/*************************************************************************** * Copyright (C) 2005 by Dominic Rath * * Dominic.Rath@gmx.de * * * * Copyright (C) 2007,2008 Øyvind Harboe * * oyvind.harboe@zylin.com * * * * Copyright (C) 2008 Peter Hettkamp * * peter.hettkamp@htp-tel.de * * * * Copyright (C) 2009 SoftPLC Corporation. http://softplc.com * * dick@softplc.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* The specification for SVF is available here: * http://www.asset-intertech.com/support/svf.pdf * Below, this document is refered to as the "SVF spec". * * The specification for XSVF is available here: * http://www.xilinx.com/support/documentation/application_notes/xapp503.pdf * Below, this document is refered to as the "XSVF spec". */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "xsvf.h" #include "jtag.h" #include "command.h" #include "log.h" #include #include #include #include #include #include #include #include /* XSVF commands, from appendix B of xapp503.pdf */ #define XCOMPLETE 0x00 #define XTDOMASK 0x01 #define XSIR 0x02 #define XSDR 0x03 #define XRUNTEST 0x04 #define XREPEAT 0x07 #define XSDRSIZE 0x08 #define XSDRTDO 0x09 #define XSETSDRMASKS 0x0A #define XSDRINC 0x0B #define XSDRB 0x0C #define XSDRC 0x0D #define XSDRE 0x0E #define XSDRTDOB 0x0F #define XSDRTDOC 0x10 #define XSDRTDOE 0x11 #define XSTATE 0x12 #define XENDIR 0x13 #define XENDDR 0x14 #define XSIR2 0x15 #define XCOMMENT 0x16 #define XWAIT 0x17 /* XWAITSTATE is not in the xilinx XSVF spec, but the svf2xsvf.py translator * generates this. Arguably it is needed because the XSVF XRUNTEST command * was ill conceived and does not directly flow out of the SVF RUNTEST command. * This XWAITSTATE does map directly from the SVF RUNTEST command. */ #define XWAITSTATE 0x18 /* Lattice has extended the SVF file format, and Dick Hollenbeck's python based * SVF2XSVF converter supports these 3 additional XSVF opcodes, LCOUNT, LDELAY, LSDR. * Here is an example of usage of the 3 lattice opcode extensions: ! Set the maximum loop count to 25. LCOUNT 25; ! Step to DRPAUSE give 5 clocks and wait for 1.00e+000 SEC. LDELAY DRPAUSE 5 TCK 1.00E-003 SEC; ! Test for the completed status. Match means pass. ! Loop back to LDELAY line if not match and loop count less than 25. LSDR 1 TDI (0) TDO (1); */ #define LCOUNT 0x19 #define LDELAY 0x1A #define LSDR 0x1B #define XTRST 0x1C /* XSVF valid state values for the XSTATE command, from appendix B of xapp503.pdf */ #define XSV_RESET 0x00 #define XSV_IDLE 0x01 #define XSV_DRSELECT 0x02 #define XSV_DRCAPTURE 0x03 #define XSV_DRSHIFT 0x04 #define XSV_DREXIT1 0x05 #define XSV_DRPAUSE 0x06 #define XSV_DREXIT2 0x07 #define XSV_DRUPDATE 0x08 #define XSV_IRSELECT 0x09 #define XSV_IRCAPTURE 0x0A #define XSV_IRSHIFT 0x0B #define XSV_IREXIT1 0x0C #define XSV_IRPAUSE 0x0D #define XSV_IREXIT2 0x0E #define XSV_IRUPDATE 0x0F /* arguments to XTRST */ #define XTRST_ON 0 #define XTRST_OFF 1 #define XTRST_Z 2 #define XTRST_ABSENT 3 #define XSTATE_MAX_PATH 12 static int handle_xsvf_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); static int xsvf_fd = 0; /* map xsvf tap state to an openocd "tap_state_t" */ static tap_state_t xsvf_to_tap( int xsvf_state ) { tap_state_t ret; switch( xsvf_state ) { case XSV_RESET: ret = TAP_RESET; break; case XSV_IDLE: ret = TAP_IDLE; break; case XSV_DRSELECT: ret = TAP_DRSELECT; break; case