summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
...
* transport: fix LOG_DEBUG gaffesimon qian2011-01-131-2/+4
| | | | | | | | LOG_DEBUG() arguments are only evaluated when DEBUG logging is enabled, do not use arguments that have side effects like foo++. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cfi: fix release build warningsSpencer Oliver2011-01-101-2/+2
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* nit: more LOG_* \n fixesEric Wetzel2011-01-0916-76/+72
| | | | | | | | | Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages Remove LOG_INFO_N LOG_INFO_N was only used once and had a \n at the end Change LOG_USER_N calls that end with \n to LOG_USER
* Add another level of procedures to LPC2xxx initialization - procedures for ↵Freddie Chopin2011-01-097-21/+105
| | | | | | specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else. Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
* present CM3 Trace agendaDavid Brownell2011-01-092-0/+509
|
* Add common LPC2xxx setup procedure, use in all LPC2xxx files.Freddie Chopin2011-01-078-238/+85
| | | | Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
* cfi: use safer arch detectionSpencer Oliver2011-01-061-2/+8
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* loader: update loader src for armv7-m archSpencer Oliver2011-01-062-4/+6
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* Add the support for the armv7m arch.Jonathan Dumaresq2011-01-061-15/+64
| | | | Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
* Add the contrib file for the armv7m archJonathan Dumaresq2011-01-061-0/+79
| | | | Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
* nit: do not add \n at end of LOG_ERROREric Wetzel2011-01-0515-63/+63
| | | | Fixed in many other places, and submitted in response to Øyvind's invitation.
* mips32: add fastdata loader working areaSpencer Oliver2011-01-046-11/+29
| | | | | | | | | | Add a working area that is preserved between calls to mips_m4k_bulk_write_memory - this gives us a speed increase of approx 3kb/sec during flash writes to the pic32mx. This area is released during a resume/reset. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* target: change working area free data typeSpencer Oliver2011-01-042-3/+3
| | | | | | | We only use the struct working_area member 'free' as a true/false type so might as well use a bool data type. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* nit: do not add \n at end of LOG_ERRORØyvind Harboe2011-01-031-4/+4
| | | | | This is done in many other places as well, patch to fix gratefully accepted!
* error handling: the error number is not part of the user interfaceØyvind Harboe2011-01-0312-29/+26
| | | | | | | | Do not propagate error number to user. This is for internal programming purposes only. Error messages to the user is reported as text via LOG_ERROR(). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* actux3.cfg: add function to setup for u-boot debuggingMichael Schwingen2011-01-021-0/+22
| | | | Signed-off-by: Michael Schwingen <michael@schwingen.org>
* cfi_protect is not implemented on Spansion flashes (many do not even have ↵Michael Schwingen2011-01-021-2/+2
| | | | | | protection bits). Demote from error to warning, so that common board code can use "flash write_image erase unlock" regardless of the flash type. Signed-off-by: Michael Schwingen <michael@schwingen.org>
* non-CFI flash code uses data from CFI structures. Make sure that timeouts ↵Michael Schwingen2011-01-022-99/+98
| | | | | | are filled in on non-CFI flashes, and print CFI information in all cases, nut just on CFI flashes. Signed-off-by: Michael Schwingen <michael@schwingen.org>
* svf: implement sleep for RUNTEST min_timeJon Povey2011-01-021-30/+28
| | | | | | | | | | | Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> min_time was effectively ignored, I needed it to program a Lattice MachXO which uses a RUNTEST to wait for an erase operation, amongst other things. With this patch pauses happen and I can program the device with an SVF generated in LSC ispVM (with "Rev D Standard" checked to suppress nonstandard LOOP statements)
* svf: fix USAGE and related error reportingJon Povey2011-01-021-9/+4
| | | | Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
* NAND/S3CXXXX: remove private "target" copyAntonio Borneo2011-01-027-33/+16
| | | | | | | Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/ORION: remove private "target" copyAntonio Borneo2011-01-021-13/+5
| | | | | | | Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/NUC910: remove private "target" copyAntonio Borneo2011-01-021-21/+7
| | | | | | | Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/MX3: remove private "target" copyAntonio Borneo2011-01-022-22/+11
| | | | | | | Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/MX2: remove private "target" copyAntonio Borneo2011-01-022-20/+11
| | | | | | | Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/LPC3180: remove private "target" copyAntonio Borneo2011-01-022-24/+16
| | | | | | | Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/DAVINCI: remove private "target" copyAntonio Borneo2011-01-021-27/+17
| | | | | | | Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/AT91SAM9: remove private "target" copyAntonio Borneo2011-01-021-37/+22
| | | | | | | Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/TCL: prepare for common "target" referenceAntonio Borneo2011-01-022-3/+26
| | | | | | | | | Every NAND driver keeps private copy of "target" structure. Prepare infostructure to move private "target" copy in common/shared struct nand_device. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/TCL: fix segfault on syntax errorAntonio Borneo2011-01-021-1/+1
| | | | | | | Fix segfault if incomplete command "nand device dummy" is executed. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/CORE: Comment use of alive_sleep()Antonio Borneo2011-01-021-0/+1
| | | | Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NAND/CORE: Replace decimal dot in messagesAntonio Borneo2011-01-021-66/+66
| | | | | | | | | | | | Table of NAND devices reports operating voltage. Replace comma with proper decimal dot. Øyvind: "." is correct for UK/US, but incorrect for many other languages. OpenOCD is not localized at this point, so sticking to "." for US/UK should be OK. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* flash/nand: review NAND driver interfaceAntonio Borneo2011-01-0213-47/+2
| | | | | | | | | | From struct nand_flash_controller : - remove unused field register_commands; - remove field controller_ready, exported but never referenced. Remove dead code pointed by controller_ready. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* CORTEX A8: Fix broken CPU identificationMarek Vasut2010-12-301-3/+17
