From 2e1eaaae35e506efe6190817876b1078885a83d7 Mon Sep 17 00:00:00 2001 From: Øyvind Harboe Date: Fri, 21 May 2010 13:56:05 +0200 Subject: at91sam9260: use RCLK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It might be possible to get this target going without RCLK, but it would require more careful analysis and usage of the reset events. Enable fast memory accesses. Tested on an at91sam9260 custom board w/external DRAM and flash. Signed-off-by: Øyvind Harboe --- tcl/target/at91sam9260_ext_RAM_ext_flash.cfg | 31 +++++++++++----------------- 1 file changed, 12 insertions(+), 19 deletions(-) (limited to 'tcl') diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg index d2bf66fe..535ae0fb 100644 --- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg +++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg @@ -1,8 +1,4 @@ - - - -adapter_khz 4 - +jtag_rclk 4 ###################################### # Target: Atmel AT91SAM9260 @@ -44,26 +40,29 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs -$_TARGETNAME invoke-event halted - # Internal sram1 memory $_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 scan_chain -$_TARGETNAME configure -event reset-deassert-post {at91sam_init} +$_TARGETNAME configure -event reset-start { + # at reset chip runs at 32khz + jtag_rclk 8 +} +$_TARGETNAME configure -event reset-init {at91sam_init} # Flash configuration #flash bank cfi set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 $_TARGETNAME +# Faster memory downloads. This is disabled automatically during +# reset init since all reset init sequences are too short for +# fast memory access +arm7_9 dcc_downloads enable +arm7_9 fast_memory_access enable proc at91sam_init { } { - - # at reset chip runs at 32khz - adapter_khz 8 - halt mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog @@ -79,16 +78,13 @@ proc at91sam_init { } { sleep 10 # wait 10 ms # Now run at anything fast... ie: 10mhz! - adapter_khz 10000 # Increase JTAG Speed to 6 MHz - arm7_9 dcc_downloads enable # Enable faster DCC downloads + jtag_rclk 10000 # Increase JTAG Speed to 6 MHz mww 0xffffec00 0x0a0a0a0a # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit mww 0xffffec04 0x0b0b0b0b # SMC_PULSE0 mww 0xffffec08 0x00160016 # SMC_CYCLE0 mww 0xffffec0c 0x00161003 # SMC_MODE0 - flash probe 0 # Identify flash bank 0 - mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31 mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 @@ -123,6 +119,3 @@ proc at91sam_init { } { mww 0x20000000 0 mww 0xffffea04 0x5d2 # SDRAMC_TR : Set refresh timer count to 15us } - - - -- cgit v1.2.3