OpenOCD smoketest results

These tests can be performed on any JTAG device as long as they are executed using the unmodified code from git.

The latest version in which the test is known to have passed is in the table below.

Vocabulary

Passed version The latest branch and version on which the test is known to pass
Broken version The latest branch and version on which the test is known to fail. n/a when older than passed version.
ID A unqiue ID to refer to a test. The unique numbers are maintained in this file. Note that the same test can be run on different hardware/interface. Each combination yields a unique id.

Unique ID Synopsis JTAG device Passed version Broken version
fill_malloc Fill malloc() memory with garbage n/a n/a n/a
ocd1 Telnet Windows n/a n/a n/a
ocd2 Telnet Linux n/a n/a n/a
ocd3 Telnet Cygwin n/a n/a n/a
ocd4 ARM7 debugging n/a n/a n/a
SAM9260 SAM9260 debugging ft2232 500 n/a
xscale1 XScale debugging bitbang 505 n/a
xscale2 XScale debugging FT2232 202 n/a
bdte-ram1 str710 ram debugging JTAGkey 657 n/a
bdte-rom2 str710 rom debugging JTAGkey 657 n/a
bdte-ram3 str912 ram debugging JTAGkey 657 n/a
bdte-rom4 str912 rom debugging JTAGkey 657 n/a
bdte-ram5 lpc2148 ram debugging JTAGkey 657 n/a
bdte-rom6 lpc2148 rom debugging JTAGkey 657 n/a
bdte-ram7 lpc2294 ram debugging JTAGkey 657 n/a
bdte-rom8 lpc2294 rom debugging JTAGkey 657 n/a
bdte-ram9 sam7s256 ram debugging JTAGkey 657 n/a
bdte-rom10 sam7s256 rom debugging JTAGkey 657 n/a
bdte-ram11 sam7x256 ram debugging JTAGkey 657 n/a
bdte-rom12 sam7x256 rom debugging JTAGkey 657 n/a
bdte-ram13 at91r40008 ram debugging JTAGkey 657 n/a

OpenOCD JTAG device test results

Each JTAG device must be tested
ID Synopsis Passed version Broken version
jtag1 Parport n/a n/a
jtag2 JTAGkey 657 n/a
jtag3 Turtelizer2 657 n/a
jtag4 JTAGkey 657 n/a
jtag5 add new one n/a n/a

jtag1:

jtag2: Tested on Windows XP Prof. (SP2) with original FTDI driver.

jtag3: Tested on Windows XP Prof. (SP2) with original FTDI driver.

jtag4: Tested on Mac OS X (10.5.2, Intel) with libftdi-0.10 and libusb-0.1.12

jtag5:

OpenOCD JTAG device speed test result

The test result is in KB/sec.

ID Synopsis r320 r420 r423 r459 r517 r536 r651 r657
speed1 JTAGkey 93 64 93 93 93 93 162 165
speed2 JTAGkey n/a n/a n/a n/a 52 52 110 111
speed3 add new one n/a n/a n/a n/a n/a n/a n/a n/a

Policy on removing features from OpenOCD

If a feature in OpenOCD is known to be broken and nobody has submitted a fix and the feature is causing trouble for maintainence, it can be removed from OpenOCD mainline. The threshold for temporarily removing something from OpenOCD mainline is low to ease maintainence and place the burden of maintainence on those that care about a feature.

Note that code is never deleted from OpenOCD git, it remains in the repository so if somebody sees a feature removed that they would like kept, they have but to port and fix that feature back up to main mainline. This document can be helpful in this regard in that the latest working version and the known broken version may be listed.

Policy on adding features from OpenOCD

To add a feature to OpenOCD, generally it should not break any existing features and it should be functional and the code reasonably readable and useful to others in the OpenOCD community. The code does not have to be completed. Work in progress is fine for OpenOCD mainline.

Also new tests should be defined. Note that the code does not have to pass all the tests. In fact it can be helpful to have tests to describe facets that really should be working, but aren't done yet.

ocd4 - ARM7 debugging

Connect to ARM7 device(any), use GDB load to load a program into RAM and single halt, resume and single step.

bdte-ram (Basic debugging test with Eclipse in RAM)

This test was made under Eclipse with the Zylin Embedded CDT plugin. For the GDB "Initialize commands" take a look in the examples/<target>/prj/eclipse_ram.gdb file.

Start debugging, the debugger should stop at main. set some breakpoints and "Resume". If the debugger hit a breakpoint check if the "Variables" looks correct. Remove some breakpoints and "Resume" again. If the target is running, use the "Suspend" function and use "Step Into" or "Step Over" through the source. Even open the "Disassembly" view and enable the "Instruction Stepping Mode". Now you can single step through the assembler source. Use "Resume" again to run the program, set a breakpoint while the target is running. Check if you can inspect the variables with the mouse over. Play a little with the target...

bdte-rom (Basic debugging test with Eclipse in ROM)

This test was made under Eclipse with the Zylin Embedded CDT plugin. For the GDB "Initialize commands" take a look in the examples/<target>/prj/eclipse_rom.gdb file.

Start debugging, the debugger should download and store the program in the flash of the target.

Now you can make some tests like described in the bdte-ram section above too.

speed1 - Download speed test

For this test a STR710 with external memory was used. The example project can be found under examples/STR710JtagSpeed. Here Eclipse or the arm-elf-gdb can be used to download the test.elf file into the RAM. The result of the GDB can look like:

Loading section .text, size 0x6019c lma 0x62000000
Start address 0x62000040, load size 393628
Transfer rate: 93 KB/sec, 2008 bytes/write.

In this example a speed of 93 KB/sec was reached. The hardware which was used for the test can be found here.

The test was made on Windows XP Prof. (SP2) with a JTAGkey and the original FTDI driver.

speed2 - Download speed test

For this test a STR710 with external memory was used. The example project can be found under examples/STR710JtagSpeed. Here Eclipse or the arm-elf-gdb can be used to download the test.elf file into the RAM. The result of the GDB can look like:

Loading section .text, size 0x6019c lma 0x62000000
Start address 0x62000040, load size 393628
Transfer rate: 52 KB/sec, 2008 bytes/write.

In this example a speed of 52 KB/sec was reached. The hardware which was used for the test can be found here.

The test was made on Mac OS X (10.5.2, Intel) with a JTAGkey and the following driver:

- libftdi 0.10
- libusb 0.1.12