XSV_DRCAPTURE: ret = TAP_DRCAPTURE; break; case XSV_DRSHIFT: ret = TAP_DRSHIFT; break; case XSV_DREXIT1: ret = TAP_DREXIT1; break; case XSV_DRPAUSE: ret = TAP_DRPAUSE; break; case XSV_DREXIT2: ret = TAP_DREXIT2; break; case XSV_DRUPDATE: ret = TAP_DRUPDATE; break; case XSV_IRSELECT: ret = TAP_IRSELECT; break; case XSV_IRCAPTURE: ret = TAP_IRCAPTURE; break; case XSV_IRSHIFT: ret = TAP_IRSHIFT; break; case XSV_IREXIT1: ret = TAP_IREXIT1; break; case XSV_IRPAUSE: ret = TAP_IRPAUSE; break; case XSV_IREXIT2: ret = TAP_IREXIT2; break; case XSV_IRUPDATE: ret = TAP_IRUPDATE; break; default: LOG_ERROR( "UNKNOWN XSVF STATE 0x%02X", xsvf_state ); exit(1); } return ret; } /* xsvf has it's own definition of a statemove. This needs * to be handled according to the xsvf spec, which has nothing * to do with the JTAG spec or OpenOCD as such. * * Implemented via jtag_add_pathmove(). */ static void xsvf_add_statemove(tap_state_t state) { tap_state_t moves[7]; /* max # of transitions */ tap_state_t curstate = cmd_queue_cur_state; int i; u8 move = tap_get_tms_path(cmd_queue_cur_state, state); if (state != TAP_RESET && state==cmd_queue_cur_state) return; if(state==TAP_RESET) { jtag_add_tlr(); return; } for (i=0; i<7; i++) { int j = (move >> i) & 1; if (j) { curstate = tap_state_transition(curstate, TRUE); } else { curstate = tap_state_transition(curstate, FALSE); } moves[i] = curstate; } jtag_add_pathmove(7, moves); } int xsvf_register_commands(struct command_context_s *cmd_ctx) { register_command(cmd_ctx, NULL, "xsvf", handle_xsvf_command, COMMAND_EXEC, "run xsvf [virt2] [quiet]"); return ERROR_OK; } static int xsvf_read_buffer(int num_bits, int fd, u8* buf) { int num_bytes; for (num_bytes = (num_bits + 7) / 8; num_bytes > 0; num_bytes--) { /* reverse the order of bytes as they are read sequentially from file */ if (read(fd, buf + num_bytes - 1, 1) < 0) return ERROR_XSVF_EOF; } return ERROR_OK; } static int xsvf_read_xstates(int fd, tap_state_t *path, int max_path, int *path_len) { char c; u8 uc; while ((read(fd, &c, 1) > 0) && (c == XSTATE)) { tap_state_t mystate; if (*path_len > max_path) { LOG_WARNING("XSTATE path longer than max_path"); break; } if (read(fd, &uc, 1) < 0) { return ERROR_XSVF_EOF; } mystate = xsvf_to_tap(uc); LOG_DEBUG("XSTATE %02X %s", uc, tap_state_name(mystate) ); path[(*path_len)++] = mystate; } lseek(fd, -1, SEEK_CUR); return ERROR_OK; } static int handle_xsvf_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) { u8 *dr_out_buf = NULL; /* from host to device (TDI) */ u8 *dr_in_buf = NULL; /* from device to host (TDO) */ u8 *dr_in_mask = NULL; int xsdrsize = 0; int xruntest = 0; /* number of TCK cycles OR microseconds */ int xrepeat = 0; /* number of retries */ tap_state_t xendir = TAP_IDLE; /* see page 8 of the SVF spec, initial xendir to be TAP_IDLE */ tap_state_t xenddr = TAP_IDLE; u8 opcode; u8 uc; long file_offset = 0; int loop_count = 0; tap_state_t loop_state = TAP_IDLE; int loop_clocks = 0; int loop_usecs = 0; int do_abort = 0; int unsupported = 0; int tdo_mismatch = 0; int result; int verbose = 1; char* filename; int runtest_requires_tck = 0; /* a flag telling whether to clock TCK during waits, or simply sleep, controled by virt2 */ /* use NULL to indicate a "plain" xsvf file which accounts for additional devices in the scan chain, otherwise the device that should be affected */ jtag_tap_t *tap = NULL; if (argc < 2) { command_print(cmd_ctx, "usage: xsvf [] [quiet]"); return ERROR_FAIL; } filename = args[1]; /* we mess with args starting point below, snapshot filename here */ if (strcmp(args[0], "plain") != 0) { tap = jtag_TapByString( args[0] ); if (!tap ) { command_print( cmd_ctx, "Tap: %s unknown", args[0] ); return ERROR_FAIL; } } if ((xsvf_fd = open(filename, O_RDONLY)) < 0) { command_print(cmd_ctx, "file \"%s\" not found", filename); return ERROR_FAIL; } /* if this argument is present, then interpret xruntest counts as TCK cycles rather than as usecs */ if ((argc > 2) && (strcmp(args[2], "virt2") == 0)) { runtest_requires_tck = 1; --argc; ++args; } if ((argc > 2) && (strcmp(args[2], "quiet") == 0)) { verbose = 0; } LOG_USER("xsvf processing file: \"%s\"", filename); while( read(xsvf_fd, &opcode, 1) > 0 ) { /* record the position of the just read opcode within the file */ file_offset = lseek(xsvf_fd, 0, SEEK_CUR) - 1; switch (opcode) { case XCOMPLETE: LOG_DEBUG("XCOMPLETE"); result = jtag_execute_queue(); if (result != ERROR_OK) { tdo_mismatch = 1; break; } break; case XTDOMASK: LOG_DEBUG("XTDOMASK"); if (dr_in_mask && (xsvf_read_buffer(xsdrsize, xsvf_fd, dr_in_mask) != ERROR_OK)) do_abort = 1; break; case XRUNTEST: { u8 xruntest_buf[4]; if (read(xsvf_fd, xruntest_buf, 4) < 0) { do_abort = 1; break; } xruntest = be_to_h_u32(xruntest_buf); LOG_DEBUG("XRUNTEST %d 0x%08X", xruntest, xruntest); } break; case XREPEAT: { u8 myrepeat; if (read(xsvf_fd, &myrepeat, 1) < 0) do_abort = 1; else { xrepeat = myrepeat; LOG_DEBUG("XREPEAT %d", xrepeat ); } } break; case XSDRSIZE: { u8 xsdrsize_buf[4]; if (read(xsvf_fd, xsdrsize_buf, 4) < 0) { do_abort = 1; break; } xsdrsize = be_to_h_u32(xsdrsize_buf); LOG_DEBUG("XSDRSIZE %d", xsdrsize); if( dr_out_buf ) free(dr_out_buf); if( dr_in_buf) free(dr_in_buf); if( dr_in_mask) free(dr_in_mask); dr_out_buf = malloc((xsdrsize + 7) / 8); dr_in_buf = malloc((xsdrsize + 7) / 8); dr_in_mask = malloc((xsdrsize + 7) / 8); } break; case XSDR: /* these two are identical except for the dr_in_buf */ case XSDRTDO: { int limit = xrepeat; int matched = 0; int attempt; const char* op_name = (opcode == XSDR ? "XSDR" : "XSDRTDO"); if (xsvf_read_buffer(xsdrsize, xsvf_fd, dr_out_buf) != ERROR_OK) { do_abort = 1; break; } if (opcode == XSDRTDO) { if(xsvf_read_buffer(xsdrsize, xsvf_fd, dr_in_buf) != ERROR_OK ) { do_abort = 1; break; } } if (limit < 1) limit = 1; LOG_DEBUG("%s %d", op_name, xsdrsize); for( attempt=0; attempt0 ) { /* perform the XC9500 exception handling sequence shown in xapp067.pdf and illustrated in psuedo code at end of this file. We start from state DRPAUSE: go to Exit2-DR go to Shift-DR go to Exit1-DR go to Update-DR go to Run-Test/Idle This sequence should be harmless for other devices, and it will be skipped entirely if xrepeat is set to zero. */ static tap_state_t exception_path[] = { TAP_DREXIT2, TAP_DRSHIFT, TAP_DREXIT1, TAP_DRUPDATE, TAP_IDLE, }; jtag_add_pathmove( sizeof(exception_path)/sizeof(exception_path[0]), exception_path); if (verbose) LOG_USER("%s %d retry %d", op_name, xsdrsize, attempt); } field.tap = tap; field.num_bits = xsdrsize; field.out_value = dr_out_buf; field.out_mask = NULL; field.in_value = NULL; jtag_set_check_value(&field, dr_in_buf, dr_in_mask, NULL); if (tap == NULL) jtag_add_plain_dr_scan(1, &field, TAP_DRPAUSE); else