openocd_libswd.git/doc, branch master

cortex a : smp doc update

2011-05-09T19:50:44Z

Added s19 to (fast_)load_image documentation to match the online help.

2011-04-01T07:02:03Z

jlink: add Emulator configuration support

2011-03-13T13:55:20Z

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez

jlink: add capability dumper and command

2011-03-13T13:54:32Z

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez

jlink: add jlink_pid to specify the pid to use

2011-03-02T18:04:16Z

this will allow us to use multiple jlink at the same time as when the USB-Address is specified the PID change from 0x0101 to (0x101 + usb_adress) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

jlink: switch commands to subcommands

2011-03-02T18:04:00Z

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

openocd.texi: minor fixes in Reset Configuration

2011-01-31T07:46:16Z

Signed-off-by: Aaron Carroll

initial SWD transport (SWD infrastructure #2)

2010-12-25T02:50:41Z

This piggy backs on JTAG so it's not yet pretty, but that seems unavoidable so far given today's OpenOCD internals. SWD init and data transfer are unfinished and untested, but that should cause no regressions, and will be addressed by the time drivers start using this infrastructure. Checking in whould get the code working better sooner, and turn up any structural/architectural issues while they're easier to fix. The debug adapter drivers will provide simple SWD driver structs with methods that kick in as needed (instead of JTAG). So far just one adapter driver has been updated (not yet ready to use or circulate). The biggest issues are probably - fault handling, where the ARM Debug Interface V5 pipelining needs work in both JTAG and SWD modes and - missing rewrite of block I/O code to work on both of our Cortex-ready transports (Current code is hard-wired to JTAG); relates also to the pipelining issue. - omitted support to activate/deactivate SWO/SWV trace (this is technically trivial, but configuring what to trace is NOT. Signed-off-by: David Brownell ---- doc/openocd.texi | 17 ++ src/jtag/core.c | 3 src/jtag/interface.h | 4 src/jtag/jtag.h | 2 src/jtag/swd.h | 114 +++++++++++++++++++ src/jtag/tcl.c | 2 src/target/adi_v5_swd.c | 281 ++++++++++++++++++++++++++++++++++++++++++++++-- src/target/arm_adi_v5.c | 8 + src/target/arm_adi_v5.h | 3 9 files changed, 425 insertions(+), 9 deletions(-)

openocd doc: update the comments about Jim Tcl a bit

2010-12-16T08:12:46Z

Signed-off-by: Øyvind Harboe

FLASH/NOR: rename from spearsmi to stmsmi

2010-11-23T07:37:34Z

STMicroelectronics controller SMI is not SPEAr specific. Rename it and change name to every symbol in the code. Signed-off-by: Antonio Borneo