5 files changed, 339 insertions, 339 deletions
diff --git a/testing/examples/LPC2148Test/prj/eclipse_ram.gdb b/testing/examples/LPC2148Test/prj/eclipse_ram.gdb
index 48796ae4..4f423124 100644
--- a/testing/examples/LPC2148Test/prj/eclipse_ram.gdb
+++ b/testing/examples/LPC2148Test/prj/eclipse_ram.gdb
@@ -1,11 +1,11 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 sw_bkpts enable
-monitor mww 0xE01FC040 0x0002
-monitor mdw 0xE01FC040
-load
-break main
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 sw_bkpts enable
+monitor mww 0xE01FC040 0x0002
+monitor mdw 0xE01FC040
+load
+break main
 continue
 \ No newline at end of file
diff --git a/testing/examples/LPC2148Test/prj/eclipse_rom.gdb b/testing/examples/LPC2148Test/prj/eclipse_rom.gdb
index bbaf76b5..86780056 100644
--- a/testing/examples/LPC2148Test/prj/eclipse_rom.gdb
+++ b/testing/examples/LPC2148Test/prj/eclipse_rom.gdb
@@ -1,11 +1,11 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 force_hw_bkpts enable
-monitor mww 0xE01FC040 0x0002
-monitor mdw 0xE01FC040
-load
-break main
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 force_hw_bkpts enable
+monitor mww 0xE01FC040 0x0002
+monitor mdw 0xE01FC040
+load
+break main
 continue
 \ No newline at end of file
diff --git a/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg b/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
index 85b09e0c..842687f3 100644
--- a/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
+++ b/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
@@ -1,38 +1,38 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-# tell gdb our flash memory map
-# and enable flash programming
-gdb_memory_map enable
-gdb_flash_program enable
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 3
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
-
-working_area 0 0x40000000 0x4000 nobackup
-
-#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 3
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
+run_and_halt_time 0 30
+
+working_area 0 0x40000000 0x4000 nobackup
+
+#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
diff --git a/testing/examples/LPC2148Test/prj/lpc2148_ram.ld b/testing/examples/LPC2148Test/prj/lpc2148_ram.ld
index 04f52471..b7951342 100644
--- a/testing/examples/LPC2148Test/prj/lpc2148_ram.ld
+++ b/testing/examples/LPC2148Test/prj/lpc2148_ram.ld
@@ -1,140 +1,140 @@
-/****************************************************************************
-*  Copyright (c) 2006 by Michael Fischer. All rights reserved.
-*
-*  Redistribution and use in source and binary forms, with or without 
-*  modification, are permitted provided that the following conditions 
-*  are met:
-*  
-*  1. Redistributions of source code must retain the above copyright 
-*     notice, this list of conditions and the following disclaimer.
-*  2. Redistributions in binary form must reproduce the above copyright
-*     notice, this list of conditions and the following disclaimer in the 
-*     documentation and/or other materials provided with the distribution.
-*  3. Neither the name of the author nor the names of its contributors may 
-*     be used to endorse or promote products derived from this software 
-*     without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
-*  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
-*  THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
-*  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
-*  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 
-*  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 
-*  AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
-*  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
-*  THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
-*  SUCH DAMAGE.
-*
-****************************************************************************
-*
-*  History:
-*
-*  18.12.06  mifi   First Version
-****************************************************************************/
-
-
-ENTRY(ResetHandler)
-SEARCH_DIR(.)
