From 06433b2d64673ad6814a9c2da8e059e2e682cb4a Mon Sep 17 00:00:00 2001
From: ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Sat, 1 Mar 2008 16:26:48 +0000
Subject: - updated svn:eol-style prop to native

git-svn-id: svn://svn.berlios.de/openocd/trunk@418 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 .../examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg | 86 +++++++++++-----------
 1 file changed, 43 insertions(+), 43 deletions(-)

(limited to 'testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg')

diff --git a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
index e802499c..d526dd24 100644
--- a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
+++ b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
@@ -1,43 +1,43 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-# tell gdb our flash memory map
-# and enable flash programming
-gdb_memory_map enable
-gdb_flash_program enable
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 0
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_init 0 arm7tdmi
-run_and_halt_time 0 30
-
-target_script 0 reset .\prj\sam7s256_reset.script
-
-working_area 0 0x00200000 0x4000 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank at91sam7 0 0 0 0 0
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 0
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_init 0 arm7tdmi
+run_and_halt_time 0 30
+
+target_script 0 reset .\prj\sam7s256_reset.script
+
+working_area 0 0x00200000 0x4000 nobackup
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank at91sam7 0 0 0 0 0
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
-- 
cgit v1.2.3