jtag_add_dr_scan(1, &field, TAP_DRPAUSE); /* LOG_DEBUG("FLUSHING QUEUE"); */ result = jtag_execute_queue(); if (result == ERROR_OK) { matched = 1; break; } } if (!matched) { LOG_USER( "%s mismatch", op_name); tdo_mismatch = 1; break; } /* See page 19 of XSVF spec regarding opcode "XSDR" */ if (xruntest) { xsvf_add_statemove(TAP_IDLE); if (runtest_requires_tck) jtag_add_clocks(xruntest); else jtag_add_sleep(xruntest); } else if (xendir != TAP_DRPAUSE) /* we are already in TAP_DRPAUSE */ xsvf_add_statemove(xenddr); } break; case XSETSDRMASKS: LOG_ERROR("unsupported XSETSDRMASKS\n"); unsupported = 1; break; case XSDRINC: LOG_ERROR("unsupported XSDRINC\n"); unsupported = 1; break; case XSDRB: LOG_ERROR("unsupported XSDRB\n"); unsupported = 1; break; case XSDRC: LOG_ERROR("unsupported XSDRC\n"); unsupported = 1; break; case XSDRE: LOG_ERROR("unsupported XSDRE\n"); unsupported = 1; break; case XSDRTDOB: LOG_ERROR("unsupported XSDRTDOB\n"); unsupported = 1; break; case XSDRTDOC: LOG_ERROR("unsupported XSDRTDOC\n"); unsupported = 1; break; case XSDRTDOE: LOG_ERROR("unsupported XSDRTDOE\n"); unsupported = 1; break; case XSTATE: { tap_state_t mystate; tap_state_t *path; int path_len; if (read(xsvf_fd, &uc, 1) < 0) { do_abort = 1; break; } mystate = xsvf_to_tap(uc); LOG_DEBUG("XSTATE 0x%02X %s", uc, tap_state_name(mystate) ); path = calloc(XSTATE_MAX_PATH, 4); path_len = 1; path[0] = mystate; if (xsvf_read_xstates(xsvf_fd, path, XSTATE_MAX_PATH, &path_len) != ERROR_OK) do_abort = 1; else { int i,lasti; /* here the trick is that jtag_add_pathmove() must end in a stable * state, so we must only invoke jtag_add_tlr() when we absolutely * have to */ for(i=0,lasti=0; ilasti) { jtag_add_pathmove(i-lasti,path+lasti); } lasti=i+1; jtag_add_tlr(); } } if(i>=lasti) { jtag_add_pathmove(i-lasti, path+lasti); } } free(path); } break; case XENDIR: { tap_state_t mystate; if (read(xsvf_fd, &uc, 1) < 0) { do_abort = 1; break; } /* see page 22 of XSVF spec */ mystate = uc == 1 ? TAP_IRPAUSE : TAP_IDLE; LOG_DEBUG("XENDIR 0x%02X %s", uc, tap_state_name(mystate)); /* assuming that the XRUNTEST comes from SVF RUNTEST, then only these states * should come here because the SVF spec only allows these with a RUNTEST */ if (mystate != TAP_IRPAUSE && mystate != TAP_DRPAUSE && mystate != TAP_RESET && mystate != TAP_IDLE ) { LOG_ERROR("illegal XENDIR endstate: \"%s\"", tap_state_name(mystate)); unsupported = 1; break; } xendir = mystate; } break; case XENDDR: { tap_state_t mystate; if (read(xsvf_fd, &uc, 1) < 0) { do_abort = 1; break; } /* see page 22 of XSVF spec */ mystate = uc == 1 ? TAP_DRPAUSE : TAP_IDLE; LOG_DEBUG("XENDDR %02X %s", uc, tap_state_name(mystate)); if (mystate != TAP_IRPAUSE && mystate != TAP_DRPAUSE && mystate != TAP_RESET && mystate != TAP_IDLE ) { LOG_ERROR("illegal XENDDR endstate: \"%s\"", tap_state_name( mystate )); unsupported = 1; break; } xenddr = mystate; } break; case XSIR: case XSIR2: { u8 short_buf[2]; u8* ir_buf; int bitcount; tap_state_t my_end_state = xruntest ? TAP_IDLE : xendir; if( opcode == XSIR ) { /* one byte bitcount */ if (read(xsvf_fd, short_buf, 1) < 0) { do_abort = 1; break; } bitcount = short_buf[0]; LOG_DEBUG("XSIR %d", bitcount); } else { if (read(xsvf_fd, short_buf, 2) < 0) { do_abort = 1; break; } bitcount = be_to_h_u16(short_buf); LOG_DEBUG("XSIR2 %d", bitcount); } ir_buf = malloc((bitcount+7) / 8); if (xsvf_read_buffer(bitcount, xsvf_fd, ir_buf) != ERROR_OK) do_abort = 1; else { scan_field_t field; field.tap = tap; field.num_bits = bitcount; field.out_value = ir_buf; field.out_mask = NULL; field.in_value = NULL; field.in_check_value = NULL; field.in_check_mask = NULL; field.in_handler = NULL; field.in_handler_priv = NULL; if (tap == NULL) jtag_add_plain_ir_scan(1, &field, my_end_state); else jtag_add_ir_scan(1, &field, my_end_state); if (xruntest) { if (runtest_requires_tck) jtag_add_clocks(xruntest); else jtag_add_sleep(xruntest); } /* Note that an -irmask of non-zero in your config file * can cause this to fail. Setting -irmask to zero cand work * around the problem. */ /* LOG_DEBUG("FLUSHING QUEUE"); */ result = jtag_execute_queue(); if(result != ERROR_OK) { tdo_mismatch = 1; } } free(ir_buf); } break; case XCOMMENT: { int ndx = 0; char comment[128]; do { if (read(xsvf_fd, &uc, 1) < 0) { do_abort = 1; break; } if ( ndx < sizeof(comment)-1 ) comment[ndx++] = uc; } while (uc != 0); comment[sizeof(comment)-1] = 0; /* regardless, terminate */ if (verbose) LOG_USER(comment); } break; case XWAIT: { /* expected in stream: XWAIT */ u8 wait; u8 end; u8 delay_buf[4]; tap_state_t wait_state; tap_state_t end_state; int delay; if ( read(xsvf_fd, &wait, 1) < 0 || read(xsvf_fd, &end, 1) < 0 || read(xsvf_fd, delay_buf, 4) < 0) { do_abort = 1; break; } wait_state = xsvf_to_tap(wait); end_state = xsvf_to_tap(end); delay = be_to_h_u32(delay_buf); LOG_DEBUG("XWAIT %s %s usecs:%d", tap_state_name(wait_state), tap_state_name(end_state), delay); if (runtest_requires_tck && wait_state == TAP_IDLE ) { jtag_add_runtest(delay, end_state); } else { xsvf_add_statemove( wait_state ); jtag_add_sleep(delay); xsvf_add_statemove( end_state ); } } break; case XWAITSTATE: { /* expected in stream: XWAITSTATE */ u8 clock_buf[4]; u8 usecs_buf[4]; u8 wait; u8 end; tap_state_t wait_state; tap_state_t end_state; int clock_count; int usecs; if ( read(xsvf_fd, &wait, 1) < 0 || read(xsvf_fd, &end, 1) < 0 || read(xsvf_fd, clock_buf, 4) < 0 || read(xsvf_fd, usecs_buf, 4) < 0 ) { do_abort = 1; break; } wait_state = xsvf_to_tap( wait ); end_state = xsvf_to_tap( end ); clock_count = be_to_h_u32(clock_buf); usecs = be_to_h_u32(usecs_buf); LOG_DEBUG("XWAITSTATE %s %s clocks:%i usecs:%i", tap_state_name(wait_state), tap_state_name(end_state), clock_count, usecs); /* the following states are 'stable', meaning that they have a transition * in the state diagram back to themselves. This is necessary because we will * be issuing a number of clocks in this state. This set of allowed states is also * determined by the SVF RUNTEST command's allowed states. */ if (wait_state != TAP_IRPAUSE && wait_state != TAP_DRPAUSE && wait_state != TAP_RESET && wait_state != TAP_IDLE) { LOG_ERROR("illegal XWAITSTATE wait_state: \"%s\"", tap_state_name( wait_state )); unsupported = 1; } xsvf_add_statemove( wait_state ); jtag_add_clocks( clock_count ); jtag_add_sleep( usecs ); xsvf_add_statemove( end_state ); } break; case LCOUNT: { /* expected in stream: LCOUNT */ u8 count_buf[4]; if ( read(xsvf_fd, count_buf, 4) < 0 ) { do_abort = 1; break; } loop_count = be_to_h_u32(count_buf); LOG_DEBUG("LCOUNT %d", loop_count); } break; case LDELAY: { /* expected in stream: LDELAY */ u8 state; u8 clock_buf[4]; u8 usecs_buf[4]; if ( read(xsvf_fd, &state, 1) < 0 || read(xsvf_fd, clock_buf, 4) < 0 || read(xsvf_fd, usecs_buf, 4) < 0 ) { do_abort = 1; break; } loop_state = xsvf_to_tap(state); loop_clocks = be_to_h_u32(clock_buf); loop_usecs = be_to_h_u32(usecs_buf); LOG_DEBUG("LDELAY %s clocks:%d usecs:%d", tap_state_name(loop_state), loop_clocks, loop_usecs); } break; /* LSDR is more like XSDRTDO than it is like XSDR. It uses LDELAY which * comes with clocks !AND! sleep requirements. */ case LSDR: { int limit = loop_count; int matched = 0; int attempt; LOG_DEBUG("LSDR"); if ( xsvf_read_buffer(xsdrsize, xsvf_fd, dr_out_buf) != ERROR_OK || xsvf_read_buffer(xsdrsize, xsvf_fd, dr_in_buf) != ERROR_OK ) { do_abort = 1; break; } if (limit < 1) limit = 1; for( attempt=0; attempt 0 && verbose) LOG_USER("LSDR retry %d", attempt); jtag_set_check_value(&field, dr_in_buf, dr_in_mask, NULL); if (tap == NULL) jtag_add_plain_dr_scan(1, &field, TAP_DRPAUSE); else jtag_add_dr_scan(1, &field, TAP_DRPAUSE); /* LOG_DEBUG("FLUSHING QUEUE"); */ result = jtag_execute_queue(); if(result == ERROR_OK) { matched = 1; break; } } if (!matched ) { LOG_USER( "LSDR mismatch" ); tdo_mismatch = 1; break; } } break; case XTRST: { u8 trst_mode; if (read(xsvf_fd, &trst_mode, 1) < 0) { do_abort = 1; break; } switch( trst_mode ) { case XTRST_ON: jtag_add_reset(1, 0); break; case XTRST_OFF: case XTRST_Z: jtag_add_reset(0, 0); break; case XTRST_ABSENT: break; default: LOG_ERROR( "XTRST mode argument (0x%02X) out of range", trst_mode ); do_abort = 1; } } break; default: LOG_ERROR("unknown xsvf command (0x%02X)\n", uc); unsupported = 1; } if (do_abort || unsupported || tdo_mismatch) { LOG_DEBUG("xsvf failed, setting taps to reasonable state"); /* upon error, return the TAPs to a reasonable state */ xsvf_add_statemove( TAP_IDLE ); jtag_execute_queue(); break; } } if (tdo_mismatch) { command_print(cmd_ctx, "TDO mismatch, somewhere near offset %lu in xsvf file, aborting", file_offset ); return ERROR_FAIL; } if (unsupported) { command_print(cmd_ctx, "unsupported xsvf command: 0x%02X in xsvf file at offset %ld, aborting", uc, lseek(xsvf_fd, 0, SEEK_CUR)-1 ); return ERROR_FAIL; } if (do_abort) { command_print(cmd_ctx, "premature end of xsvf file detected, aborting"); return ERROR_FAIL; } if (dr_out_buf) free(dr_out_buf); if (dr_in_buf) free(dr_in_buf); if (dr_in_mask) free(dr_in_mask); close(xsvf_fd); command_print(cmd_ctx, "XSVF file programmed successfully"); return ERROR_OK; } /* PSUEDO-Code from Xilinx Appnote XAPP067.pdf: the following pseudo code clarifies the intent of the xrepeat support. The flow given is for the entire processing of an SVF file, not an XSVF file. No idea if this is just for the XC9500/XL/XV devices or all Xilinx parts. "Pseudo-Code Algorithm for SVF-Based ISP" 1. Go to Test-Logic-Reset state 2. Go to Run-Test Idle state 3. Read SVF record 4. if SIR record then go to Shift-IR state Scan in 5. else if SDR record then set to 0 store as store as 6. go to Shift-DR state scan in if is specified then if does not equal then if > 32 then LOG ERROR go to Run-Test Idle state go to Step 3 end if go to Pause-DR go to Exit2-DR go to Shift-DR go to Exit1-DR go to Update-DR go to Run-Test/Idle increment by 1 pause microseconds go to Step 6) end if else go to Run-Test Idle state go to Step 3 endif else if RUNTEST record then pause tester for microseconds store as end if */ d='n660' href='#n660'>660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657