-
-/*
- * Define stack size here
- */
-FIQ_STACK_SIZE = 0x0100;
-IRQ_STACK_SIZE = 0x0100;
-ABT_STACK_SIZE = 0x0100;
-UND_STACK_SIZE = 0x0100;
-SVC_STACK_SIZE = 0x0400;
-
-/*
- * This file, olimex_lpcp2148_ram.ld, locate the program in the internal
- * ram of the LPC2148. For more information about the memory of the LPC2148
- * take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
- * Reference is made to the user manual from 25 July 2006 Rev. 02
- *
- * Take a look at page 8, section 1.Memory maps
- */
- 
-MEMORY
-{
-  ram : org = 0x40000000, len = 32k
-}
-
-/*
- * Do not change the next code
- */
-SECTIONS
-{
-  .text :
-  {
-    *(.vectors);
-    . = ALIGN(4);
-    *(.init);
-    . = ALIGN(4);
-    *(.text);
-    . = ALIGN(4);
-    *(.rodata);
-    . = ALIGN(4);
-    *(.rodata*);
-    . = ALIGN(4);
-    *(.glue_7t);
-    . = ALIGN(4);
-    *(.glue_7);
-    . = ALIGN(4);
-    etext = .;
-  } > ram
-
-  .data :
-  {
-    PROVIDE (__data_start = .);
-    *(.data)
-    . = ALIGN(4);
-    edata = .;
-    _edata = .;
-    PROVIDE (__data_end = .);
-  } > ram
-
-  .bss :
-  {
-    PROVIDE (__bss_start = .);
-    *(.bss)
-    *(COMMON)
-    . = ALIGN(4);
-    PROVIDE (__bss_end = .);
-    
-    . = ALIGN(256);
-    
-    PROVIDE (__stack_start = .);
-    
-    PROVIDE (__stack_fiq_start = .);
-    . += FIQ_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_fiq_end = .);
-
-    PROVIDE (__stack_irq_start = .);
-    . += IRQ_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_irq_end = .);
-
-    PROVIDE (__stack_abt_start = .);
-    . += ABT_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_abt_end = .);
-
-    PROVIDE (__stack_und_start = .);
-    . += UND_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_und_end = .);
-
-    PROVIDE (__stack_svc_start = .);
-    . += SVC_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_svc_end = .);
-    PROVIDE (__stack_end = .);
-    PROVIDE (__heap_start = .);   
-  } > ram
-    
-}
-/*** EOF ***/
-
+/****************************************************************************
+*  Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+*  Redistribution and use in source and binary forms, with or without 
+*  modification, are permitted provided that the following conditions 
+*  are met:
+*  
+*  1. Redistributions of source code must retain the above copyright 
+*     notice, this list of conditions and the following disclaimer.
+*  2. Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in the 
+*     documentation and/or other materials provided with the distribution.
+*  3. Neither the name of the author nor the names of its contributors may 
+*     be used to endorse or promote products derived from this software 
+*     without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
+*  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
+*  THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
+*  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
+*  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 
+*  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 
+*  AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
+*  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
+*  THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
+*  SUCH DAMAGE.
+*
+****************************************************************************
+*
+*  History:
+*
+*  18.12.06  mifi   First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+/*
+ * This file, olimex_lpcp2148_ram.ld, locate the program in the internal
+ * ram of the LPC2148. For more information about the memory of the LPC2148
+ * take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
+ * Reference is made to the user manual from 25 July 2006 Rev. 02
+ *
+ * Take a look at page 8, section 1.Memory maps
+ */
+ 
+MEMORY
+{
+  ram : org = 0x40000000, len = 32k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+  .text :
+  {
+    *(.vectors);
+    . = ALIGN(4);
+    *(.init);
+    . = ALIGN(4);
+    *(.text);
+    . = ALIGN(4);
+    *(.rodata);
+    . = ALIGN(4);
+    *(.rodata*);
+    . = ALIGN(4);
+    *(.glue_7t);
+    . = ALIGN(4);
+    *(.glue_7);
+    . = ALIGN(4);
