summaryrefslogtreecommitdiff
path: root/src/target/target.c
Commit message (Collapse)AuthorAgeFilesLines
* Michael Fischer spotted a problem in the reset routines for srst_pulls_trst. ↵oharboe2008-05-091-0/+17
| | | | | | | | It is a bit of a mystery why this was only visible w/LPC2148. Embedded ICE registers are now set up after SRST pulls TRST. git-svn-id: svn://svn.berlios.de/openocd/trunk@650 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Added checks for target->type->read/write_memory, soft_reset_halt and ↵oharboe2008-04-151-0/+53
| | | | | | run_algorithm that the target has been examined. git-svn-id: svn://svn.berlios.de/openocd/trunk@581 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* target read/write is no longer attempted for target_xxx() functions when the ↵oharboe2008-04-151-4/+49
| | | | | | target has not been examined(fails w/error). git-svn-id: svn://svn.berlios.de/openocd/trunk@580 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* fixed gaffe for default examine implementationoharboe2008-04-111-0/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@567 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Reset wip. Just adding hooks. This is just to reduce the size of the actual ↵oharboe2008-04-111-25/+54
| | | | | | change, no change in behaviour. git-svn-id: svn://svn.berlios.de/openocd/trunk@565 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Wip - split target setup and target examinationoharboe2008-04-111-0/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@564 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* added target->type->examine(). Eventually this will allow for bringing up ↵oharboe2008-04-111-1/+27
| | | | | | telnet/gdb *before* jtag chain has been validated + it might fix some reset halt problems seen as examine() needs to run after TRST has been asserted. git-svn-id: svn://svn.berlios.de/openocd/trunk@563 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added "init" command. "init" and "reset" at end of startup script is ↵oharboe2008-04-091-33/+4
| | | | | | | | | | | | | | | equivalent to daemon_startup(still supported). - print warning if srst and trst change state at the same time when srst_and_trst is seperate - reset now performs a trst, examines and validates the jtag chain before targets assert reset - if startup fails to examine and validate the jtag chain, try a reset before trying again git-svn-id: svn://svn.berlios.de/openocd/trunk@552 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - only if "reset halt" or "reset init" are issued will the reset vector be ↵oharboe2008-04-071-2/+17
| | | | | | | | | | | set up - If communication fails during assert between assert/deassert and during assert, warnings are printed. The warning suggests using srst_only if the clock locks up as that would allow the reset vector to be set up before asserting reset. git-svn-id: svn://svn.berlios.de/openocd/trunk@544 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - the reset mode parameter is now DEPRECATED. It is implementedoharboe2008-04-041-3/+5
| | | | | | | | as an optional parameter with default reset_init. This is to streamline things w.r.t. the target library. git-svn-id: svn://svn.berlios.de/openocd/trunk@540 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reverted some of the changes that possibly broke arm926ejs. Waitingoharboe2008-04-041-5/+4
| | | | | | | | for a bit more info before I can tell with confidence whether or not this would have any effect. - worked on error propagation and output for flash git-svn-id: svn://svn.berlios.de/openocd/trunk@539 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Work on fixing erase check. Many implementations are plain broken.oharboe2008-04-031-15/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | Wrote a default flash erase check fn which uses CFI's target algorithm w/fallback to memory reads. - "flash info" no longer prints erase status as it is stale. - "flash erase_check" now prints erase status. erase check can take a *long* time. Work in progress - arm7/9 with seperate srst & trst now supports reset init/halt after a power outage. arm7/9 no longer makes any assumptions about state of target when reset is asserted. - fixes for srst & trst capable arm7/9 with reset init/halt - prepare_reset_halt retired. This code needs to be inside assert_reset anyway - haven't been able to get stm32 write algorithm to work. Fallback flash write does work. Haven't found a version of openocd trunk where this works. - added target_free_all_working_areas_restore() which can let be of restoring backups. This is needed when asserting reset as the target must be assumed to be an unknown state. Added some comments to working areas API - str9 reset script fixes - some guidelines - fixed dangling callbacks upon reset timeout git-svn-id: svn://svn.berlios.de/openocd/trunk@536 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* optional count argument to mwXoharboe2008-04-021-12/+35