| | | | | | | This patch fixes the issue where the OMAP CPU (and possibly others) was mistaken for iMX51 and therefore had misadjusted debug base. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* Compilation Warnings on OS X 10.5Andrew MacIsaac2010-12-298-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I received a number of "-Wshadow" related warnings (treated as errors) while trying to build on OS X Leopard. In addition, there were two miscellaneous other warnings in the flash drivers. Attached are two patches which correct these issues and the commit messages to accompany them. My system has the following configuration (taken from uname -a): Darwin 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 === Werror_patch.txt Commit Message === compilation: fixes for -Wshadow warnings on OS X These changes fix -Wshadow compilation warnings on OS X 10.5.8 Compiled with the following configure command: ../configure --prefix=/usr/local --enable-maintainer-mode --enable-jlink --enable-ft2232_libftdi === flash_patch.txt Commit Message === compilation: fixes for flash driver warnings on OS X These changes fix two compilation warnings on OS X 10.5.8: ../../../../src/flash/nor/at91sam3.c:2767: warning: redundant redeclaration of 'at91sam3_flash' ../../../../src/flash/nor/at91sam3.c:101: warning: previous declaration of 'at91sam3_flash' was here and ../../../../src/flash/nor/stmsmi.c:205: warning: format not a string literal and no format arguments Compiled with the following configure command: ../configure --prefix=/usr/local --enable-maintainer-mode --enable-jlink --enable-ft2232_libftdi === Andrew
* warning: fix warning where GCC didn't catch a doubly declared global structureØyvind Harboe2010-12-291-1/+1
| | | | | | Why hasn't earlier versions of GCC caught this? Bug? Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* warnings: use more 'const' for char *Øyvind Harboe2010-12-2925-30/+30
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* target: do not expose error numbers to usersØyvind Harboe2010-12-291-6/+0
| | | | | | | error numbers are only reported at DEBUG log levels and used internally, they are not part of the user interface. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* initial SWD transport (SWD infrastructure #2)David Brownell2010-12-249-9/+425
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This piggy backs on JTAG so it's not yet pretty, but that seems unavoidable so far given today's OpenOCD internals. SWD init and data transfer are unfinished and untested, but that should cause no regressions, and will be addressed by the time drivers start using this infrastructure. Checking in whould get the code working better sooner, and turn up any structural/architectural issues while they're easier to fix. The debug adapter drivers will provide simple SWD driver structs with methods that kick in as needed (instead of JTAG). So far just one adapter driver has been updated (not yet ready to use or circulate). The biggest issues are probably - fault handling, where the ARM Debug Interface V5 pipelining needs work in both JTAG and SWD modes and - missing rewrite of block I/O code to work on both of our Cortex-ready transports (Current code is hard-wired to JTAG); relates also to the pipelining issue. - omitted support to activate/deactivate SWO/SWV trace (this is technically trivial, but configuring what to trace is NOT. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> ---- doc/openocd.texi | 17 ++ src/jtag/core.c | 3 src/jtag/interface.h | 4 src/jtag/jtag.h | 2 src/jtag/swd.h | 114 +++++++++++++++++++ src/jtag/tcl.c | 2 src/target/adi_v5_swd.c | 281 ++++++++++++++++++++++++++++++++++++++++++++++-- src/target/arm_adi_v5.c | 8 + src/target/arm_adi_v5.h | 3 9 files changed, 425 insertions(+), 9 deletions(-)
* stm32x : always use valid flash base addressSpencer Oliver2010-12-231-0/+3
| | | | | | | This change matches the previous behaviour of using the known flash address. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* flash: print flash bank name on flash info cmdSpencer Oliver2010-12-231-2/+2
| | | | | | | | The flash bank name is a required element in adding flash banks, however other than looking at the config file there is no way of getting the name used in openocd. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* stm32: fix reversed option byte writeSpencer Oliver2010-12-231-4/+4
| | | | | | This has been a long standing bug that has never been spotted. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* stm32: update option bytes for stm32xl familySpencer Oliver2010-12-231-8/+79
| | | | | | | add supoort for xl family boot bank option. The option byte handling will be cleaned up in a later patch. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* stm32: add stm32 xl family flash supportSpencer Oliver2010-12-233-3/+57
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* stm32: add dual flash bank supportSpencer Oliver2010-12-232-28/+40
| | | | | | | This patch adds the initial dual flash bank support for devices such as the stm32xl family. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* contrib: change stm32 flash loader extensionSpencer Oliver2010-12-231-0/+0
| | | | | | | As the stm32 flash loader now uses the preprocessor change extension so that it used by default. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* lpc2148: redo to the new target configuration schemeØyvind Harboe2010-12-221-46/+41
| | | | | | | | | | | | Define a proc which PCBs can easily override. Also demonstrates how to add multiple TAP exepcted-id's using arguments. Added 0x3f0f0f0f as expected TAP-id. Old LPC2148 silicon I happened to have on my desk? Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* config: add init_targets proc that is executed just before initØyvind Harboe2010-12-222-0/+12
| | | | | | | | | | | this allows configuration scripts to export a init_targets proc rather than setting up the target directly. This allows for new conventions in how to set up target vs. board script and how to transfer default settings between board and target scripts. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* bootstrap: by default the submodules are initializedØyvind Harboe2010-12-221-7/+10
| | | | | | use "nosubmodule" to skip setting up submodules. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* server: remove error value from LOG_INFOØyvind Harboe2010-12-211-1/+1
| | | | | | | | | | the error values is not part of the interface to the user, so they should never be printed in LOG_INFO or LOG_USER. Printing them in LOG_DEBUG() rarely makes much sense but is OK. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-05 11:04:52 +0000