+    etext = .;
+  } > ram
+
+  .data :
+  {
+    PROVIDE (__data_start = .);
+    *(.data)
+    . = ALIGN(4);
+    edata = .;
+    _edata = .;
+    PROVIDE (__data_end = .);
+  } > ram
+
+  .bss :
+  {
+    PROVIDE (__bss_start = .);
+    *(.bss)
+    *(COMMON)
+    . = ALIGN(4);
+    PROVIDE (__bss_end = .);
+    
+    . = ALIGN(256);
+    
+    PROVIDE (__stack_start = .);
+    
+    PROVIDE (__stack_fiq_start = .);
+    . += FIQ_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_fiq_end = .);
+
+    PROVIDE (__stack_irq_start = .);
+    . += IRQ_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_irq_end = .);
+
+    PROVIDE (__stack_abt_start = .);
+    . += ABT_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_abt_end = .);
+
+    PROVIDE (__stack_und_start = .);
+    . += UND_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_und_end = .);
+
+    PROVIDE (__stack_svc_start = .);
+    . += SVC_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_svc_end = .);
+    PROVIDE (__stack_end = .);
+    PROVIDE (__heap_start = .);   
+  } > ram
+    
+}
+/*** EOF ***/
+
diff --git a/testing/examples/LPC2148Test/prj/lpc2148_rom.ld b/testing/examples/LPC2148Test/prj/lpc2148_rom.ld
index 73df37cb..5844fffc 100644
--- a/testing/examples/LPC2148Test/prj/lpc2148_rom.ld
+++ b/testing/examples/LPC2148Test/prj/lpc2148_rom.ld
@@ -1,141 +1,141 @@
-/****************************************************************************
-*  Copyright (c) 2006 by Michael Fischer. All rights reserved.
-*
-*  Redistribution and use in source and binary forms, with or without 
-*  modification, are permitted provided that the following conditions 
-*  are met:
-*  
-*  1. Redistributions of source code must retain the above copyright 
-*     notice, this list of conditions and the following disclaimer.
-*  2. Redistributions in binary form must reproduce the above copyright
-*     notice, this list of conditions and the following disclaimer in the 
-*     documentation and/or other materials provided with the distribution.
-*  3. Neither the name of the author nor the names of its contributors may 
-*     be used to endorse or promote products derived from this software 
-*     without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
-*  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
-*  THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
-*  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
-*  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 
-*  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 
-*  AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
-*  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
-*  THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
-*  SUCH DAMAGE.
-*
-****************************************************************************
-*
-*  History:
-*
-*  26.01.08  mifi   First Version
-****************************************************************************/
-
-
-ENTRY(ResetHandler)
-SEARCH_DIR(.)
-
-/*
- * Define stack size here
- */
-FIQ_STACK_SIZE = 0x0100;
-IRQ_STACK_SIZE = 0x0100;
-ABT_STACK_SIZE = 0x0100;
-UND_STACK_SIZE = 0x0100;
-SVC_STACK_SIZE = 0x0400;
-
-/*
- * This file, olimex_lpcp2148_ram.ld, locate the program in the internal
- * ram of the LPC2148. For more information about the memory of the LPC2148
- * take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
- * Reference is made to the user manual from 25 July 2006 Rev. 02
- *
- * Take a look at page 8, section 1.Memory maps
- */
- 
-MEMORY
-{
-  rom : org = 0x00000000, len = 512k	
-  ram : org = 0x40000000, len = 32k
-}
-
-/*
- * Do not change the next code
- */
-SECTIONS
-{
-  .text :
-  {
-    *(.vectors);
-    . = ALIGN(4);
-    *(.init);
-    . = ALIGN(4);
-    *(.text);
-    . = ALIGN(4);
-    *(.rodata);
-    . = ALIGN(4);
-    *(.rodata*);
-    . = ALIGN(4);
-    *(.glue_7t);
-    . = ALIGN(4);
-    *(.glue_7);
-    . = ALIGN(4);
-    etext = .;
-  } > rom
-
-  .data :
-  {
-    PROVIDE (__data_start = .);
-    *(.data)
-    . = ALIGN(4);
-    edata = .;
-    _edata = .;
-    PROVIDE (__data_end = .);
-  } > ram
-
-  .bss :
-  {
-    PROVIDE (__bss_start = .);
-    *(.bss)
