diff options
author | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-27 06:44:43 +0000 |
---|---|---|
committer | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-27 06:44:43 +0000 |
commit | 140d6c8e7948710a764965075bfaa700efd09802 (patch) | |
tree | ccb281820c12961eb036d2a00040164d114ad057 /src/tcl/target/aduc702x.cfg | |
parent | 7c0e823d0a57df99adc5b1b7975406bfd9e0d9fb (diff) | |
download | openocd_libswd-140d6c8e7948710a764965075bfaa700efd09802.tar.gz openocd_libswd-140d6c8e7948710a764965075bfaa700efd09802.tar.bz2 openocd_libswd-140d6c8e7948710a764965075bfaa700efd09802.tar.xz openocd_libswd-140d6c8e7948710a764965075bfaa700efd09802.zip |
Move TCL script files -- Step 1 of 2:
- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
- Add dist-hook to include such files under src/tcl in the distribution.
- Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
- Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'src/tcl/target/aduc702x.cfg')
-rw-r--r-- | src/tcl/target/aduc702x.cfg | 61 |
1 files changed, 61 insertions, 0 deletions
diff --git a/src/tcl/target/aduc702x.cfg b/src/tcl/target/aduc702x.cfg new file mode 100644 index 00000000..ef1beb78 --- /dev/null +++ b/src/tcl/target/aduc702x.cfg @@ -0,0 +1,61 @@ +## -*- tcl -*- +## + + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME s3c2410 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # This config file was defaulting to big endian.. + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0xffffffff +} + + +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + +# This is for the case that TRST/SRST is not wired on your JTAG adaptor. +# Don't really need them anyways. +reset_config none + +## JTAG scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +## +## Target configuration +## +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME + +# allocate the entire SRAM as working area +$_TARGETNAME configure -work-area-phys 0x10000 -work-area-size 0x2000 + +## flash configuration +# only target number is needed +flash bank aduc702x 0 0 0 0 0 + +## If you use the watchdog, the following code makes sure that the board +## doesn't reboot when halted via JTAG. Yes, on the older generation +## AdUC702x, timer3 continues running even when the CPU is halted. + +proc watchdog_service {} { + global watchdog_hdl + mww 0xffff036c 0 +# puts "watchdog!!" + set watchdog_hdl [after 500 watchdog_service] +} + +$_TARGETNAME configure -event reset-halt-post { watchdog_service } +$_TARGETNAME configure -event old-pre_resume { global watchdog_hdl; after cancel $watchdog_hdl } |