summaryrefslogtreecommitdiff
path: root/doc
Commit message (Collapse)AuthorAgeFilesLines
...
* parport: add support for the jtag_khz command.Jonas Horberg2009-11-121-0/+36
| | | | | | | | | | | Add the khz and speed_div functions to the parport interface driver. Add the parport_toggling_time function that tells the parport driver how long (in nanoseconds) it takes for the hardware to toggle TCK. [dbrownell@users.sourceforge.net: tweak doc for clarity, mention multimeter, and whitespace fixes] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: MMU-aware init for memory read/writeDavid Brownell2009-11-101-5/+9
| | | | | | | | | | | | | | | | | | Start switching MMU handling over to a more sensible scheme. Having an mmu() method enables MMU-aware behaviors. Not having one kicks in simpler ones, with no distinction between virtual and physical addresses. Currently only a handful of targets have methods to read/write physical memory: just arm720, arm920, and arm926. They should all initialize OK now, but the arm*20 parts don't do the "extra" stuff arm926 does (which should arguably be target-generic). Also simplify how target_init() loops over all targets by making it be a normal "for" loop, instead of scattering its three parts to the four winds. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM11: remove old mrc/mcr commandsØyvind Harboe2009-11-101-19/+1
| | | | | | Switch to new commands in config scripts Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* finish removing deprecated/obsolete commandsDavid Brownell2009-11-091-86/+0
| | | | | | | | | | | | | | | | | | | | It's been about a year since these were deprecated and, in most cases, removed. There's no point in carrying that documentation, or backwards compatibility for "jtag_device" and "jtag_speed", around forever. (Or a few remnants of obsolete code...) Removed a few obsolete uses of "jtag_speed": - The Calao stuff hasn't worked since July 2008. (Those Atmel targets need to work with a 32KHz core clock after reset until board-specific init-reset code sets up the PLL and enables a faster JTAg clock.) - Parport speed controls don't actually work (tops out at about 1 MHz on typical HW). - In general, speed controls need to live in board.cfg files (or sometimes target.cfg files), not interface.cfg ... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's Guide: Flash/NAND doc tweaksDavid Brownell2009-11-091-3/+12
| | | | | | | | Rename the "Drivers, Options, and Commands" sections to be just "Driver List" matching the earlier reference. Add an example of parallel CFI flash. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's Guide: bugfix global state infoDavid Brownell2009-11-091-3/+1
| | | | | | | | | The "$ocd_HOSTOS" variable was wrongly documented. Fix its documentation, and its value on Linux. Shrink a few of the too-long lines. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target.cfg: remove "-work-area-virt 0"David Brownell2009-11-081-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The semantics of "-work-area-virt 0" (or phys) changed with the patch to require specifying physical or virtrual work area addresses. Specifying zero was previously a NOP. Now it means that address zero is valid. This patch addresses three related issues: - MMU-less processors should never specify work-area-virt; remove those specifications. Such processors include ARM7TDMI, Cortex-M3, and ARM966. - MMU-equipped processors *can* specify work-area-virt... but zero won't be appropriate, except in mischievous contexts (which hide null pointer exceptions). Remove those specs from those processors too. If any of those mappings is valid, someone will need to submit a patch adding it ... along with a comment saying what OS provides the mapping, and in which context. Example, say "works with Linux 2.6.30+, in kernel mode". (Note that ARM Linux doesn't map kernel memory to zero ...) - Clarify docs on that "-virt" and other work area stuff. Seems to me work-area-virt is quite problematic; not every operating system provides such static mappings; if they do, they're not in every MMU context... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's Guide: TAP setup tweakageDavid Brownell2009-11-051-6/+14
| | | | | | | | | | | Highlight that the "-expected-id" probably comes from vendor documentation, and that it *should* be used where possible. Don't use ircapture/irmask in examples, to help discourage use of those params when they're not required. Explain a bit better about why/when those params get used. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Release docs: fix notesDavid Brownell2009-11-041-7/+12
| | | | | | | | | | | We currently do something unusual: version codes in config.in get updated after the release, which means that "git describe" won't match up to development version labels. Comment that trouble spot. We can fix this by switching away from the major/minor/micro type release numbering, as various other projects have done. The major numbers basically don't tend to change, and doing a good job with micro versions is so annoying that they rarely change either.
