summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* - corrected str91x bank1 programming issuesntfreak2007-10-263-61/+65
| | | | | | | | - str91x protect_check fixed - bank number now correctly given to str91x flash_config command git-svn-id: svn://svn.berlios.de/openocd/trunk@211 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add verify_image commandntfreak2007-10-2218-11/+392
| | | | | | - add support for gdb qCRC packet (compare-sections command) git-svn-id: svn://svn.berlios.de/openocd/trunk@210 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - cleaned up str7, str9 and stm32 flash driversntfreak2007-10-0810-72/+236
| | | | | | | | | | | - str7 flash driver now checks correct busy bits depending on device - str9 flash driver now disables ITCM order as per st programming manual - added str7 disable_jtag command - added gdb_detach command - updated arm966e cp15 support - fix crash on mingw build when enabling target_request debugmsgs git-svn-id: svn://svn.berlios.de/openocd/trunk@209 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - flash autoerase <on|off> cmd added, default is off - flash banks are ↵ntfreak2007-10-019-116/+153
| | | | | | | | | | | calculated and erased prior to write (flash write_image only) - corrected array overrun in armv7m.c - corrected breakpoint memory allocation bug - image read now uses fgets, vastly improves reading of large files - improved hex file reading, support for Linear Address Record added git-svn-id: svn://svn.berlios.de/openocd/trunk@208 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Fixed display of sector sizes in flash.cmlu2007-09-107-107/+127
| | | | | | | | | - Clean up, remove unused variables and code in armv7, cortex_m3 and stellaris code - Move restore_context from cortex_m3 to armv7m - Updated halt handling for cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added ft2232_latency commandmlu2007-09-101-2/+21
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@205 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Patch by Michael Schwingen thatdrath2007-09-058-39/+72
| | | | | | | | | | | | | | - adds support for the Altium universal JTAG cable - adds support for "wiggler2" cable (basically a wiggler with added LED, documentation coming soon) - adds LED support. The LED is turned on during data transfer - works fine on Altium and wiggler2. - adds PORT_EXIT pattern that is written to port when exiting, in order to turn off power on cables that get their power from parallel port data lines - move port writes (with the system-specific ifdefs) to one central function - increased image cache size to 2KB (might require more adaptive cache handling, e.g. LRU) git-svn-id: svn://svn.berlios.de/openocd/trunk@204 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for setting JTAG frequency on ASIX PRESTO (thanks to Pavel ↵drath2007-08-256-221/+445
| | | | | | | | | | | | Chromy) - usbprog update (thanks to Benedikt Sauter) - added embeddedice_send and _handshake functions (thanks to Pavel Chromy) - added support for 4, 8 and 16 bit ports to etb.c git-svn-id: svn://svn.berlios.de/openocd/trunk@203 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - correctly initialize start address for XScale trace buffer decodes in ↵drath2007-08-212-1/+14
| | | | | | fill-once mode git-svn-id: svn://svn.berlios.de/openocd/trunk@202 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Support for AT91SAM7xx512 chipsmlu2007-08-201-134/+231
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@201 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Support for AT91SAM7xx512 chipsmlu2007-08-201-5/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@200 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - update file size when writing to a fileiodrath2007-08-201-2/+8
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@199 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - renamed "xscale dump_trace_buffer" to "xscale dump_trace" and added code ↵drath2007-08-173-7/+52
| | | | | | for it git-svn-id: svn://svn.berlios.de/openocd/trunk@198 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - update jtag_speed setting when changing it during runtime with a FT2232 ↵drath2007-08-166-10/+49
| | | | | | | | | | | based interface - use 'etm trigger_percent' setting when programming ETB trigger count - fixed some small bugs in ETM trace analysis - fixed minor bug in flash writing (thanks to Pavel Chromy) git-svn-id: svn://svn.berlios.de/openocd/trunk@197 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fixed several bugs in flash writing code (thanks to Pavel Chromy)drath2007-08-163-121/+149
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@196 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - corrected automake scriptdrath2007-08-143-3/+5
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@195 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not ↵drath2007-08-1414-221/+645
