dbbc9c41f7db210b0a4e226540a28e0a8a5019bf Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:49:24 +0000 Subject: Move TCL script files -- Step 2 of 2: - Move src/tcl to tcl/. - Update top Makefile.am to use new path name. git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- tcl/target/samsung_s3c2440.cfg | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 tcl/target/samsung_s3c2440.cfg (limited to 'tcl/target/samsung_s3c2440.cfg') diff --git a/tcl/target/samsung_s3c2440.cfg b/tcl/target/samsung_s3c2440.cfg new file mode 100644 index 00000000..12bb4085 --- /dev/null +++ b/tcl/target/samsung_s3c2440.cfg @@ -0,0 +1,35 @@ +# Target configuration for the Samsung 2440 system on chip +# Tested on a S3C2440 Evaluation board by keesj +# Processor : ARM920Tid(wb) rev 0 (v4l) +# Info: JTAG tap: s3c2440.cpu tap/device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0) + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME s3c2440 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a bigendian + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x0032409d +} + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1 + +#reset configuration +reset_config trst_and_srst + -- cgit v1.2.3