diff options
Diffstat (limited to 'src/tcl/board/hitex_str9-comstick.cfg')
| -rw-r--r-- | src/tcl/board/hitex_str9-comstick.cfg | 72 |
1 files changed, 0 insertions, 72 deletions
diff --git a/src/tcl/board/hitex_str9-comstick.cfg b/src/tcl/board/hitex_str9-comstick.cfg deleted file mode 100644 index de4d56dd..00000000 --- a/src/tcl/board/hitex_str9-comstick.cfg +++ /dev/null @@ -1,72 +0,0 @@ -# Hitex STR9-comStick -# http://www.hitex.com/index.php?id=383 -# This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2. - -source [find interface/hitex_str9-comstick.cfg] - -# set jtag speed -jtag_khz 3000 - -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config trst_and_srst -#jtag scan chain -#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME str912 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists FLASHTAPID ] } { - set _FLASHTAPID $FLASHTAPID -} else { - set _FLASHTAPID 0x04570041 -} -jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x25966041 -} -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -if { [info exists BSTAPID ] } { - set _BSTAPID $BSTAPID -} else { - # Found on STR9-comStick, revision STR912CS-A1 - set _BSTAPID1 0x1457f041 - # Found on STR9-comStick, revision STR912CS-A2 - set _BSTAPID2 0x2457f041 -} -jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 - -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e - -$_TARGETNAME configure -event reset-init { - # We can increase speed now that we know the target is halted. - #jtag_rclk 3000 - - # -- Enable 96K RAM - # PFQBC enabled / DTCM & AHB wait-states disabled - mww 0x5C002034 0x0191 - - str9x flash_config 0 4 2 0 0x80000 - flash protect 0 0 7 off -} - -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 - -#flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank str9x 0x00000000 0x00080000 0 0 0 -flash bank str9x 0x00080000 0x00008000 0 0 0 |