* Doc: fix broken linkDavid Brownell2009-11-041-1/+1
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Other files: stop referring to ChangeLog tooDavid Brownell2009-11-041-3/+1
| | | | | | | The ChangeLog idiom is redundant given any decent SCM. Time to phase it out here. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Tweak release docsDavid Brownell2009-11-041-110/+172
| | | | | | | | | | | | | | | | | | Contrast releases to git snapshot tarballs. Mention that releases have some quality-improvement focus, with special non-"dev" version IDs. Explain more about version IDs, using "openocd -v" to see them, etc; Make release milestone info be less specific about timing, and presume we have both a merge window and an RC stage. Rework the release process information to match reality a bit more closely. Reference the version.sh script (in one place the wrong script was referenced). Bugfix branches get special treatment, while non-bugfix releases are more or less what *defines* being the mainline branch. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's Guide: more init info, autoprobing, etcDavid Brownell2009-11-011-6/+93
| | | | | | | | | | | | | Mention the autoprobing as a tool that may be useful when figuring out how to set up; and add a section showing how to use that mechanism (with an example). Strengthen the differences between config and run stage descriptions; add a section for the latter. Mention Dragonite. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Rewrite release script to use GIT.Zachary T Welch2009-10-271-136/+62
| | | | | | | | Update documentation to reflect GIT methodology. Rewrite release.sh script to use appropriate process. With this update, tools/release.sh can be used for producing private release tags on local branches. The documentation still needs work, but their use for v0.3.x should help rectify the deficiences.
* ARM: rename "arm9tdmi vector_catch" to "arm9 ..."David Brownell2009-10-251-9/+4
| | | | | | And update doc accordingly. That EmbeddedICE register was introduced for ARM9TDMI and then carried forward into most new chips that use EmbeddedICE.
* arm9tdmi vector_catch: reserved means "don't use"David Brownell2009-10-231-1/+3
| | | | | | | Bit 5 shouldn't be used. Remove all support for modifying it. Matches the exception vector table, of course ... more than one bootloader uses that non-vector to help distinguish valid boot images from random garbage in flash.
* ETM: rename registers, doc tweaksDavid Brownell2009-10-221-2/+17
| | | | | | | | | | | | | | | The register names are perversely not documented as zero-indexed, so rename them to match that convention. Also switch to lowercase suffixes and infix numbering, matching ETB and EmbeddedICE usage. Update docs to be a bit more accurate, especially regarding what the "trigger" event can cause; and to split the issues into a few more paragraphs, for clarity. Make "configure" helptext point out that "oocd_trace" is prototype hardware, not anything "real". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* mww_phys retired. Replaced by generic mww phys in target.cØyvind Harboe2009-10-211-51/+0
|
* virt2phys is now implemented by target.c globally, retire target specific ↵Øyvind Harboe2009-10-211-15/+0
| | | | documentation.
* Added target_read/write_phys_memory() fn's. mdX/mwX commands updated to ↵Øyvind Harboe2009-10-211-6/+10
| | | | support phys flag to specify bypassing of MMU.
* XSVF: use svf_add_statemove()David Brownell2009-10-201-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | XSVF improvements: - Layer parts of XSVF directly over SVF, calling svf_add_statemove() instead of expecting jtag_add_statemove() to conform to the SVF/XSVF requirements (which it doesn't). This should improve XSTATE handling a lot; it removes most users of jtag_add_statemove(), and the comments about how it should really do what svf_add_statemove() does. - Update XSTATE logic to be a closer match to the XSVF spec. The main open issue here is (still) that this implementation doesn't know how to build and submit paths from single-state transitions ... but now it will report that error case. - Update the User's Guide to mention the two utility scripts for working with XSVF, and to mention the five extension opcodes. Handling of state transition paths is, overall, still a mess. I think they should all be specified as paths not unlike SVF uses, and compiled to the bitstrings later ... so that we can actually make sense of the paths. (And see the extra clocks, detours through RUN, etc.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Added 'unlock' option to flash write_imageØyvind Harboe2009-10-201-3/+4
|
* Doc: jtag_init must validate scan chain tooDavid Brownell2009-10-191-0/+5
| | | | | Same requirement as like init_reset, and for the same reason: we need to start with a known and working state.
