diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 49df1590..d311c8ee 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -21,7 +21,7 @@ of the Open On-Chip Debugger (OpenOCD). @itemize @bullet @item Copyright @copyright{} 2008 The OpenOCD Project @item Copyright @copyright{} 2007-2008 Spencer Oliver @email{spen@@spen-soft.co.uk} -@item Copyright @copyright{} 2008 Oyvind Harboe @email{oyvind.harboe@@zylin.com} +@item Copyright @copyright{} 2008-2010 Oyvind Harboe @email{oyvind.harboe@@zylin.com} @item Copyright @copyright{} 2008 Duane Ellis @email{openocd@@duaneellis.com} @item Copyright @copyright{} 2009-2010 David Brownell @end itemize @@ -4043,7 +4043,7 @@ specifies "to the end of the flash bank". The @var{num} parameter is a value shown by @command{flash banks}. @end deffn -@deffn Command {flash erase_address} [@option{pad}] address length +@deffn Command {flash erase_address} [@option{pad}] [@option{unlock}] address length Erase sectors starting at @var{address} for @var{length} bytes. Unless @option{pad} is specified, @math{address} must begin a flash sector, and @math{address + length - 1} must end a sector. @@ -4053,6 +4053,8 @@ The flash bank to use is inferred from the @var{address}, and the specified length must stay within that bank. As a special case, when @var{length} is zero and @var{address} is the start of the bank, the whole flash is erased. +If @option{unlock} is specified, then the flash is unprotected +before erase starts. @end deffn @deffn Command {flash fillw} address word length |