summaryrefslogtreecommitdiff
path: root/src/target/Makefile.am
Commit message (Collapse)AuthorAgeFilesLines
* cortex a9: merge cortex a9 and a8 codeØyvind Harboe2011-03-221-3/+1
| | | | | | better to keep this in a single file. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cortex_a9: add source files for Cortex A9 support.Aaron Carroll2011-01-311-1/+3
| | | | | | add target and build support for A9 Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
* build: add common.mkSpencer Oliver2010-11-181-4/+1
| | | | | | | Rather than specifying common makefile variables move them all to a common.mk. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* arm964e: Add support for ARM946E target.ddraskovic2010-11-041-0/+2
| | | | | | | | | | | | | | | | | So far most of the people have been using existing ARM966E in the place of ARM946E, because they have practically the same scan chains. However, ARM946E has caches, which further complicates JATG handling via scan-chain. this was preventing single-stepping for ARM946E when SW breakpoints are used. This patch thus introduces : 1) Correct cache handling on memory write 2) Possibility to flush whole cache and turn it off during debug, or just to flush affected lines (faster and better) 3) Correct SW breakpoint handling and correct single-stepping 4) Corrects the bug on CP15 read and write, so CP15 values are now correctly R/W
* avr32: work-in-progressOleksandr Tymoshenko2010-08-151-0/+7
| | | | | | | | | | | | | committed so as to ease cooperation and to let it be improved over time. So far it supports: - halt/resume - registers inspection - memory inspection/modification I'm still getting up to speed with OpenOCD internals and AVR32 so code is a little bit messy and I'd appreciate any feedback.
* ADIv5 transport support moves to separate filesDavid Brownell2010-03-161-0/+2
| | | | | | | | | | | | | | | | | | | Unclutter arm_adi_v5.c by moving most transport-specific code to a transport-specific files adi_v5_{jtag,swd}.c ... it's not a full cleanup, because of some issues which need to be addressed as part of SWD support (along with implementing the DAP operations on top of SWD transport): - The mess where mem_ap_read_buf_u32() is currently coded to know about JTAG scan chains, and thus needs rewriting before it will work with SWD; - Initialization is still JTAG-specific Also move JTAG_{DP,ACK}_* constants from adi_v5.h to the JTAG file; no other code should care about those values. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Packaging fixDavid Brownell2009-12-211-0/+1
| | | | | | Don't forget to list target/arm_opcodes.h Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: add basic dsp563xx supportmkdorg@users.sourceforge.net2009-12-151-1/+5
|
* build: add build/src to include pathØyvind Harboe2009-12-081-1/+2
| | | | | | This allows including generated include files. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ARM: use <target/arm.h> not armv4_5.hDavid Brownell2009-12-071-0/+1
| | | | | | | | | | | | | | Move most declarations in <target/armv4_5.h> to <target/arm.h> and update users. What's left in the older file is stuff that I think should be removed ... the old register cache access stuff, which makes it awkward to support microcontroller profile (Cortex-M) cores. The armv4_5_run_algorithm() declaration was moved too, even though it's not yet as generic as it probably ought to be. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* basic ARM semihosting supportNicolas Pitre2009-12-031-0/+2
| | | | | | | | | | | | | | | | | | | | Semihosting enables code running on an ARM target to use the I/O facilities on the host computer. The target application must be linked against a library that forwards operation requests by using the SVC instruction that is trapped at the Supervisor Call vector by the debugger. The "hosted" library version provided with CodeSourcery's Sourcery G++ Lite for ARM EABI is one example. This is currently available for ARM9 processors, but any ARM variant should be able to support this with little additional work. Tested using binaries compiled with Sourcery G++ Lite 2009q1-161 and ARM RVCT 3.0. [dbrownell@users.sourceforge.net: doc tweaks, NEWS] Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* remove tertiary include pathsZachary T Welch2009-12-031-4/+1
| | | | | With all #include directives converted, we only need to have the top-level src/ directory in the search path.
* allow #include directives to use module nameZachary T Welch2009-12-031-0/+1
| | | | | | | | | | | | Includes the src directory in the search path, so header files may be migrated from: #include "foo.h" to #include <module/foo.h> which is more conducive for installation.
* feroceon.c should be part of ARM7_9_SRCNicolas Pitre2009-12-031-2/+2
| | | | | | | The Feroceon and Dragonite cores are similar to the ARM926 and ARM966 cores respectively. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* adding files required for distributionZachary T Welch2009-12-021-0/+1
| | | | | Add headers missing from Makefile rules to pass 'make distcheck'. These were included in the tree but were not added with those commits.
* add 'testee' target typeZachary T Welch2009-11-251-1/+2
| | | | | | | Alliteration aside, this should provide the final piece of the puzzle for developers that want to get started writing a new target type. In this way, it also seeks to complement the 'dummy' interface driver and 'faux' NOR flash driver.
