summaryrefslogtreecommitdiff
path: root/src/flash/nor
Commit message (Collapse)AuthorAgeFilesLines
* str71x: fix previous commitSpencer Oliver2010-05-041-3/+4
| | | | | | fix build issue with 70226c221f5879bb6126ff3f2ec9ae64c68d80d6 commit Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* flash: less bogus errorsØyvind Harboe2010-05-047-8/+8
| | | | | | | Removed bogus errors when trying to allocate a large a target memory buffer as possible. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* str7x: fix bogus error messagesØyvind Harboe2010-05-041-3/+5
| | | | | | | | Remove bogus error messages when trying to allocate a large chunk of target memory and then falling back to a smaller one. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cfi: made som info output debug outputØyvind Harboe2010-05-041-2/+2
| | | | | | | E.g. how much target memory that is used during flashing is debug info. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* STM32 flash erase timeout fixTobias Ringström2010-05-031-2/+2
| | | | | | | | | | | | | | | The current timeout for STM32 flash block erase and flash mass erase is 10 (ms), which is too tight, and fails around 50% of the time for me. The data sheet for STM32F107VC specifies a maximum erase time of 40 ms (for both operations). I'd also consider it a bug that the code does not detect a timeout, but just assumes that the operation has completed. The attached patch does not address this bug. The attached patch increases the timeouts from 10 to 100 ms. Please apply. /Tobias
* flash: write_image would fail for certain imagesØyvind Harboe2010-04-291-14/+55
| | | | | | | | | | | Fix a bug where write_image would fail if the sections in the image were not in ascending order. This has previously been fixed in gdb load. Solved by sorting the image sections before running flash write_image erase unlock foo.elf. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* flash: write_image will now pad erase to nearest sectorØyvind Harboe2010-04-291-8/+2
| | | | | | | | | | this is done for unlocking and it is a simple omission that it wasn't done for sectors. The unnerving thing is that nobody has complained about this until now.... Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* nor: remove bogus output about padding sectionsØyvind Harboe2010-04-281-1/+2
| | | | | | | padding of 0 bytes is actually no padding, do not output warning about padding in that case. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* stm32x: allow flash probe on a running targetAndreas Fritiofson2010-04-201-6/+0
| | | | | | | | | | | | | | | If the flash has not yet been probed and GDB connects while the target is running, the flash probe triggered by GDB's memory map read will fail. In that case the returned memory map will be empty, causing a subsequent load from within GDB to fail. There's not much you can do from GDB to recover, other than a restart; a 'mon reset init' and manual 'mon flash probe' won't help since GDB has already made up its mind about the memory map. It seems there's no reason to require the target to be halted when probing the flash. Remove the check to let a valid memory map be provided to GDB even when connecting to a running target. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
* NOR/core bugfix: restore invariantsDavid Brownell2010-04-151-5/+16
| | | | | | | | | | | | | | | | The The patch labeled "CFI CORE: bug-fix protect single sector" was merged rged without some requested bugfixes. Most significantly it broke invariants in the code, invalidating descriptions and changing the calling convention for underlying drivers. (It (Also wasn't CFI-specific...) Fix that, and Include an update from Antonio Borneo for the degenerate "nothing to do" case, (although that's still in the wrong location. which is presumably why that is it was working in some cases but not all.) src/flash/nor/core.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR/CFI: remove redundant codeAntonio Borneo2010-04-151-6/+2
| | | | | | | | Arguments for "flash bank" command are already parsed and put in "bank" struct. Removed code to parse them again. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NOR/CFI: fix order of arguments checkAntonio Borneo2010-04-151-2/+2
| | | | | | | | | | | | Syntax of "flash bank" command requires: - chip_width as CMD_ARGV[3] - bus_width as CMD_ARGV[4] Actual code swaps the arguments. Bug has no run time impact since wrong variables are only used to check value and both are checked against same constraint. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NOR/TMS470: review scope of symbolsAntonio Borneo2010-04-111-7/+7
| | | | | | Add "static" qualifier to private functions and data. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NOR/CFI: review scope of functionsAntonio Borneo2010-04-101-3/+3
| | | | | | Add "static" qualifier to private functions. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NOR/STR7X: review scope of dataAntonio Borneo2010-04-101-2/+2
| | | | | | Add "static" qualifier to private data. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NOR/ADUC702X: review scope of dataAntonio Borneo2010-04-101-1/+1
| | | | | | Add "static" qualifier to private data. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NOR/AVRF: review scope of dataAntonio Borneo2010-04-101-1/+1
| | | | | | Add "static" qualifier to private data. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NOR/CORE: review scope of dataAntonio Borneo2010-04-101-1/+1
| | | | | | Add "static" qualifier to private data. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NOR/DRIVERS: review scope of functionsAntonio Borneo2010-04-101-1/+1
| | | | | | | Add "static" qualifier to private functions. Remove unused "extern" in src/ecosboard.c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* STR9XPEC: review scope of functionsAntonio Borneo2010-04-101-1/+1
