From 32188c500468c117d2a79106ba9ae41d61ce1897 Mon Sep 17 00:00:00 2001 From: Viktar Palstsiuk Date: Thu, 11 Feb 2010 21:09:21 +0100 Subject: target library: configuration files for openocd tested with Atmel SAM-ICE V6 JTAG. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Øyvind Harboe --- tcl/board/atmel_at91sam9rl-ek.cfg | 75 +++++++++++++++++++++++++++++++++++++++ tcl/target/at91sam9rl.cfg | 44 +++++++++++++++++++++++ 2 files changed, 119 insertions(+) create mode 100644 tcl/board/atmel_at91sam9rl-ek.cfg create mode 100644 tcl/target/at91sam9rl.cfg (limited to 'tcl') diff --git a/tcl/board/atmel_at91sam9rl-ek.cfg b/tcl/board/atmel_at91sam9rl-ek.cfg new file mode 100644 index 00000000..3b932bf4 --- /dev/null +++ b/tcl/board/atmel_at91sam9rl-ek.cfg @@ -0,0 +1,75 @@ +################################################################################ +# +# Generated for Atmel AT91SAM9RL-EK evaluation board using Atmel SAM-ICE (J-Link) V6 +# +# Atmel AT91SAM9RL : PLL = 200 MHz, MCK = 100 MHz +# OSCSEL configured for external 32.768 kHz crystal +# +# 32-bit SDRAM : 2 x Micron MT48LC16M16A2, 4M x 16Bit x 4 Banks +# +################################################################################ + +# We add to the minimal configuration. +source [find target/at91sam9rl.cfg] + +$_TARGETNAME configure -event reset-start { + # At reset CPU runs at 32.768 kHz. + # JTAG Frequency must be 6 times slower if RCLK is not supported. + jtag_rclk 5 + halt + # RSTC_MR : enable user reset, MMU may be enabled... use physical address + mww phys 0xfffffd08 0xa5000501 +} + +$_TARGETNAME configure -event reset-init { + mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog + + mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator + sleep 20 # wait 20 ms + mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator + sleep 10 # wait 10 ms + mww 0xfffffc28 0x2031bf03 # CKGR_PLLR: Set PLL Register for 200 MHz + sleep 20 # wait 20 ms + mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler (divide by 2) + sleep 10 # wait 10 ms + mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLL is selected (100 MHz) + sleep 10 # wait 10 ms + + # Increase JTAG Speed to 6 MHz if RCLK is not supported + jtag_rclk 6000 + + arm7_9 dcc_downloads enable # Enable faster DCC downloads + + mww 0xfffff670 0xffff0000 # PIO_ASR : Select peripheral function for D16..D31 (PIOB) + mww 0xfffff604 0xffff0000 # PIO_PDR : Disable PIO function for D16..D31 (PIOB) + + mww 0xffffef20 0x00010002 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory + + mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks) + + mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command + mww 0x20000000 0 + mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0x20000000 0 + mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0x20000000 0 + mww 0xffffea00 0x0 # SDRAMC_MR : normal mode + mww 0x20000000 0 + mww 0xffffea04 0x2b6 # SDRAMC_TR : Set refresh timer count to 7us +} diff --git a/tcl/target/at91sam9rl.cfg b/tcl/target/at91sam9rl.cfg new file mode 100644 index 00000000..6db18261 --- /dev/null +++ b/tcl/target/at91sam9rl.cfg @@ -0,0 +1,44 @@ +###################################### +# Target: Atmel AT91SAM9RL +###################################### + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME at91sam9rl +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x0792603f +} + +reset_config trst_and_srst separate trst_push_pull srst_open_drain + +# +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +jtag_nsrst_delay 300 +jtag_ntrst_delay 200 + +jtag_rclk 3 + +###################### +# Target configuration +###################### + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs + +# Internal sram1 memory +$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x10000 -work-area-backup 1 + + -- cgit v1.2.3