summaryrefslogtreecommitdiff
path: root/tcl/target
diff options
context:
space:
mode:
Diffstat (limited to 'tcl/target')
-rw-r--r--tcl/target/at91sam7sx.cfg3
-rw-r--r--tcl/target/lpc2294.cfg3
-rw-r--r--tcl/target/mega128.cfg3
-rw-r--r--tcl/target/pic32mx.cfg3
-rw-r--r--tcl/target/sam7x256.cfg3
-rw-r--r--tcl/target/stm32.cfg3
-rw-r--r--tcl/target/str710.cfg3
-rw-r--r--tcl/target/str912.cfg3
8 files changed, 0 insertions, 24 deletions
diff --git a/tcl/target/at91sam7sx.cfg b/tcl/target/at91sam7sx.cfg
index f3cc88e9..6cbd6b67 100644
--- a/tcl/target/at91sam7sx.cfg
+++ b/tcl/target/at91sam7sx.cfg
@@ -51,6 +51,3 @@ $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-a
#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg
index 8ed6352c..6f341717 100644
--- a/tcl/target/lpc2294.cfg
+++ b/tcl/target/lpc2294.cfg
@@ -28,6 +28,3 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-a
# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
diff --git a/tcl/target/mega128.cfg b/tcl/target/mega128.cfg
index bb7cdeef..212a2673 100644
--- a/tcl/target/mega128.cfg
+++ b/tcl/target/mega128.cfg
@@ -38,6 +38,3 @@ flash bank $_FLASHNAME avr 0 0 0 0 $_TARGETNAME
#flash write_image E:/Versaloon/Software/CAMERAPROTOCOLAGENT.hex
#reset run
#shutdown
-#
-# For more information about the configuration files, take a look at:
-# openocd.texi
diff --git a/tcl/target/pic32mx.cfg b/tcl/target/pic32mx.cfg
index 202668b8..efffd040 100644
--- a/tcl/target/pic32mx.cfg
+++ b/tcl/target/pic32mx.cfg
@@ -78,6 +78,3 @@ flash bank $_FLASHNAME pic32mx 0x1d000000 0 0 0 $_TARGETNAME
# add virtual banks for kseg0 and kseg1
flash bank vbank2 virtual 0xbd000000 0 0 0 $_TARGETNAME $_FLASHNAME
flash bank vbank3 virtual 0x9d000000 0 0 0 $_TARGETNAME $_FLASHNAME
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
diff --git a/tcl/target/sam7x256.cfg b/tcl/target/sam7x256.cfg
index 19145e5c..dd364585 100644
--- a/tcl/target/sam7x256.cfg
+++ b/tcl/target/sam7x256.cfg
@@ -48,6 +48,3 @@ $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-a
#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg
index a13dc314..fa59e351 100644
--- a/tcl/target/stm32.cfg
+++ b/tcl/target/stm32.cfg
@@ -64,6 +64,3 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME stm32x 0 0 0 0 $_TARGETNAME
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg
index a5955b68..0f61d443 100644
--- a/tcl/target/str710.cfg
+++ b/tcl/target/str710.cfg
@@ -51,6 +51,3 @@ set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 $_TARGETNAME STR71x
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg
index a16c83a0..9b0a7083 100644
--- a/tcl/target/str912.cfg
+++ b/tcl/target/str912.cfg
@@ -67,6 +67,3 @@ set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 $_TARGETNAME
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 $_TARGETNAME
-
-# For more information about the configuration files, take a look at:
-# openocd.texi