| | | | | | Add "static" qualifier to private functions. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* TCL: review scope of functionsAntonio Borneo2010-04-102-3/+1
| | | | | | Add "static" qualifier to private functions. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* NOR TCL: fix usage messageAntonio Borneo2010-03-261-1/+1
| | | | | | | | The command "flash bank" has updated syntax. Add the mandatory parameter <target> to the usage message that prints in case of error. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
* change %x and %d to PRIx32 and PRId32 where needed for cygwinDaniel Bäder2010-03-251-1/+1
|
* jtag: move towards making out_value constØyvind Harboe2010-03-201-3/+4
| | | | | | | These were relatively straightforward fixes which are backwards compatible. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* PIC32MX: add unlock cmdSpencer Oliver2010-03-181-0/+75
| | | | | | | 'unlock' performs a full unlock/erase of the device, removing any code protection. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* jtag: cut down on usage of unintended modification of global end stateØyvind Harboe2010-03-181-13/+13
| | | | | | | | | | | | | jtag_get/set_end_state() is now deprecated. There were lots of places in the code where the end state was unintentionally modified. The big Q is whether there were any places where the intention was to modify the end state. 0.5 is a long way off, so we'll get a fair amount of testing. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* image loading: fix problem with offsets > 0x80000000Bradey Honsinger2010-03-161-1/+1
| | | | | | | | | | | | | | | Fixes bug that prevented users from specifying a base address of 0x80000000 or higher in image commands (flash write_image, etm image, xscale trace_image). image.base_address is an offset from the start address contained in the image file (if there is one), or from 0 (for binary files). As a signed 32-bit int, it couldn't be greater than 0x7fffffff, which is a problem when trying to write a binary file to flash above that address. Changing it to a 64-bit long long keeps it as a signed offset, but allows it to cover the entire 32-bit address space. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* PIC32: add flash algorithm supportSpencer Oliver2010-03-102-468/+227
| | | | | | | | | | | | | Add flash algorithm support for the PIC32MX. Still a few things todo but this dramatically decreases the programing time, eg. approx programming for 2.5k test file. - without fastload: 60secs - with fastload: 45secs - with fastload and algorithm: 2secs. Add new devices to supported list. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* STM32: flash loader cleanupSpencer Oliver2010-03-101-12/+25
| | | | | | - make algorithm array static const. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* STR7: flash loader cleanupSpencer Oliver2010-03-101-14/+30
| | | | | | | - make algorithm array static const. - increase algorithm buffer size to 32k. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* STR9: flash loader cleanupSpencer Oliver2010-03-102-8/+19
| | | | | | | - make algorithm array static const. - increase algorithm buffer size to 32k. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* ADUC702x: flash loader cleanupSpencer Oliver2010-03-101-1/+1
| | | | | | - make algorithm array static const. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* CFI CORE: bug-fix protect single sectorAntonio Borneo2010-03-091-2/+2
| | | | | | | | Cannot protect or unprotect single sector in cfi flash. When first==last the procedure fails. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cfi: simplify and clearify codeAntonio Borneo2010-03-081-149/+75
| | | | | | | | | | | | | | | | At the end I have added comments /* FIXME: to be removed */ There are 3 lines in which my simplification is not complete due to data dependency with LOG_DEBUG() messages visible in the patch. Such log_debug has been introduced on Jan 22, 2007 with commit 4fc97d3f2726efa147cfdb0c456eace51550e1e3 during development activity in this file/procedure. From my point of view, these logs can be removed, since not part of a consistent flow of information. Alternatively, could be borrowed in the new cfi_send_command(), but this will increase verbosity. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: jtag_add_ir_scan() now takes a single fieldØyvind Harboe2010-03-081-1/+1
| | | | | | | | In the code a single field was all that was ever used. Makes jtag_add_ir_scan() simpler and leaves more complicated stuff to jtag_add_plain_ir_scan(). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: retire tap fieldØyvind Harboe2010-03-081-30/+15
| | | | | | | | | | | | | | | | | jtag_add_dr/ir_scan() now takes the tap as the first argument, rather than for each of the fields passed in. The code never exercised the path where there was more than one tap being scanned, who knows if it even worked. This simplifies the implementation and reduces clutter in the calling code. use jtag_add_ir/dr_plain_scan() for more fancy situations. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* CFI: review print of Voltage valuesAntonio Borneo2010-03-061-6/+6
| | | | | | | | | | | | JEDEC standard reports Vpp integer part encoded as 4 bit HEX value. To print it using decimal digits, %u is required. Other voltage values are coded as BCD, so %x is appropriate. Code already prints one nibble at a time, so no need for field width and precision in format string. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* NOR: trim range in flash_driver_protect()David Brownell2010-03-031-0/+57
