summaryrefslogtreecommitdiff
path: root/tcl/target
diff options
context:
space:
mode:
Diffstat (limited to 'tcl/target')
-rw-r--r--tcl/target/lm3s1968.cfg29
-rw-r--r--tcl/target/lm3s6965.cfg38
-rw-r--r--tcl/target/lm3s9b9x.cfg33
-rw-r--r--tcl/target/stellaris.cfg8
4 files changed, 7 insertions, 101 deletions
diff --git a/tcl/target/lm3s1968.cfg b/tcl/target/lm3s1968.cfg
deleted file mode 100644
index 330bb56a..00000000
--- a/tcl/target/lm3s1968.cfg
+++ /dev/null
@@ -1,29 +0,0 @@
-# Script for TI/Luminary Stellaris LM3S1968
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME lm3s1968
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- set _CPUTAPID 0x3ba00477
-}
-
-#jtag scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID
-
-# the luminary variant causes a software reset rather than asserting SRST
-# this stops the debug registers from being cleared
-# this will be fixed in later revisions of silicon
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3s
-
-# 8k working area at base of ram, not backed up
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000
-
-#flash configuration
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME
diff --git a/tcl/target/lm3s6965.cfg b/tcl/target/lm3s6965.cfg
deleted file mode 100644
index 137cba9d..00000000
--- a/tcl/target/lm3s6965.cfg
+++ /dev/null
@@ -1,38 +0,0 @@
-# TI/Luminary Stellaris lm3s6965
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME lm3s6965
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- set _CPUTAPID 0x3ba00477
-}
-
-# jtag speed
-adapter_khz 500
-
-adapter_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#LM3S6965 Evaluation Board has only srst
-reset_config srst_only
-
-#jtag scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID
-
-# the luminary variant causes a software reset rather than asserting SRST
-# this stops the debug registers from being cleared
-# this will be fixed in later revisions of silicon
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3s
-
-# 8k working area at base of ram, not backed up
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000
-
-#flash configuration
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME
diff --git a/tcl/target/lm3s9b9x.cfg b/tcl/target/lm3s9b9x.cfg
deleted file mode 100644
index a727251f..00000000
--- a/tcl/target/lm3s9b9x.cfg
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# Luminary Micro Stellaris LM3S9B9x Microcontroller
-#
-# http://www.luminarymicro.com/products/lm3s9b90.html
-# http://www.luminarymicro.com/products/lm3s9b92.htm
-#
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME lm3s9b9x
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- # Fourth generation "Tempest" device
- set _CPUTAPID 0x4ba00477
-}
-
-#jtag scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID
-
-#Cortex-M3 with Luminary lm3s variant
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3s
-
-# 16k working area at base of ram, not backed up
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x4000
-
-#flash configuration
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME
diff --git a/tcl/target/stellaris.cfg b/tcl/target/stellaris.cfg
index 5f4428f5..4235f910 100644
--- a/tcl/target/stellaris.cfg
+++ b/tcl/target/stellaris.cfg
@@ -18,6 +18,12 @@ if { [info exists CPUTAPID ] } {
set _CPUTAPID 0x0ba00477
}
+if { [info exists WORKAREASIZE ] } {
+ set _WORKAREASIZE $WORKAREASIZE
+} else {
+ set _WORKAREASIZE 0x2000
+}
+
jtag newtap $_CHIPNAME cpu -irlen 4 -irmask 0xf \
-expected-id $_CPUTAPID -ignore-version
@@ -33,7 +39,7 @@ target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu \
# NOTE: you may need or want to reconfigure the work area;
# some parts have just 6K, and you may want to use other
# addresses (at end of mem not beginning) or back it up.
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
# JTAG speed ... slow enough to work with a 12 MHz RC oscillator;
# LM3S parts don't support RTCK