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@532 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* target_call_timer_callbacks_now() now invokes periodic callbacks immediatelyoharboe2008-03-311-8/+11
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@529 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - rename log functions to stop conflicts under win32 (wingdi)ntfreak2008-03-251-50/+50
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@523 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - armv7m control register now set as dirty when switching contextntfreak2008-03-211-1/+1
| | | | | | | - armv7m added core_mode to cortex_m3_debug_entry DEBUG msg - cortex_m3 changed WARNINGS to DEBUG msg in cortex_m3_resume git-svn-id: svn://svn.berlios.de/openocd/trunk@519 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* added profile command. It was added to simplify evaluation by testers.oharboe2008-03-141-0/+188
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@516 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - adds two speeds to jtag_speed. reset and post reset speed. Defaultoharboe2008-03-131-94/+54
| | | | | | | | | | is post reset = reset speed. - removed infinite loop's and exit()'s upon poor arm7/9 communication - cleaned up error messages a bit. Push ERROR() up into fn's that fail and can say something meaningful about what failed. git-svn-id: svn://svn.berlios.de/openocd/trunk@511 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Fixed various error handling when looking for memory leaksoharboe2008-03-101-39/+44
| | | | | | | | | | | | | - Fixed memory leak in gdb_server.c - pushed "Error:" statements up into fn's that know something about what went wrong - load_image now fails if target_write_memory() fails - only issue an asynchronous halt() upon connect of GDB. Synchronous halt/reset doesn't really work as what's required to initialize the target might involve a special monitor sequence for the target in question - syntax error handling improved(fewer exit()'s) git-svn-id: svn://svn.berlios.de/openocd/trunk@482 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Improves error handling upon GDB connectoharboe2008-03-071-15/+3
| | | | | | | | | | | | | | | | | | - switch to synchronous halt during connect. This fixes the bug where poll() was not invoked between halt() and servicing the 'g' register packet - halt() no longer returns error code when target is already halted, just logs a warning. Only the halt() implementation can say anything meaningful about why a halt() failed, so error messages are pushed up to halt() - fixed soft_reset_halt infinite loop bug in arm7_9_common.c. The rest of the implementations are still busted. - by using USER() instead of command_print() the log gets the source + line #. Nice. - no longer invoke exit() if soft_reset_halt fails. A reset can often fix the problem. git-svn-id: svn://svn.berlios.de/openocd/trunk@475 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* warnings & comments fixes.oharboe2008-03-051-4/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@449 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* * fixed malloc corruption in target->debug_reasonoharboe2008-03-051-2/+7
| | | | | | | | | | | | | | | * GDB remote server will now remain online even if the target is in a funny state, e.g. if it requires a reset, it is running while GDB is not in the continue or step packet, e.g. via monitor resume/halt commands in GDB script. * Added some _DEBUG_GDB_IO_ debug tools * Fixed a couple of GDB server lockups, e.g. when O packets detect a severed connection * added ACK upon connection (send +). * added keep-alive messages to reset so GDB protocol remains happy. * fixed crash when timing out connection to GDB git-svn-id: svn://svn.berlios.de/openocd/trunk@445 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Fixed GDB timeout crash - regression introduced back when ↵oharboe2008-03-041-2/+0
| | | | | | log_add/remove_callback was added. git-svn-id: svn://svn.berlios.de/openocd/trunk@442 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Tweaked logging output.oharboe2008-02-291-13/+0
| | | | | | TODO is retired(hopelessly out of date). git-svn-id: svn://svn.berlios.de/openocd/trunk@400 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - clean up target output strings a bitoharboe2008-02-291-9/+9