* doc updates to match "help" betterDavid Brownell2009-10-141-7/+35
| | | | | | | | | | | | | | | | | | | This makes the documentation a closer match to "help" output: - "pathmove" somehow was not documented in the User's Guide - "jtag_nsrst_assert_width" and "jtag_ntrst_assert_width" are new; both needed descriptions. - Removed two undocumented and fairly useless script mechanisms: * production/production_info/production_test ... using it, requires replacing everything; so having it adds no value. * cpu ... way out of date; hopeless to keep that current Note that anyone using that "production" stuff already defines their own procedures, and can keep using them with no change. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Retired gdb_attach. gdb-detach event covers this functionality.Øyvind Harboe2009-10-131-5/+0
|
* arm11 burst writes are now only enabled for writes larger than 1 word. ↵Øyvind Harboe2009-10-121-1/+5
| | | | Single word writes are frequently used from reset init scripts to non-memory peripherals.
* Retire arm11 no_increment. Intended for future expansion to read/write to ↵Øyvind Harboe2009-10-121-7/+0
| | | | ports. New arm11 commands would have to be added to exploit it.
* tweak new "translating ..." textDavid Brownell2009-10-091-16/+18
| | | | | | | | Fix formatting and layout bugs in the new "translating configuration files" bit. Make it a section within the chapter about config files. Add a crossreference. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* add documentation about reset customizationDavid Brownell2009-10-091-12/+108
| | | | | | | | | | We added two overridable procedures; document them, and the two jtag arp_* operations they necessarily expose. Update the comment about the jtag_init_reset() routine; it's been obsolete for as long as it's had SRST support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Added tip in documentation on how to translate quirky syntaxØyvind Harboe2009-10-091-1/+41
|
* Houston, we have Mirror!David Brownell2009-10-071-0/+6
|
* Change most in-tree references from SVN to GIT.dbrownell2009-10-085-125/+65
| | | | | | | | | Also, talk about "mainline" not "trunk". The release.txt and release.sh files need more updates. git-svn-id: svn://svn.berlios.de/openocd/trunk@2825 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove pointless "target library" chapter.dbrownell2009-10-071-36/+84
| | | | | | | | | It had a very little bit of content; move that to the more extensive chapter on config file guidelines, and give more current "ls" output to show the available library code. git-svn-id: svn://svn.berlios.de/openocd/trunk@2820 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Note bug in handling of variables through command line parameters.dbrownell2009-10-071-0/+8
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2819 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Updates for "reset_config":dbrownell2009-10-071-6/+22
| | | | | | | | | | | - revert to previous default: don't talk JTAG during SRST - add "srst_nogates" flag, the converse of "srst_gates_jtag" - with no args, display the current configuration And update the User's Guide text with bullet lists to be a bit more clear. git-svn-id: svn://svn.berlios.de/openocd/trunk@2818 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Change version labels to work better with GITdbrownell2009-10-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | - The guess-rev.sh script is now a tweaked version of "setlocalversion" as seen in Linux, U-Boot, and various other projects. When it finds source control support (git, hg, svn) it uses IDs from there. Else (specific to this project) it reports itself as "-snapshot", e.g. from gitweb. I verified this new "guess-rev.sh" script runs under Cygwin. - Also update the generic version strings to be like "0.3.0-dev" (during development) instead of the very long "0.3.0-in-development". These also show up in the PDF docs. For better tracking, we might eventually change these strings to include the version IDs too. - Change the startup banner version strings so they include the guess-rev output. Development and release versions with GIT will be like Open On-Chip Debugger 0.3.0-dev-00282-g7191a4f-dirty (2009-10-05-20:57) Open On-Chip Debugger 0.3.0 (2009-10-05-20:57) instead of the previous SVN-specific (even when using git-svn!) Open On-Chip Debugger 0.3.0-in-development (2009-10-05-01:39) svn:exported Open On-Chip Debugger 0.3.0 (2009-10-05-01:39) Release git-svn-id: svn://svn.berlios.de/openocd/trunk@2809 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add a new JTAG "setup" event; use for better DaVinci ICEpick support.dbrownell2009-10-051-6/+22
| | | | | | | | | | | | | | | | | The model is that this fires after scanchain verification, when it's safe to call "jtag tapenable $TAPNAME". So it will fire as part of non-error paths of "init" and "reset" command processing. However it will *NOT* trigger during "jtag_reset" processing, which skips all scan chain verification, or after verification errors. ALSO: - switch DaVinci chips to use this new mechanism - log TAP activation/deactivation, since their IDCODEs aren't verified - unify "enum jtag_event" scripted event notifications - remove duplicative JTAG_TAP_EVENT_POST_RESET git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Minor ETB and ETM bugfixes and doc updatesdbrownell2009-10-021-5/+29
