From a9d0b3de44c2ecbe011d5b01d17c18b0e969cc53 Mon Sep 17 00:00:00 2001 From: Piotr Esden-Tempski Date: Mon, 29 Nov 2010 12:35:39 -0800 Subject: Updated Floss-JTAG config file to support v0.3 and newer. Also added noeeprom version of the config file for older versions of Floss-JTAG. --- tcl/interface/flossjtag-noeeprom.cfg | 19 +++++++++++++++++++ tcl/interface/flossjtag.cfg | 11 ++++++++++- 2 files changed, 29 insertions(+), 1 deletion(-) create mode 100644 tcl/interface/flossjtag-noeeprom.cfg (limited to 'tcl') diff --git a/tcl/interface/flossjtag-noeeprom.cfg b/tcl/interface/flossjtag-noeeprom.cfg new file mode 100644 index 00000000..4e3466e4 --- /dev/null +++ b/tcl/interface/flossjtag-noeeprom.cfg @@ -0,0 +1,19 @@ +# +# FlossJTAG +# +# http://github.com/esden/floss-jtag +# +# This is the pre v0.3 Floss-JTAG compatible config file. It can also be used +# for newer versions of Floss-JTAG with empty or not populated eeprom. If you +# have several Floss-JTAG connected you have to use the usb id to select a +# specific one. +# +# If you have a Floss-JTAG WITH eeprom that is programmed use flossjtag.cfg +# file. +# + +interface ft2232 +ft2232_vid_pid 0x0403 0x6010 +ft2232_device_desc "Dual RS232-HS" +ft2232_layout "usbjtag" +ft2232_latency 2 diff --git a/tcl/interface/flossjtag.cfg b/tcl/interface/flossjtag.cfg index 396e9648..491f39aa 100644 --- a/tcl/interface/flossjtag.cfg +++ b/tcl/interface/flossjtag.cfg @@ -3,9 +3,18 @@ # # http://github.com/esden/floss-jtag # +# This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the +# existence of an eeprom on Floss-JTAG containing a name. If you have several +# Floss-JTAG adapters connected you can use the serial number to select a +# specific device. +# +# If your Floss-JTAG does not have an eeprom or eeprom is empty use +# flossjtag-noeeprom.cfg file. +# interface ft2232 ft2232_vid_pid 0x0403 0x6010 -ft2232_device_desc "Dual RS232-HS" +ft2232_device_desc "FLOSS-JTAG" +#ft2232_serial "FJ000001" ft2232_layout "usbjtag" ft2232_latency 2 -- cgit v1.2.3