| | | | | | | | | | | | | | | | functional yet). Configure option changed from --enable-presto to --enable-presto_ftd2xx and --enable-presto_libftdi - completed trace point support for use with ARM7/9 DCC - completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities) - fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy) - fixed bug in image_add_section (thanks to Pavel Chromy) - at91sam7 sector erase reworked (thanks to Pavel Chromy) - merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fix build issues when not using autoconf/automake to buildntfreak2007-08-131-1/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@193 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - bumped version informationdrath2007-08-101-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@192 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - changed mingw host detection to *-mingw instead of *-*-mingw to work with ↵drath2007-08-102-2/+3
| | | | | | | | | i586-mingw32msvc-gcc - add replacements.h to log.h to make sure ERROR is undefined on windows git-svn-id: svn://svn.berlios.de/openocd/trunk@191 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - renamed M5960 USB JTAG to "flyswatter"drath2007-08-1058-642/+1624
| | | | | | | | | | | | | | | | | | | | - make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin) - various whitespace fixes - removed various warnings - add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann) - fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin) - switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed) - added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include semihosting, all ARM7/9 only for now) - added support for GDB vFlashXXX packets (thanks to Pavel Chromy) - added support for receiving data via ARM7/9 DCC - reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash write_image' (write image files (bin, hex, elf, s19) to a target). - added support for AMD/ST/SST 29F400B non-cfi flashes git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - trying to remove a breakpoint with target running should not exit(-1) from ↵mlu2007-08-091-2/+11
| | | | | | OpenOCD git-svn-id: svn://svn.berlios.de/openocd/trunk@189 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - cleaned up cycle counting in ETM analysisdrath2007-07-312-12/+9
| | | | | | | | - fixed broken OpenOCD version string git-svn-id: svn://svn.berlios.de/openocd/trunk@188 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add missing configure.in change from last checkindrath2007-07-313-1/+38
| | | | | | | | - add usbprog example config file - update version string git-svn-id: svn://svn.berlios.de/openocd/trunk@187 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - calculate cycles since last executed instruction when cycle-accurate ↵drath2007-07-317-38/+716
| | | | | | | | | | | tracing is enabled - increase memory pseudo-image cache size to 1024 byte for improved trace analysis performance - added OpenOCD+trace as an ETM capture driver example implementation - new usbprog driver (thanks to Benedikt Sauter) git-svn-id: svn://svn.berlios.de/openocd/trunk@186 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - motorola s19 file loader addedntfreak2007-07-314-9/+276
| | | | | | | | - added checksum support to intel hex file loader - elf file loader now ignores any bss sections - mingw build now always opens files in binary mode git-svn-id: svn://svn.berlios.de/openocd/trunk@185 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - corrected stm32x_handle_options_write_command, incorrect options printedntfreak2007-07-266-48/+66
| | | | | | - added prepare_reset_halt handler for cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@184 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - restrict direct parallel port access to x86 platforms (thanks to Vincent ↵drath2007-07-264-12/+25
| | | | | | Palatin) git-svn-id: svn://svn.berlios.de/openocd/trunk@183 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - documentation fixes (thanks to Uwe Hermann)drath2007-07-264-17/+54
| | | | | | | - bootstrapping changes to accomodate packaging (thanks to Uwe Hermann) git-svn-id: svn://svn.berlios.de/openocd/trunk@182 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reformat src/jtag/bitq.c (thanks to Pavel Chromy)drath2007-07-259-308/+300
| | | | | | | | | | | - fix multiple reads from FT2232 into same buffer location (thanks to Magnus Lundin) - retry JTAG chain validation (thanks to Magnus Lundin) - reworked GDB packet input handling (thanks to Pavel Chromy) - output error message when setting a watchpoint failed - removed duplicate out-of-bounds check in at91sam7.c (thanks to Pavel Chromy) git-svn-id: svn://svn.berlios.de/openocd/trunk@181 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for Asix Presto JTAG interface (thanks to Pavel Chromy and ↵drath2007-07-1517-14/+1864
| | | | | | | | | | | | Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fixed endianness helper macros (thanks to obilix and wiml for finding and ↵drath2007-06-288-134/+544
