From 48edd58c3941c562a5a7ea78432a28e72108bbe4 Mon Sep 17 00:00:00 2001
From: Øyvind Harboe <oyvind.harboe@zylin.com>
Date: Tue, 1 Dec 2009 10:03:15 +0100
Subject: target: at91eb40a.cfg is a board, not a target.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Also updated to use target name when creating flash
and set jtag_khz to 16000.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
---
 tcl/board/at91eb40a.cfg  | 65 ++++++++++++++++++++++++++++++++++++++++++++++++
 tcl/target/at91eb40a.cfg | 62 ---------------------------------------------
 2 files changed, 65 insertions(+), 62 deletions(-)
 create mode 100644 tcl/board/at91eb40a.cfg
 delete mode 100644 tcl/target/at91eb40a.cfg

(limited to 'tcl')

diff --git a/tcl/board/at91eb40a.cfg b/tcl/board/at91eb40a.cfg
new file mode 100644
index 00000000..62d3c9c3
--- /dev/null
+++ b/tcl/board/at91eb40a.cfg
@@ -0,0 +1,65 @@
+#Script for AT91EB40a
+
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
+   set  _CHIPNAME at91eb40a
+}
+
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0x1f0f0f0f
+}
+
+
+#Atmel ties SRST & TRST together, at which point it makes
+#no sense to use TRST, but use TMS instead.
+#
+#The annoying thing with tying SRST & TRST together is that
+#there is no way to halt the CPU *before and during* the
+#SRST reset, which means that the CPU will run a number
+#of cycles before it can be halted(as much as milliseconds).
+reset_config srst_only srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+#target configuration
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+
+# speed up memory downloads
+arm7_9 fast_memory_access enable
+arm7_9 dcc_downloads enable
+
+#flash driver
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 $_TARGETNAME ecos/at91eb40a.elf
+
+# required for usable performance. Used for lots of
+# other things than flash programming.
+$_TARGETNAME configure -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0
+
+$_TARGETNAME configure -event reset-init {
+	puts "Running reset init script for AT91EB40A"
+	# Reset script for AT91EB40a
+	reg cpsr 0x000000D3
+	mww 0xFFE00020 0x1
+	mww 0xFFE00024 0x00000000
+	mww 0xFFE00000 0x01002539
+	mww 0xFFFFF124 0xFFFFFFFF
+	mww 0xffff0010 0x100
+	mww 0xffff0034 0x100
+}
+
+# This target is pretty snappy...
+jtag_khz 16000
diff --git a/tcl/target/at91eb40a.cfg b/tcl/target/at91eb40a.cfg
deleted file mode 100644
index e78cceac..00000000
--- a/tcl/target/at91eb40a.cfg
+++ /dev/null
@@ -1,62 +0,0 @@
-#Script for AT91EB40a
-
-if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
-} else {
-   set  _CHIPNAME at91eb40a
-}
-
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-  # force an error till we get a good number
-   set _CPUTAPID 0x1f0f0f0f
-}
-
-
-#Atmel ties SRST & TRST together, at which point it makes
-#no sense to use TRST, but use TMS instead.
-#
-#The annoying thing with tying SRST & TRST together is that
-#there is no way to halt the CPU *before and during* the
-#SRST reset, which means that the CPU will run a number
-#of cycles before it can be halted(as much as milliseconds).
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-#target configuration
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
-
-# speed up memory downloads
-arm7_9 fast_memory_access enable
-arm7_9 dcc_downloads enable
-
-#flash driver
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
-
-# required for usable performance. Used for lots of
-# other things than flash programming.
-$_TARGETNAME configure -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0
-
-$_TARGETNAME configure -event reset-init {
-	puts "Running reset init script for AT91EB40A"
-	# Reset script for AT91EB40a
-	reg cpsr 0x000000D3
-	mww 0xFFE00020 0x1
-	mww 0xFFE00024 0x00000000
-	mww 0xFFE00000 0x01002539
-	mww 0xFFFFF124 0xFFFFFFFF
-	mww 0xffff0010 0x100
-	mww 0xffff0034 0x100
-}
-- 
cgit v1.2.3