diff options
-rw-r--r-- | src/flash/arm_nandio.c | 91 | ||||
-rw-r--r-- | src/flash/arm_nandio.h | 1 |
2 files changed, 91 insertions, 1 deletions
diff --git a/src/flash/arm_nandio.c b/src/flash/arm_nandio.c index 81697fa5..20a76f43 100644 --- a/src/flash/arm_nandio.c +++ b/src/flash/arm_nandio.c @@ -131,5 +131,94 @@ int arm_nandwrite(struct arm_nand_data *nand, uint8_t *data, int size) return retval; } -/* REVISIT do the same for bulk *read* too ... */ +/** + * Uses an on-chip algorithm for an ARM device to read from a NAND device and + * store the data into the host machine's memory. + * + * @param nand Pointer to the arm_nand_data struct that defines the I/O + * @param data Pointer to the data buffer to store the read data + * @param size Amount of data to be stored to the buffer. + */ +int arm_nandread(struct arm_nand_data *nand, uint8_t *data, uint32_t size) { + struct target *target = nand->target; + struct armv4_5_algorithm algo; + struct arm *armv4_5 = target->arch_info; + struct reg_param reg_params[3]; + uint32_t target_buf; + uint32_t exit = 0; + int retval; + + /* Inputs: + * r0 buffer address + * r1 NAND data address (byte wide) + * r2 buffer length + */ + static const uint32_t code[] = { + 0xe5d13000, /* s: ldrb r3, [r1] */ + 0xe4c03001, /* strb r3, [r0], #1 */ + 0xe2522001, /* subs r2, r2, #1 */ + 0x1afffffb, /* bne s */ + + /* exit: ARMv4 needs hardware breakpoint */ + 0xe1200070, /* e: bkpt #0 */ + }; + + /* create the copy area if not yet available */ + if (!nand->copy_area) { + uint8_t code_buf[sizeof(code)]; + unsigned i; + + /* make sure we have a working area */ + retval = target_alloc_working_area(target, sizeof(code) + nand->chunk_size, &nand->copy_area); + if (retval != ERROR_OK) { + LOG_DEBUG("%s: no %d byte buffer", __FUNCTION__, (int) sizeof(code) + nand->chunk_size); + return ERROR_NAND_NO_BUFFER; + } + + /* buffer code in target endianness */ + for (i = 0; i < sizeof(code) / 4; i++) { + target_buffer_set_u32(target, code_buf + i * 4, code[i]); + } + + /* copy code to work area */ + retval = target_write_memory(target, nand->copy_area->address, 4, sizeof(code) / 4, code_buf); + if (retval != ERROR_OK) { + return retval; + } + } + + target_buf = nand->copy_area->address + sizeof(code); + + /* set up algorithm and parameters */ + algo.common_magic = ARMV4_5_COMMON_MAGIC; + algo.core_mode = ARMV4_5_MODE_SVC; + algo.core_state = ARMV4_5_STATE_ARM; + + init_reg_param(®_params[0], "r0", 32, PARAM_IN); + init_reg_param(®_params[1], "r1", 32, PARAM_IN); + init_reg_param(®_params[2], "r2", 32, PARAM_IN); + + buf_set_u32(reg_params[0].value, 0, 32, target_buf); + buf_set_u32(reg_params[1].value, 0, 32, nand->data); + buf_set_u32(reg_params[2].value, 0, 32, size); + + /* armv4 must exit using a hardware breakpoint */ + if (armv4_5->is_armv4) + exit = nand->copy_area->address + sizeof(code) - 4; + + /* use alg to write data from NAND chip to work area */ + retval = target_run_algorithm(target, 0, NULL, 3, reg_params, + nand->copy_area->address, exit, 1000, &algo); + if (retval != ERROR_OK) + LOG_ERROR("error executing hosted NAND write"); + + destroy_reg_param(®_params[0]); + destroy_reg_param(®_params[1]); + destroy_reg_param(®_params[2]); + + /* read from work area to the host's memory */ + retval = target_read_buffer(target, target_buf, size, data); + + return retval; +} diff --git a/src/flash/arm_nandio.h b/src/flash/arm_nandio.h index a1bed326..fbe1f887 100644 --- a/src/flash/arm_nandio.h +++ b/src/flash/arm_nandio.h @@ -21,5 +21,6 @@ struct arm_nand_data { }; int arm_nandwrite(struct arm_nand_data *nand, uint8_t *data, int size); +int arm_nandread(struct arm_nand_data *nand, uint8_t *data, uint32_t size); #endif /* __ARM_NANDIO_H */ |