summaryrefslogtreecommitdiff
path: root/doc/openocd.texi
diff options
context:
space:
mode:
Diffstat (limited to 'doc/openocd.texi')
-rw-r--r--doc/openocd.texi8
1 files changed, 6 insertions, 2 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 2767d787..0253dc0d 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -3540,7 +3540,7 @@ board by (re)installing working boot firmware.
@section Flash Configuration Commands
@cindex flash configuration
-@deffn {Config Command} {flash bank} driver base size chip_width bus_width target [driver_options]
+@deffn {Config Command} {flash bank} name driver base size chip_width bus_width target [driver_options]
Configures a flash bank which provides persistent storage
for addresses from @math{base} to @math{base + size - 1}.
These banks will often be visible to GDB through the target's memory map.
@@ -3548,6 +3548,8 @@ In some cases, configuring a flash bank will activate extra commands;
see the driver-specific documentation.
@itemize @bullet
+@item @var{name} ... may be used to reference the flash bank
+in other flash commands.
@item @var{driver} ... identifies the controller driver
associated with the flash bank being declared.
This is usually @code{cfi} for external flash, or else
@@ -4456,7 +4458,7 @@ NAND chips must be declared in configuration scripts,
plus some additional configuration that's done after
OpenOCD has initialized.
-@deffn {Config Command} {nand device} controller target [configparams...]
+@deffn {Config Command} {nand device} name controller target [configparams...]
Declares a NAND device, which can be read and written to
after it has been configured through @command{nand probe}.
In OpenOCD, devices are single chips; this is unlike some
@@ -4470,6 +4472,8 @@ initialization has completed. Use it in board specific
configuration files, not interactively.
@itemize @bullet
+@item @var{name} ... may be used to reference the NAND bank
+in other commands.
@item @var{controller} ... identifies the controller driver
associated with the NAND device being declared.
@xref{NAND Driver List}.