################################################################################ # Atmel AT91SAM9260-EK eval board # # http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933 # # Atmel AT91SAM9260 : PLLA = 198.656 MHz, MCK = 99.328 MHz # OSCSEL configured for external 32.768 kHz crystal # # 32-bit SDRAM : 2 x Micron MT48LC16M16A2, 4M x 16Bit x 4 Banks # ################################################################################ # We add to the minimal configuration. source [find target/at91sam9260.cfg] # By default S1 is open and this means that NTRST is not connected. # The reset_config in target/at91sam9260.cfg is overridden here. # (or S1 must be populated with a 0 Ohm resistor) reset_config srst_only $_TARGETNAME configure -event reset-start { # At reset CPU runs at 32.768 kHz. # JTAG Frequency must be 6 times slower if RCLK is not supported. jtag_rclk 5 halt # RSTC_MR : enable user reset, MMU may be enabled... use physical address mww phys 0xfffffd08 0xa5000501 } $_TARGETNAME configure -event reset-init { mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator sleep 20 ;# wait 20 ms mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator sleep 10 ;# wait 10 ms mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR: Set PLLA Register for 198.656 MHz sleep 20 ;# wait 20 ms mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler (divide by 2) sleep 10 ;# wait 10 ms mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected (99.328 MHz) sleep 10 ;# wait 10 ms # Increase JTAG Speed to 6 MHz if RCLK is not supported jtag_rclk 6000 arm7_9 dcc_downloads enable ;# Enable faster DCC downloads mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral function for D15..D31 mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31 mww 0xffffef1c 0x00010002 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks) mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command mww 0x20000000 0 mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command mww 0x20000000 0 mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' Command mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command mww 0x20000000 0 mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode mww 0x20000000 0 mww 0xffffea04 0x2b6 ;# SDRAMC_TR : Set refresh timer count to 7us } ef='/git/2012/05/openembedded-core.git/tree/meta/packages/patch/patch-2.5.9?id=f751a20152c651a33f08ceda0502fa1d4f11c005'>patch-2.5.9/2.5.9.patch