| | | | | | | | | | | | | | | | | | | | | - ETB * report _actual_ hardware status, not just expected status * add a missing diagnostic on a potential ETB setup error * prefix any diagnostics with "ETB" - ETM * make "etm status" show ETM hardware status too, instead of just traceport status (which previously was fake, sigh) - Docs * flesh out "etm tracemode" docs a bit * clarify "etm status" ... previously it was traceport status * explain "etm trigger_percent" as a *traceport* option ETM+ETB tracing still isn't behaving, but now I can see that part of the reason is that the ETB turns itself off almost immediately after being enabled, and before collecting any data. git-svn-id: svn://svn.berlios.de/openocd/trunk@2790 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Update release process documentation.zwelch2009-09-301-26/+49
| | | | | | | | | - Improve and clarify the wording of the introduction. - Add section on version taggging. - Some other minor corrections. git-svn-id: svn://svn.berlios.de/openocd/trunk@2788 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Document and automate signature creation for the release archives.zwelch2009-09-301-1/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2783 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* ARM11 command handling fixesdbrownell2009-09-291-1/+14
| | | | | | | | | | | - Commands were supposed to have been "arm11 memwrite ..." not "memwrite ..." - Get rid of obfuscatory macros - Re-alphabetize - Add docs for "arm11 vcr" git-svn-id: svn://svn.berlios.de/openocd/trunk@2776 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Make "-expected-id 0" suppress warnings; not unlike it used to do.dbrownell2009-09-291-3/+5
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2775 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Doc updates: add section on target software changes, minor fixesdbrownell2009-09-291-5/+53
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2774 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* httpd smoketest infooharboe2009-09-291-1/+10
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2769 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* spelling fixoharboe2009-09-281-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2766 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Streamline Capture-IR handling and integrity test.dbrownell2009-09-261-10/+12
| | | | | | | | | | | | | | | | | | | | Change the handling of the "-ircapture" and "-irmask" parameters to be slightly more sensible, given that the JTAG spec describes what is required, and that we already require that conformance in one place. IR scan returns some bitstring with LSBs "01". - First, provide and use default values that satisfy the IEEE spec. Existing TAP configs will override the defaults, but those parms are no longer required. - Second, warn if any TAP gets set up to violate the JTAG spec. It's likely a bug, but maybe not; else this should be an error. Improve the related diagnostics to say which TAP is affected. And associated minor fixes/cleanups to comments and diagnostics. git-svn-id: svn://svn.berlios.de/openocd/trunk@2758 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* When setting up an ETM, cache its ETM_CONFIG register. Thendbrownell2009-09-231-2/+38
| | | | | | | | | | | | | | | | | | | | | | | | | only expose the registers which are actually present. They could be missing for two basic reasons: - This version might not support them at all; e.g. ETMv1.1 doesn't have some control/status registers. (My sample of ARM9 boards shows all with ETMv1.3 support, FWIW.) - The configuration on this chip may not populate as many registers as possible; e.g. only two data value comparators instead of eight. Includes a bugfix in the "etm info" command: only one of the two registers is missing on older silicon, so show the first one before bailing. Update ETM usage docs to explain that those registers need to be written to configure what is traced, and that some ETM configs are not yet handled. Also, give some examples of the kinds of constrained trace which could be arranged. git-svn-id: svn://svn.berlios.de/openocd/trunk@2752 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Make it easier to erase or protect through to the enddbrownell2009-09-221-6/+12
| | | | | | | | | | | | of a (NOR) flash chip: allow passing "last" as an alias for the number of the last sector. Improve several aspects of error checking while we're at it. From: Johnny Halfmoon <jhalfmoon@milksnot.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@2746 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Update presentation of TAP events and tap enable/disable.dbrownell2009-09-211-31/+77
| | | | | | | | | Highlight that the "post-reset" event kicks in before the scan chain is validated, which limits what can be done in a post-reset handler. git-svn-id: svn://svn.berlios.de/openocd/trunk@2745 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove annoying end-of-line whitespace from doc/* files.dbrownell2009-09-2115-131/+131
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2744 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-18 02:25:42 +0000