diff options
Diffstat (limited to 'testing')
| -rw-r--r-- | testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk | 102 |
1 files changed, 5 insertions, 97 deletions
diff --git a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk index 5b78daa2..304a8d89 100644 --- a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk +++ b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk @@ -1,4 +1,8 @@ -echo Setting up for the FreeScale iMX31 Board.\n +echo Script to load ledtest on iMX31PDK.\n + +# Note: you need to startup openocd with "-f board/imx31pdk.cfg" +# in order to it initialize RAM memory. + # SETUP GDB : # # Common gdb setup for ARM CPUs @@ -9,104 +13,8 @@ set prompt (arm-gdb) set endian little dir . -# DEFINE MACROS : -# -# Create a "refresh" macro to update gdb's screens after the cpu -# has been stopped by the other CPU or following an "monitor allstop" -define refresh - monitor set hbreak - cont - monitor clear hbreak -end - # CONNECT TO TARGET : target remote 127.0.0.1:3333 -monitor reset run -#FIX!!!! should be reset init! -monitor reset halt - -# iMX31 PDK board initialization commands: - -#// init_ccm - -monitor mww 0x53FC0000 0x040 -monitor mww 0x53F80000 0x074B0B7D - -#//532-133-66.5 -#//monitor mww 0x53F80004 0xFF871D58 -#//monitor mww 0x53F80010 0x0033280C - -#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40 -monitor mww 0x53F80004 0xFF871D50 -monitor mww 0x53F80010 0x00271C1B - -#// 208-104-52 -#//monitor mww 0x53F80004 0xFF871D48 -#//monitor mww 0x53F80010 0x04002000 - -#// Configure CPLD on CS5 -monitor mww 0xb8002050 0x0000DCF6 -monitor mww 0xb8002054 0x444A4541 -monitor mww 0xb8002058 0x44443302 - -#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits -#// in SW_PAD_CTL registers - -#// SDCLK -monitor mww 0x43FAC26C 0 - -#// CAS -monitor mww 0x43FAC270 0 - -#// RAS -monitor mww 0x43FAC274 0 - -#// CS2 (CSD0) -monitor mww 0x43FAC27C 0x1000 - -#// DQM3 -monitor mww 0x43FAC284 0 - -#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) -monitor mww 0x43FAC288 0 -monitor mww 0x43FAC28C 0 -monitor mww 0x43FAC290 0 -monitor mww 0x43FAC294 0 -monitor mww 0x43FAC298 0 -monitor mww 0x43FAC29C 0 -monitor mww 0x43FAC2A0 0 -monitor mww 0x43FAC2A4 0 -monitor mww 0x43FAC2A8 0 -monitor mww 0x43FAC2AC 0 -monitor mww 0x43FAC2B0 0 -monitor mww 0x43FAC2B4 0 -monitor mww 0x43FAC2B8 0 -monitor mww 0x43FAC2BC 0 -monitor mww 0x43FAC2C0 0 -monitor mww 0x43FAC2C4 0 -monitor mww 0x43FAC2C8 0 -monitor mww 0x43FAC2CC 0 -monitor mww 0x43FAC2D0 0 -monitor mww 0x43FAC2D4 0 -monitor mww 0x43FAC2D8 0 -monitor mww 0x43FAC2DC 0 - -#// Initialization script for 32 bit DDR on MX31 PDK -monitor mww 0xB8001010 0x00000004 -monitor mww 0xB8001004 0x006ac73a -monitor mww 0xB8001000 0x92100000 -monitor mww 0x80000f00 0x12344321 -monitor mww 0xB8001000 0xa2100000 -monitor mww 0x80000000 0x12344321 -monitor mww 0x80000000 0x12344321 -monitor mww 0xB8001000 0xb2100000 -#monitor char 0x80000033 0xda -monitor mwb 0x80000033 0xda -#monitor char 0x81000000 0xff -monitor mwb 0x81000000 0xff -monitor mww 0xB8001000 0x82226080 -monitor mww 0x80000000 0xDEADBEEF -monitor mww 0xB8001010 0x0000000c # LOAD IMAGE : # |