* ARM: new DPM interfaceDavid Brownell2009-11-241-0/+2
| | | | | | | | | | | | | | | | | | | First version of interface for sharing code between ARMv6 and ARMv7a debug modules ... now the architecture includes debug support. (Not the same as for the trimmed-down v7m or v6m though!) This is a first version of an interface that will let the ARM11 and Cortex-A8 support share code, features, and bugfixes. Based on existing code from both of those cores. The ARM v7-AR architecture specification calls this commonality the "Debug Programmer's Model (DPM)", which seemed to be an appropriate acronym -- a TLA even! -- for use in our code. Made it so. :) The initial scope of this just supports register access, and is geared towards supporting top level "struct arm" mechanisms. Later, things like breakpoint and watchpoint support should be included. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* split startup.tcl file across modulesZachary T Welch2009-11-181-1/+3
| | | | | | | Moves definitions for each layer into their own file, eliminating layering violations in the built-in TCL code. Updates src/Makefile.am rules to include all files in the final startup.tcl input file, and others Makefile.am rules to distribute the new files in our packages.
* makefiles: improve build orderZachary T Welch2009-11-111-51/+76
| | | | | | | | | | | Separates various groups of files to be built in logical succession. In each layer, the core module (target.c, nand.c, etc.) is built _after_ their helper modules (e.g. image.c, nand_ecc.c) but _before_ any of their drivers (e.g. arm966e.c, mx3_nand.c). This allows problems introduced at the bottom of the stack to result in build failures as soon as possible, as the helpers and core should wrap portions of them.
* Improve Makefile rules for XScale debug handler; fixes 'make distcheck'.Zachary T Welch2009-10-191-5/+8
|
* build tweak for bin2charDavid Brownell2009-10-171-3/+4
| | | | | | Work better when building outside the source tree. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* xscale: better fix for debug_handler.binDavid Brownell2009-10-161-5/+7
| | | | | | | | | | | | | Generate a C struct with the data, and use that, instead of an assembly language file. The assembly language causes issues on Darwin and MS-Windows, which don't necessarily use GNU AS; or if they do, don't necessarily use its ELF syntax. It's also better in two other ways: fewer global symbols; and the init-time size check gets optimized away at compile time. (Unless it fails, in which case bigger chunks of the file vanish.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Fix problems building xscale_debug.SDavid Brownell2009-10-141-0/+6
|
* simplify XScale debug handler installationDavid Brownell2009-10-121-1/+1
| | | | | | | | | | | | | | | | | | | Load the XScale debug handler from the read-only data section instead of from a separate file that can get lost or garbaged. This eliminates installation and versioning issues, and also speeds up reset handling a bit. Plus some minor bits of cleanup related to loading that handler: comments about just what this handler does, and check fault codes while writing it into the mini-icache. The only behavioral changes should be cleaner failure modes after errors during handler loading, and being a bit faster. NOTE: presumes GNU assembly syntax, with ".incbin"; and ELF, because of the syntax of the ".size" directive. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Remove annoying end-of-line whitespace from most src/*dbrownell2009-09-211-1/+1
| | | | | | | files; omitted src/httpd git-svn-id: svn://svn.berlios.de/openocd/trunk@2742 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell Subset of Cortex-A8 support from Magnus: create an armv7a fileoharboe2009-08-251-0/+2
| | | | | | | | | | | | | | | | | | | and seed it with DAP access support using the current ADIv5 code. (With tweaks and cleanup from Øyvind and Dave.) The ARMv7-AR architecture manual is not publicly available (even in subset form like the ARMv7-M spec), so it's hard to distinguish between the Cortex-A8 implementation and the ARMv7-A architecture. The register set presumably is architectural, and so it's stored here; it's like earlier ARMs, with small additions. Ditto the instruction set, though Thumb2 support is used (extending Thumb support from ARMv6 with more 32-bit instructions) and there's this ThumbEE thing too. There is a new "debug monitor" mode, not yet fully addressed here, to support debugging in environments (like motor control) where halting debug mode is inadvisable. git-svn-id: svn://svn.berlios.de/openocd/trunk@2608 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Paulius Zaleckas <paulius.zaleckas@gmail.com>:zwelch2009-06-191-0/+1
| | | | | | | | | | | This is minimal patch to support FA526 ARMv4 compatible core. Since it is very similar to ARM920T I tried to reuse as much code as possible. CPU and board configs will follow soon. git-svn-id: svn://svn.berlios.de/openocd/trunk@2292 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Fix make maintainer-clean for out-of-tree builds.zwelch2009-06-091-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2172 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Final step in isolating target_type_s structure:zwelch2009-05-311-0/+1
| | | | | | | | | - Move definition of 'struct target_type_s' into new 'target_type.h' file. - Forward delclaration remains in target.h, with comment pointing to new file. - Replaces #define with #include in source files. git-svn-id: svn://svn.berlios.de/openocd/trunk@1971 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Whitespace-only updates to automake input files:zwelch2009-05-311-10/+80
