summaryrefslogtreecommitdiff
path: root/tcl/target
diff options
context:
space:
mode:
Diffstat (limited to 'tcl/target')
-rw-r--r--tcl/target/at91r40008.cfg2
-rw-r--r--tcl/target/epc9301.cfg2
-rw-r--r--tcl/target/lpc1768.cfg2
-rw-r--r--tcl/target/lpc2103.cfg2
-rw-r--r--tcl/target/lpc2124.cfg2
-rw-r--r--tcl/target/lpc2129.cfg2
-rw-r--r--tcl/target/lpc2148.cfg2
-rw-r--r--tcl/target/lpc2294.cfg2
-rw-r--r--tcl/target/lpc2378.cfg2
-rw-r--r--tcl/target/lpc2478.cfg2
-rw-r--r--tcl/target/smdk6410.cfg2
-rw-r--r--tcl/target/stm32.cfg2
-rw-r--r--tcl/target/xba_revA3.cfg2
13 files changed, 13 insertions, 13 deletions
diff --git a/tcl/target/at91r40008.cfg b/tcl/target/at91r40008.cfg
index fe755b4d..eb6cabaa 100644
--- a/tcl/target/at91r40008.cfg
+++ b/tcl/target/at91r40008.cfg
@@ -45,7 +45,7 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0
-flash bank cfi 0x10000000 0x400000 2 2 0
+flash bank cfi 0x10000000 0x400000 2 2 $_TARGETNAME
# For more information about the configuration files, take a look at:
# openocd.texi
diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg
index f3fe7eb1..2b4155fb 100644
--- a/tcl/target/epc9301.cfg
+++ b/tcl/target/epc9301.cfg
@@ -28,4 +28,4 @@ target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
#flash configuration
#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x60000000 0x1000000 2 2 0
+flash bank cfi 0x60000000 0x1000000 2 2 $_TARGETNAME
diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg
index fbf7117c..63ec1bb3 100644
--- a/tcl/target/lpc1768.cfg
+++ b/tcl/target/lpc1768.cfg
@@ -44,7 +44,7 @@ $_TARGETNAME configure -event reset-init {
# LPC1768 has 512kB of user-available FLASH (bootloader is located in separate dedicated region).
# flash bank lpc1700 <base> <size> 0 0 <target#> <variant> <cclk> [calc_checksum]
-flash bank lpc2000 0x0 0x80000 0 0 0 lpc1700 12000 calc_checksum
+flash bank lpc2000 0x0 0x80000 0 0 $_TARGETNAME lpc1700 12000 calc_checksum
# 4MHz / 6 = 666kHz, so use 500
jtag_khz 500
diff --git a/tcl/target/lpc2103.cfg b/tcl/target/lpc2103.cfg
index 899ca237..1a880761 100644
--- a/tcl/target/lpc2103.cfg
+++ b/tcl/target/lpc2103.cfg
@@ -35,4 +35,4 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s
# 32kB of internal Flash, core clocked with 12MHz crystal
# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum]
-flash bank lpc2000 0x0 0x8000 0 0 0 lpc2000_v2 12000 calc_checksum
+flash bank lpc2000 0x0 0x8000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum
diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg
index 9430c1b0..61d411b5 100644
--- a/tcl/target/lpc2124.cfg
+++ b/tcl/target/lpc2124.cfg
@@ -39,4 +39,4 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s
#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum
+flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum
diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg
index daaa8d56..5438fc3c 100644
--- a/tcl/target/lpc2129.cfg
+++ b/tcl/target/lpc2129.cfg
@@ -38,4 +38,4 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
+flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum
diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg
index e70947fe..b5023437 100644
--- a/tcl/target/lpc2148.cfg
+++ b/tcl/target/lpc2148.cfg
@@ -52,4 +52,4 @@ $_TARGETNAME configure -event reset-init {
}
# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum]
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
+flash bank lpc2000 0x0 0x7d000 0 0 $_TARGETNAME lpc2000_v2 14765 calc_checksum
diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg
index 399b11df..08fbf581 100644
--- a/tcl/target/lpc2294.cfg
+++ b/tcl/target/lpc2294.cfg
@@ -32,7 +32,7 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s
#flash configuration
#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
+flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum
# For more information about the configuration files, take a look at:
# openocd.texi
diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg
index d34ffae6..34b9963f 100644
--- a/tcl/target/lpc2378.cfg
+++ b/tcl/target/lpc2378.cfg
@@ -43,7 +43,7 @@ $_TARGETNAME configure -event reset-init {
# LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
# After reset the chip uses its internal 4MHz RC oscillator
#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
-flash bank lpc2000 0x0 0x0007D000 0 0 0 lpc2000_v2 4000 calc_checksum
+flash bank lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum
# 4MHz / 6 = 666kHz, so use 500
jtag_khz 500
diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg
index 1d2058b0..bf33ae0e 100644
--- a/tcl/target/lpc2478.cfg
+++ b/tcl/target/lpc2478.cfg
@@ -43,7 +43,7 @@ $_TARGETNAME configure -event reset-init {
# LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
# After reset the chip uses its internal 4MHz RC oscillator.
# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
-flash bank lpc2000 0x0 0x7D000 0 0 0 lpc2000_v2 12000 calc_checksum
+flash bank lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum
# Try to use RCLK, if RCLK is not available use "normal" mode. 4MHz / 6 = 666kHz, so use 500.
jtag_rclk 500
diff --git a/tcl/target/smdk6410.cfg b/tcl/target/smdk6410.cfg
index 6ce07cae..7f15f8b8 100644
--- a/tcl/target/smdk6410.cfg
+++ b/tcl/target/smdk6410.cfg
@@ -5,4 +5,4 @@
source [find target/samsung_s3c6410.cfg]
-flash bank cfi 0x00000000 0x00100000 2 2 0 jedec_probe \ No newline at end of file
+flash bank cfi 0x00000000 0x00100000 2 2 $_TARGETNAME jedec_probe
diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg
index a37e7334..b5a86527 100644
--- a/tcl/target/stm32.cfg
+++ b/tcl/target/stm32.cfg
@@ -62,7 +62,7 @@ target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNA
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-flash bank stm32x 0 0 0 0 0
+flash bank stm32x 0 0 0 0 $_TARGETNAME
# For more information about the configuration files, take a look at:
# openocd.texi
diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg
index 0595fa16..e1c88705 100644
--- a/tcl/target/xba_revA3.cfg
+++ b/tcl/target/xba_revA3.cfg
@@ -79,7 +79,7 @@ $_TARGETNAME configure -event reset-init {
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0
-flash bank cfi 0x50000000 0x400000 2 2 0
+flash bank cfi 0x50000000 0x400000 2 2 $_TARGETNAME
init
reset init