From f92b104d8d9e50dc4257c79f4104273cf92dab38 Mon Sep 17 00:00:00 2001 From: oharboe Date: Fri, 5 Jun 2009 08:35:24 +0000 Subject: David Brownell target/at91rm9200.cfg cleanup git-svn-id: svn://svn.berlios.de/openocd/trunk@2075 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- tcl/target/at91rm9200.cfg | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) (limited to 'tcl') diff --git a/tcl/target/at91rm9200.cfg b/tcl/target/at91rm9200.cfg index 58c7318e..0e672ff3 100644 --- a/tcl/target/at91rm9200.cfg +++ b/tcl/target/at91rm9200.cfg @@ -1,3 +1,5 @@ +# Atmel AT91rm9200 +# http://atmel.com/products/at91/ reset_config trst_and_srst @@ -21,31 +23,27 @@ if { [info exists CPUTAPID ] } { # Never allow the following! if { $_CPUTAPID == 0x15b0203f } { - puts "-------------------------------------------------------" - puts "- ERROR: -" - puts "- ERROR: TapID 0x15b0203f is wrong for at91rm9200 -" - puts "- ERROR: The chip/board has a JTAG select pin/jumper -" - puts "- ERROR: -" - puts "- ERROR: In one position (0x05b0203f) it selects the -" - puts "- ERROR: ARM CPU, in the other position (0x1b0203f) -" - puts "- ERROR: it selects boundry-scan not the ARM -" - puts "- ERROR: -" - puts "-------------------------------------------------------" + echo "-------------------------------------------------------" + echo "- ERROR: -" + echo "- ERROR: TapID 0x15b0203f is wrong for at91rm9200 -" + echo "- ERROR: The chip/board has a JTAG select pin/jumper -" + echo "- ERROR: -" + echo "- ERROR: In one position (0x05b0203f) it selects the -" + echo "- ERROR: ARM CPU, in the other position (0x1b0203f) -" + echo "- ERROR: it selects boundry-scan not the ARM -" + echo "- ERROR: -" + echo "-------------------------------------------------------" } jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - # Create the GDB Target. -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME + # AT91RM9200 has a 16K block of sram @ 0x0020.0000 -$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1 +$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 \ + -work-area-size 0x4000 -work-area-backup 1 # This chip has a DCC ... use it arm7_9 dcc_downloads enable - - - - - -- cgit v1.2.3