| | | | | | | | - use continuations to break long lines of variable assignments - makes these variables more patch-friendly and conform to style guide git-svn-id: svn://svn.berlios.de/openocd/trunk@1970 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Move TCL script files -- Step 1 of 2:zwelch2009-05-271-9/+0
| | | | | | | | | | | | | - Move src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am: - Add dist-hook to include such files under src/tcl in the distribution. - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'. - Add uninstall-hook to remove the installed script files. - Change paths to (un)install script files in '$(pkgdatadir)/scripts'. git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Extend autotools build to create shared library libopenocd with libtool:zwelch2009-05-101-2/+3
| | | | | | | | | | | - Add libtoolize step too bootstrap script; creates ltmain.sh script. - Add AC_PROG_LIBTOOL to configure.in to add libtool support to build. - Change Makefile.am library rules from static (_a) to libtool (_la). - Install libopenocd.{la,so,a} in $(libdir); update openocd link rules. - Extend MAINTAINERCLEANFILES in top-level Makefile.am to remove ltmain.sh. git-svn-id: svn://svn.berlios.de/openocd/trunk@1695 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Dirk Behme <dirk.behme@googlemail.com> Add minimalist Cortex A8 fileoharboe2009-05-041-2/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1602 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Update autotools scripts to require automake 1.6. The configure.in scriptzwelch2009-05-021-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | already required autoconf 2.59 (circa 2006), so there is no reason to support versions of automake older than 1.6 (circa 2002). The first part of this patch upgrades the configure.in script: 1. Use current calling conventions for the AC_INIT and AM_INIT_AUTOMAKE macros, bringing their usage up-to-date with the version of autoconf already specified by AC_PREREQ. 2. Add AC_CONFIG_SRCDIR macro, required by new version of AC_INIT. 3. Automatically enable all of automake's warnings except Makefile portability (which OpenOCD violates by using GNU make's $(wildcard)). [[ While automake has its own -Werror option, I did not enabled it due to existing warnings. ]] 4. Add the missing AM_PROG_C_O check, required by the build rules for openocd.o in src/Makefile.am. 5. Adjust version number to show progress toward the next release. 6. Include a bug reporting e-mail address to direct users to this list. This patch makes the following adjustments to the Makefile.am files: 1. Update AUTOMAKE_OPTIONS to require automake version 1.6 2. Rewrite all deprecated INCLUDES assignments as AM_CPPFLAGS 3. Clean-up all AM_CPPFLAGS declarations to be patch-friendly. 4. Remove vestigial references to $(all_includes) 5. Remove erroneous references to @CPPFLAGS@ (only use AM_CPPFLAGS) 6. Remove unused -I and -D directives in helper/, flash/, target/ git-svn-id: svn://svn.berlios.de/openocd/trunk@1591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* SimonQian <simonqian@simonqian.com> AVR wipoharboe2009-04-271-2/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1540 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Changed armv7m and cortexm3 to use nev arm_adi_v5 instead of cortex_swjdp.mlu2009-04-271-2/+2
| | | | | | Added support for accessport ROM table identification, dap command. git-svn-id: svn://svn.berlios.de/openocd/trunk@1536 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* chain position is now required when creating a targetoharboe2009-01-281-0/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1363 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Fix 'make maintainer-clean' courtesy of Zach Welch <zw@superlucidity.net>kc8apf2009-01-201-0/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1345 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* jtag newtap change & huge manual updateduane2008-11-301-24/+9
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Alan Carvalho de Assis <acassis@gmail.com> imx27 config fileoharboe2008-11-021-1/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1122 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Rick Altherr <kc8apf@kc8apf.net> switch to new syntax for target eventsoharboe2008-10-311-8/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* remove duplicate targetoharboe2008-10-211-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1084 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* testing of syntax error in reset and at startupoharboe2008-10-141-1/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1054 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* John McCarthy <jgmcc@magma.ca> openocd-usb.cfg addedoharboe2008-10-101-1/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1038 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* zy1000 1.44 snapshotoharboe2008-10-091-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1034 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* John McCarthy <jgmcc@magma.ca> adds support for DMA mode access as supported ↵oharboe2008-10-081-2/+2
| | | | | | by EJTAG 1.0/2.0 processors git-svn-id: svn://svn.berlios.de/openocd/trunk@1029 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* s3c2440 OpenMoko target scriptoharboe2008-09-041-1/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@978 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* lm3s3748 config fileoharboe2008-08-201-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@954 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* added wip imx31.cfg fileoharboe2008-08-191-0/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@931 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* deleted superfluous sam7s256 which was identical to sam7x256oharboe2008-08-171-2/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@924 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-09 12:59:45 +0000