diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/target/embeddedice.c | 153 |
1 files changed, 101 insertions, 52 deletions
diff --git a/src/target/embeddedice.c b/src/target/embeddedice.c index faeef38d..4801cf70 100644 --- a/src/target/embeddedice.c +++ b/src/target/embeddedice.c @@ -31,15 +31,21 @@ #define ARRAY_SIZE(x) ((int)(sizeof(x)/sizeof((x)[0]))) -#if 0 -static bitfield_desc_t embeddedice_comms_ctrl_bitfield_desc[] = -{ - {"R", 1}, - {"W", 1}, - {"reserved", 26}, - {"version", 4} -}; -#endif +/** + * @file + * + * This provides lowlevel glue to the EmbeddedICE (or EmbeddedICE-RT) + * module found on scan chain 2 in ARM7, ARM9, and some other families + * of ARM cores. + * + * EmbeddedICE provides basic watchpoint/breakpoint hardware and a Debug + * Communications Channel (DCC) used to read or write 32-bit words to + * OpenOCD-aware code running on the target CPU. + * Newer modules also include vector catch hardware. Some versions + * support hardware single-stepping, "monitor mode" debug (which is not + * currently supported by OpenOCD), or extended reporting on why the + * core entered debug mode. + */ /* * From: ARM9E-S TRM, DDI 0165, table C-4 (and similar, for other cores) @@ -140,9 +146,25 @@ static const struct { static int embeddedice_reg_arch_type = -1; -static int embeddedice_get_reg(reg_t *reg); +static int embeddedice_get_reg(reg_t *reg) +{ + int retval; + + if ((retval = embeddedice_read_reg(reg)) != ERROR_OK) + LOG_ERROR("error queueing EmbeddedICE register read"); + else if ((retval = jtag_execute_queue()) != ERROR_OK) + LOG_ERROR("EmbeddedICE register read failed"); + + return retval; +} -reg_cache_t* embeddedice_build_reg_cache(target_t *target, arm7_9_common_t *arm7_9) +/** + * Probe EmbeddedICE module and set up local records of its registers. + * Different versions of the modules have different capabilities, such as + * hardware support for vector_catch, single stepping, and monitor mode. + */ +reg_cache_t * +embeddedice_build_reg_cache(target_t *target, arm7_9_common_t *arm7_9) { int retval; reg_cache_t *reg_cache = malloc(sizeof(reg_cache_t)); @@ -153,7 +175,7 @@ reg_cache_t* embeddedice_build_reg_cache(target_t *target, arm7_9_common_t *arm7 int i; int eice_version = 0; - /* register a register arch-type for EmbeddedICE registers only once */ + /* register arch-type for EmbeddedICE registers only once */ if (embeddedice_reg_arch_type == -1) embeddedice_reg_arch_type = register_reg_arch_type( embeddedice_get_reg, embeddedice_set_reg_w_exec); @@ -267,12 +289,17 @@ reg_cache_t* embeddedice_build_reg_cache(target_t *target, arm7_9_common_t *arm7 if (strcmp(target_get_name(target), "feroceon") == 0 || strcmp(target_get_name(target), "dragonite") == 0) break; - LOG_ERROR("unknown EmbeddedICE version (comms ctrl: 0x%8.8" PRIx32 ")", buf_get_u32(reg_list[EICE_COMMS_CTRL].value, 0, 32)); + LOG_ERROR("unknown EmbeddedICE version " + "(comms ctrl: 0x%8.8" PRIx32 ")", + buf_get_u32(reg_list[EICE_COMMS_CTRL].value, 0, 32)); } return reg_cache; } +/** + * Initialize EmbeddedICE module, if needed. + */ int embeddedice_setup(target_t *target) { int retval; @@ -296,25 +323,13 @@ int embeddedice_setup(target_t *target) return jtag_execute_queue(); } -static int embeddedice_get_reg(reg_t *reg) -{ - int retval; - if ((retval = embeddedice_read_reg(reg)) != ERROR_OK) - { - LOG_ERROR("BUG: error scheduling EmbeddedICE register read"); - return retval; - } - - if ((retval = jtag_execute_queue()) != ERROR_OK) - { - LOG_ERROR("register read failed"); - return retval; - } - - return ERROR_OK; -} - -int embeddedice_read_reg_w_check(reg_t *reg, uint8_t* check_value, uint8_t* check_mask) +/** + * Queue a read for an EmbeddedICE register into the register cache, + * optionally checking the value read. + * Note that at this level, all registers are 32 bits wide. + */ +int embeddedice_read_reg_w_check(reg_t *reg, + uint8_t *check_value, uint8_t *check_mask) { embeddedice_reg_t *ice_reg = reg->arch_info; uint8_t reg_addr = ice_reg->addr & 0x1f; @@ -327,6 +342,7 @@ int embeddedice_read_reg_w_check(reg_t *reg, uint8_t* check_value, uint8_t* chec arm_jtag_set_instr(ice_reg->jtag_info, ice_reg->jtag_info->intest_instr, NULL); + /* bits 31:0 -- data (ignored here) */ fields[0].tap = ice_reg->jtag_info->tap; fields[0].num_bits = 32; fields[0].out_value = reg->value; @@ -334,6 +350,7 @@ int embeddedice_read_reg_w_check(reg_t *reg, uint8_t* check_value, uint8_t* chec fields[0].check_value = NULL; fields[0].check_mask = NULL; + /* bits 36:32 -- register */ fields[1].tap = ice_reg->jtag_info->tap; fields[1].num_bits = 5; fields[1].out_value = field1_out; @@ -342,6 +359,7 @@ int embeddedice_read_reg_w_check(reg_t *reg, uint8_t* check_value, uint8_t* chec fields[1].check_value = NULL; fields[1].check_mask = NULL; + /* bit 37 -- 0/read */ fields[2].tap = ice_reg->jtag_info->tap; fields[2].num_bits = 1; fields[2].out_value = field2_out; @@ -350,8 +368,10 @@ int embeddedice_read_reg_w_check(reg_t *reg, uint8_t* check_value, uint8_t* chec fields[2].check_value = NULL; fields[2].check_mask = NULL; + /* traverse Update-DR, setting address for the next read */ jtag_add_dr_scan(3, fields, jtag_get_end_state()); + /* bits 31:0 -- the data we're reading (and maybe checking) */ fields[0].in_value = reg->value; fields[0].check_value = check_value; fields[0].check_mask = check_mask; @@ -362,14 +382,19 @@ int embeddedice_read_reg_w_check(reg_t *reg, uint8_t* check_value, uint8_t* chec */ buf_set_u32(fields[1].out_value, 0, 5, eice_regs[EICE_COMMS_CTRL].addr); + /* traverse Update-DR, reading but with no other side effects */ jtag_add_dr_scan_check(3, fields, jtag_get_end_state()); return ERROR_OK; } -/* receive <size> words of 32 bit from the DCC - * we pretend the target is always going to be fast enough - * (relative to the JTAG clock), so we don't need to handshake +/** + * Receive a block of size 32-bit words from the DCC. + * We assume the target is always going to be fast enough (relative to + * the JTAG clock) that the debugger won't need to poll the handshake + * bit. The JTAG clock is usually at least six times slower than the + * functional clock, so the 50+ JTAG clocks needed to receive the word + * allow hundreds of instruction cycles (per word) in the target. */ int embeddedice_receive(arm_jtag_t *jtag_info, uint32_t *data, uint32_t size) { @@ -420,11 +445,19 @@ int embeddedice_receive(arm_jtag_t *jtag_info, uint32_t *data, uint32_t size) return jtag_execute_queue(); } +/** + * Queue a read for an EmbeddedICE register into the register cache, + * not checking the value read. + */ int embeddedice_read_reg(reg_t *reg) { return embeddedice_read_reg_w_check(reg, NULL, NULL); } +/** + * Queue a write for an EmbeddedICE register, updating the register cache. + * Uses embeddedice_write_reg(). + */ void embeddedice_set_reg(reg_t *reg, uint32_t value) { embeddedice_write_reg(reg, value); @@ -435,19 +468,23 @@ void embeddedice_set_reg(reg_t *reg, uint32_t value) } +/** + * Write an EmbeddedICE register, updating the register cache. + * Uses embeddedice_set_reg(); not queued. + */ int embeddedice_set_reg_w_exec(reg_t *reg, uint8_t *buf) { int retval; - embeddedice_set_reg(reg, buf_get_u32(buf, 0, reg->size)); + embeddedice_set_reg(reg, buf_get_u32(buf, 0, reg->size)); if ((retval = jtag_execute_queue()) != ERROR_OK) - { LOG_ERROR("register write failed"); - return retval; - } - return ERROR_OK; + return retval; } +/** + * Queue a write for an EmbeddedICE register, bypassing the register cache. + */ void embeddedice_write_reg(reg_t *reg, uint32_t value) { embeddedice_reg_t *ice_reg = reg->arch_info; @@ -461,17 +498,24 @@ void embeddedice_write_reg(reg_t *reg, uint32_t value) uint8_t reg_addr = ice_reg->addr & 0x1f; embeddedice_write_reg_inner(ice_reg->jtag_info->tap, reg_addr, value); - } +/** + * Queue a write for an EmbeddedICE register, using cached value. + * Uses embeddedice_write_reg(). + */ void embeddedice_store_reg(reg_t *reg) { embeddedice_write_reg(reg, buf_get_u32(reg->value, 0, reg->size)); } -/* send <size> words of 32 bit to the DCC - * we pretend the target is always going to be fast enough - * (relative to the JTAG clock), so we don't need to handshake +/** + * Send a block of size 32-bit words to the DCC. + * We assume the target is always going to be fast enough (relative to + * the JTAG clock) that the debugger won't need to poll the handshake + * bit. The JTAG clock is usually at least six times slower than the + * functional clock, so the 50+ JTAG clocks needed to receive the word + * allow hundreds of instruction cycles (per word) in the target. */ int embeddedice_send(arm_jtag_t *jtag_info, uint32_t *data, uint32_t size) { @@ -515,7 +559,8 @@ int embeddedice_send(arm_jtag_t *jtag_info, uint32_t *data, uint32_t size) return ERROR_OK; } -/* wait for DCC control register R/W handshake bit to become active +/** + * Poll DCC control register until read or write handshake completes. */ int embeddedice_handshake(arm_jtag_t *jtag_info, int hsbit, uint32_t timeout) { @@ -558,8 +603,7 @@ int embeddedice_handshake(arm_jtag_t *jtag_info, int hsbit, uint32_t timeout) jtag_add_dr_scan(3, fields, jtag_get_end_state()); gettimeofday(&lap, NULL); - do - { + do { jtag_add_dr_scan(3, fields, jtag_get_end_state()); if ((retval = jtag_execute_queue()) != ERROR_OK) return retval; @@ -568,20 +612,25 @@ int embeddedice_handshake(arm_jtag_t *jtag_info, int hsbit, uint32_t timeout) return ERROR_OK; gettimeofday(&now, NULL); - } - while ((uint32_t)((now.tv_sec-lap.tv_sec)*1000 + (now.tv_usec-lap.tv_usec)/1000) <= timeout); + } while ((uint32_t)((now.tv_sec - lap.tv_sec) * 1000 + + (now.tv_usec - lap.tv_usec) / 1000) <= timeout); return ERROR_TARGET_TIMEOUT; } #ifndef HAVE_JTAG_MINIDRIVER_H -/* this is the inner loop of the open loop DCC write of data to target */ -void embeddedice_write_dcc(jtag_tap_t *tap, int reg_addr, uint8_t *buffer, int little, int count) +/** + * This is an inner loop of the open loop DCC write of data to target + */ +void embeddedice_write_dcc(jtag_tap_t *tap, + int reg_addr, uint8_t *buffer, int little, int count) { int i; + for (i = 0; i < count; i++) { - embeddedice_write_reg_inner(tap, reg_addr, fast_target_buffer_get_u32(buffer, little)); + embeddedice_write_reg_inner(tap, reg_addr, + fast_target_buffer_get_u32(buffer, little)); buffer += 4; } } |