From 1b0f194d90f38e363939b7f11260fc64680016e1 Mon Sep 17 00:00:00 2001 From: Takács Áron Date: Tue, 14 Sep 2010 11:15:35 +0200 Subject: board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit the new Marvell PXA270M processor has a new TAPID: 0x89265013. Attached you will find a patch for target/pxa270.cfg that will handle this. I have also attached a board/colibri.cfg file to support the Colibri PXA270 module by Toradex. Signed-off-by: Øyvind Harboe --- tcl/board/colibri.cfg | 13 +++++++++++++ tcl/target/pxa270.cfg | 8 +++++++- 2 files changed, 20 insertions(+), 1 deletion(-) create mode 100644 tcl/board/colibri.cfg (limited to 'tcl') diff --git a/tcl/board/colibri.cfg b/tcl/board/colibri.cfg new file mode 100644 index 00000000..7c1f1cb5 --- /dev/null +++ b/tcl/board/colibri.cfg @@ -0,0 +1,13 @@ +# Toradex Colibri PXA270 +source [find target/pxa270.cfg] +reset_config trst_and_srst srst_push_pull +adapter_nsrst_assert_width 40 + +# CS0 -- one bank of CFI flash, 32 MBytes +# the bank is 32-bits wide, two 16-bit chips in parallel +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME + + + + diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg index 7aaef8c7..f5d2c85f 100644 --- a/tcl/target/pxa270.cfg +++ b/tcl/target/pxa270.cfg @@ -27,6 +27,12 @@ if { [info exists CPUTAPID2 ] } { set _CPUTAPID2 0x79265013 } +if { [info exists CPUTAPID3 ] } { + set _CPUTAPID2 $CPUTAPID3 +} else { + # set useful default + set _CPUTAPID3 0x89265013 +} # set adapter_nsrst_delay to the delay introduced by your reset circuit # the rest of the needed delays are built into the openocd program @@ -36,7 +42,7 @@ adapter_nsrst_delay 260 jtag_ntrst_delay 250 set _TARGETNAME $_CHIPNAME.cpu -jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 +jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3 target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x # maps to PXA internal RAM. If you are using a PXA255 -- cgit v1.2.3