| | | | | | | | | | | | | | | | | | | | | | When the beginning or end of the specified range of sectors already has the requested protection status, don't ask the flash driver to change those sectors. This will among other things turn command sequences like this into the NOPs one would expect: flash protect_check 0 flash info 0 ... reports everything as unprotected ... flash protect 0 0 1 off That speeds things up (by whatever work was just avoided). Also, with Stellaris (which can't unprotect flash at page level) this can eliminate some undesirable/false error reports. (And finishes fixing a bug currently listed in our bug database...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR: invalidate cached state on target resumeDavid Brownell2010-03-032-0/+35
| | | | | | | | | | | | | | | | | | | | The NOR infrastructure caches some per-sector state, but it's not used much ... because the cache is not trustworthy. This patch addresses one part of that problem, by ensuring that state cached by NOR drivers gets invalidated once we resume the target -- since targets may then modify sectors. Now if we see sector protection or erase status marked as anything other than "unknown", we should be able to rely on that as being accurate. (That is ... if we assume the drivers initialize and update this state correctly.) Another part of that problem is that the cached state isn't much used (being unreliable, it would have been unsafe). Those issues can be addressed in later patches. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR: stellaris message tweaksDavid Brownell2010-03-031-4/+4
| | | | | | | | | | | | | | | Give a more accurate failure message when trying to unprotect; don't complain about pages being write protected, just say that unprotect is not supported by the hardware ... referencing the new "recover" command, which is the way to achieve that. Likewise, when trying to protect, talk about "pages" (matching hardware doc) not "sectors" (an concept that's alien to these chips). Also make the helptext for the "recover" command mention that it also erases the device. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* STM32: Add Value Line Flash Programming SupportSpencer Oliver2010-03-031-0/+36
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* LPC1768 updates, IAR board supportDavid Brownell2010-03-021-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix some issues with the generic LPC1768 config file: - Handle the post-reset clock config: 4 MHz internal RC, no PLL. This affects flash and JTAG clocking. - Remove JTAG adapter config; they don't all support trst_and_srst - Remove the rest of the bogus "reset-init" event handler. - Allow explicit CCLK configuration, instead of assuming 12 MHz; some boards will use 100 Mhz (or the post-reset 4 MHz). - Simplify: rely on defaults for endianness and IR-Capture value - Update some comments too Build on those fixes to make a trivial config for the IAR LPC1768 kickstart board (by Olimex) start working. Also, add doxygen to the lpc2000 flash driver, primarily to note a configuration problem with driver: it wrongly assumes the core clock rate never changes. Configs that are safe for updating flash after "reset halt" will thus often be unsafe later ... e.g. for LPC1768, after switching to use PLL0 at 100 MHz. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* stellaris: recover_command use usleep rather than sleepSpencer Oliver2010-02-281-1/+1
| | | | | | | windows api does not define a posix sleep, use usleep that has an openocd wrapper to the win32 native function. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* ARMv7M: use software breakpoints for algorithmsSpencer Oliver2010-02-284-8/+4
| | | | | | | | - armv7m_run_algorithm now requires all algorithms to use a software breakpoint at their exit address - updated all algorithms to support this Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* new "stellaris recover" commandDavid Brownell2010-02-271-0/+66
| | | | | | | | | | | | | | | Stellaris chips have a procedure for restoring the chip to what's effectively the "as-manufactured" state, with all the non-volatile memory erased. That includes all flash memory, plus things like the flash protection bits and various control words which can for example disable debugger access. clearly, this can be useful during development. Luminary/TI provides an MS-Windows utility to perform this procedure along with its Stellaris developer kits. Now OpenOCD users will no longer need to use that MS-Windows utility. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* AVR flash: handle AT90CAN128 chipsHans Peter Mortensn2010-02-241-4/+26
| | | | | | | | | I have successfully programmed the AT90CAN128, based on the mega128   with some small modifications. [ dbrownell@users.sourceforge.net: patch cleanup ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* STR9xpec: issue warning when unlocking deviceSpencer Oliver2010-02-121-0/+8
| | | | | | | Issue warning to user when unlocking or writing the option bytes. The new settings will not take effect until a target reset. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* STM32x: issue warning when unlocking device (bug #16)Spencer Oliver2010-02-121-2/+6
| | | | | | | Issue warning to user when unlocking or writing the option bytes. The new settings will not take effect until a target reset. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* flash/str7x: After reset init the flash is unlockedEdgar Grimberg2010-02-021-2/+14
| | | | | | | | | | | | | | The default state of the STR7 flash after a reset init is unlocked. The information in the flash driver now reflects this. The information about the lock status cannot be read from the flash chip, so the user is informed that flash info might not contain accurate information. [dbrownell@users.sourceforge.net: line length shrinkage] Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR: cleanup driver declsDavid Brownell2010-01-2918-202/+200
| | | | | | Fix goofy struct indents. Function names *are* their addresses. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-19 10:04:24 +0000