-    *(COMMON)
-    . = ALIGN(4);
-    PROVIDE (__bss_end = .);
-    
-    . = ALIGN(256);
-    
-    PROVIDE (__stack_start = .);
-    
-    PROVIDE (__stack_fiq_start = .);
-    . += FIQ_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_fiq_end = .);
-
-    PROVIDE (__stack_irq_start = .);
-    . += IRQ_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_irq_end = .);
-
-    PROVIDE (__stack_abt_start = .);
-    . += ABT_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_abt_end = .);
-
-    PROVIDE (__stack_und_start = .);
-    . += UND_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_und_end = .);
-
-    PROVIDE (__stack_svc_start = .);
-    . += SVC_STACK_SIZE;
-    . = ALIGN(4);
-    PROVIDE (__stack_svc_end = .);
-    PROVIDE (__stack_end = .);
-    PROVIDE (__heap_start = .);   
-  } > ram
-    
-}
-/*** EOF ***/
-
+/****************************************************************************
+*  Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+*  Redistribution and use in source and binary forms, with or without 
+*  modification, are permitted provided that the following conditions 
+*  are met:
+*  
+*  1. Redistributions of source code must retain the above copyright 
+*     notice, this list of conditions and the following disclaimer.
+*  2. Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in the 
+*     documentation and/or other materials provided with the distribution.
+*  3. Neither the name of the author nor the names of its contributors may 
+*     be used to endorse or promote products derived from this software 
+*     without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
+*  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
+*  THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
+*  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
+*  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 
+*  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 
+*  AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
+*  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
+*  THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
+*  SUCH DAMAGE.
+*
+****************************************************************************
+*
+*  History:
+*
+*  26.01.08  mifi   First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+/*
+ * This file, olimex_lpcp2148_ram.ld, locate the program in the internal
+ * ram of the LPC2148. For more information about the memory of the LPC2148
+ * take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
+ * Reference is made to the user manual from 25 July 2006 Rev. 02
+ *
+ * Take a look at page 8, section 1.Memory maps
+ */
+ 
+MEMORY
+{
+  rom : org = 0x00000000, len = 512k	
+  ram : org = 0x40000000, len = 32k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+  .text :
+  {
+    *(.vectors);
+    . = ALIGN(4);
+    *(.init);
+    . = ALIGN(4);
+    *(.text);
+    . = ALIGN(4);
+    *(.rodata);
+    . = ALIGN(4);
+    *(.rodata*);
+    . = ALIGN(4);
+    *(.glue_7t);
+    . = ALIGN(4);
+    *(.glue_7);
+    . = ALIGN(4);
+    etext = .;
+  } > rom
+
+  .data :
+  {
+    PROVIDE (__data_start = .);
+    *(.data)
+    . = ALIGN(4);
+    edata = .;
+    _edata = .;
+    PROVIDE (__data_end = .);
+  } > ram
+
+  .bss :
+  {
+    PROVIDE (__bss_start = .);
+    *(.bss)
+    *(COMMON)
+    . = ALIGN(4);
+    PROVIDE (__bss_end = .);
+    
+    . = ALIGN(256);
+    
+    PROVIDE (__stack_start = .);
+    
+    PROVIDE (__stack_fiq_start = .);
+    . += FIQ_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_fiq_end = .);
+
+    PROVIDE (__stack_irq_start = .);
+    . += IRQ_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_irq_end = .);
+
+    PROVIDE (__stack_abt_start = .);
+    . += ABT_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_abt_end = .);
+
+    PROVIDE (__stack_und_start = .);
+    . += UND_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_und_end = .);
+
+    PROVIDE (__stack_svc_start = .);
+    . += SVC_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_svc_end = .);
+    PROVIDE (__stack_end = .);
+    PROVIDE (__heap_start = .);   
+  } > ram
+    
+}
+/*** EOF ***/
+