| | | | | | | | | | | | | fixing this bug) - added declarations for 32bit fileio access functions (network byte order) - fixed bug in etm trace dump file handling - added XScale trace buffer decoding - fixed arm_simulator ERROR numbers (-7xx used twice) - fixed minor bug in debug output in stellaris.c git-svn-id: svn://svn.berlios.de/openocd/trunk@178 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - ST STM32x cortex support addedntfreak2007-06-2413-321/+1271
| | | | | | | | - ST STM32x flash support added - cleaned up armv7m and cortex-m3 support, removed luminary specific code - cortex-m3 16bit read/write added (required for STM32x flash programming) git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for Intel/Marvel PXA27x (XScale) targetsdrath2007-06-219-127/+125
| | | | | | | | | | - added support for scans coming from or ending in Shift-DR or Shift-IR to bitbang code (required for XScale debugging) - cleaned up errror handlers. only use when there's a catchable error - fix segfault when etm was configured without a valid driver git-svn-id: svn://svn.berlios.de/openocd/trunk@176 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - str9xpec driver was using stricmp, changed to strcmp for posix compatibilityntfreak2007-06-161-32/+4
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@175 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added mingw elf patches from Vincent Palatinntfreak2007-06-1616-21/+1545
| | | | | | | - added str9x programming using flash controller tap (str9xpec), including option bytes and device lock/unlock - inttypes.h now used for long long printf style declarations git-svn-id: svn://svn.berlios.de/openocd/trunk@174 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for pseudo image type "mem", currently only used for etm ↵drath2007-06-154-23/+69
| | | | | | analysis: "etm image <target#> <dummy base address> mem" git-svn-id: svn://svn.berlios.de/openocd/trunk@173 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Added patch for Luminar Micors Fury class devices (Joe Kroesche)mlu2007-06-143-10/+91
| | | | | | Added support for NVGM bit 2 for AT91SAM7XC128/256 git-svn-id: svn://svn.berlios.de/openocd/trunk@172 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added stellaris.[ch] missing from Cortex-M3 mergedrath2007-06-142-0/+891
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@171 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - merged support for Cortex-M3 from cortex-m3 branch (thanks to Magnus Lundin)drath2007-06-1410-4/+3272
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@170 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added manpage for OpenOCD (thanks to Uwe Hermann)drath2007-06-1416-99/+931
| | | | | | | | | | - fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry - added support for auto image type detection (thanks to Vincent Palatin) - further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental) git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add support for ELF images (thanks to Vincent Palatin for this patch)drath2007-05-314-11/+218
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@161 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reworked image handling to support multiple sections (tested with ihex ↵drath2007-05-307-165/+201
| | | | | | | | | | file containing gaps) This checkin is still experimental, not recommended for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add missing file src/target/trace.hdrath2007-05-291-0/+34
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@157 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add missing image handling filesdrath2007-05-292-0/+419
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@156 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - split fileio handling into fileio part and image handlingdrath2007-05-2926-938/+2522
| | | | | | | | | | | - reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported) - added XScale debug handler binary to repository - added Thumb disassembling (thanks to Vincent Palatin for this patch) - added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported) This checkin is experimental, not suitable for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* -- corrected embedded ice definitionsntfreak2007-05-106-81/+8
| | | | | | -- changed arm966e to use standard arm9_7 reset handling git-svn-id: svn://svn.berlios.de/openocd/trunk@146 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - further work on ETB decoding (not yet functional)drath2007-05-054-14/+251
| | | | | | | - fixed several uses of uninitialized bits (Thanks to Vincent Palatin for finding and fixing these bugs) git-svn-id: svn://svn.berlios.de/openocd/trunk@145 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for Hitex comstick.ntfreak2007-04-281-7/+81
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@144 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - improved ETB trace outputdrath2007-04-267-13/+42
| | | | | | | | - use BKPT instruction on cores supporting it (ARM926EJ-S, ARM966E-S) - correctly handle endianness of software breakpoint instruction git-svn-id: svn://svn.berlios.de/openocd/trunk@143 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-25 14:06:57 +0000