diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/target/target/str9comstick.cfg | 25 |
1 files changed, 24 insertions, 1 deletions
diff --git a/src/target/target/str9comstick.cfg b/src/target/target/str9comstick.cfg index 2a2366e5..a75b4760 100644 --- a/src/target/target/str9comstick.cfg +++ b/src/target/target/str9comstick.cfg @@ -10,6 +10,17 @@ reset_config trst_and_srst #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME str912 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} if { [info exists FLASHTAPID ] } { set _FLASHTAPID $FLASHTAPID @@ -25,7 +36,6 @@ if { [info exists CPUTAPID ] } { } jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xf -irmask 0xf -expected-id $_CPUTAPID - if { [info exists BSTAPID ] } { set _BSTAPID $BSTAPID } else { @@ -36,7 +46,20 @@ jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_ set _TARGETNAME [format "%s.cpu" $_CHIPNAME] target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e +$_TARGETNAME configure -event reset-init { + # We can increase speed now that we know the target is halted. + #jtag_rclk 3000 + + # -- Enable 96K RAM + # PFQBC enabled / DTCM & AHB wait-states disabled + mww 0x5C002034 0x0191 + + str9x flash_config 0 4 2 0 0x80000 + flash protect 0 0 7 off +} + $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank str9x 0x00000000 0x00080000 0 0 0 +flash bank str9x 0x00080000 0x00008000 0 0 0 |