| | | | | | | | | - open_file_from_path() now uses logging feature - open_file_from_path() no longer uses paths for anything but "r" mode. Fixes bug waiting to happen. git-svn-id: svn://svn.berlios.de/openocd/trunk@389 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Michael Bruck:oharboe2008-02-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm11 --- Added burst memory transfer mode This does not explicitly query command execution but rather uses a small delay produced by the FT2232 on certain TAP commands. A potential failure of this process is detected afterwards and the program terminates with an error. 'arm11 memwrite burst disable' can be used to switch this feature off. 'arm11 memwrite error_fatal disable' can be used to prevent the program to exit on an memory write error --- Added support for interrupt breaking via VCR register Use 'arm11 vcr' command to set. --- Cleaned up the handling of halt/resume/step/poll, target->state, target->debug_reason, target_call_event_callbacks() at least as far as I could guess the intended behaviour from other targets. Did some overall positive tests with GDB. --- Added support for breakpoints Hardware breakpoints only. All breakpoints will be treated as hardware breakpoints. All ARM11's seem to have at least 6 hardware breakpoints. --- Stepping over BKPT added Modification to PC without touching the target. --- Stepping over a B or BL to self will do nothing git-svn-id: svn://svn.berlios.de/openocd/trunk@385 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - convert all files to unix line-endingdrath2008-02-251-2332/+2332
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@347 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* From Michael Bruckoharboe2008-02-251-2332/+2332
| | | | | | | | | - bugfix in server.c - removed unused parameter from jtag_add_ir_scan et al. This wasn't necessary in hindsight but anyway. - arm11 source committed but not not in Makefile.am/target.c for now. git-svn-id: svn://svn.berlios.de/openocd/trunk@341 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - using ERROR_COMMAND_SYNTAX_ERROR to print syntax in a couple of placesoharboe2008-02-251-36/+5
| | | | | | | | | - some more flash cleanup of checking halted state - moved output handler into options.c - very slightly tweaked server.c to make it a bit more compatible with eCos - retired arch_state. Not quite sure how I managed to leave that out last time. git-svn-id: svn://svn.berlios.de/openocd/trunk@338 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fixed target->type->poll() return valueoharboe2008-02-241-9/+40
| | | | | | | | | | | - added arch_state to show status of currently selected target - simplified target->type->arch_state() api. - clean up telnet output a bit - fixed GDB output for arch_state - removed a couple of unecessary exit()'s - cleaned up error propagation a bit in a few places git-svn-id: svn://svn.berlios.de/openocd/trunk@332 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fix read/write size for small unaligned accesses (thanks Michael Bruck)vpalatin2008-02-221-0/+6
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@318 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add support for Marvell Feroceon (thanks to Nicolas Pitre for this patch)vpalatin2008-02-211-0/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@315 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add search paths via new arg -s (-search). Thanks Ted Rothntfreak2008-02-191-1/+1
| | | | | | - updated docs for new command git-svn-id: svn://svn.berlios.de/openocd/trunk@312 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Fixed bug in pathmove for XScalentfreak2008-02-191-7/+82
| | | | | | | | | | | | | | | - added virtual address to working_area. - Improved error messages in a number of places - Added ERROR_COMMAND_SYNTAX_ERROR that commands can return to have syntax printed - Added help for some config commands - Added verification of sw breakpoints with ERROR() message - Removed a couple of exit()'s and replaced with error message - cosmetic fix to armv4_5.c, easier to read - added polymorphic(with default) virt2phys and mmu enable query function to target.h - added virt2phys command that uses target->type->virt2phys() fn Thanks to Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@310 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Added a "User:" debug level. These are messages that are intended for the ↵ntfreak2008-02-181-16/+34
| | | | | | | | | | | | | | user and are part of normal operation. - Faster DEBUG/INFO() when they are disabled - target_read/write_buffer() now uses 16 and 32 bit access for single word aligned requests. Other requests are serviced as quickly as possible. - *much* faster read/write GDB packets, removing timeout problems. - GDB read/write packets w/single word aligned 32/16 bit access now use 32/16 bit word access. - working area can now be changed on the fly. Provides a way to move working area about as MMU is enabled/disabled. - cleaned up error messages for verify_image. Thanks Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@302 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added synchronous wait/resume patch. Thanks Øyvind Harboentfreak2008-02-091-23/+36
| | | | | | - updated docs for halt and wait_halt and resume commands git-svn-id: svn://svn.berlios.de/openocd/trunk@285 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added synchronous reset patch, Thanks Øyvind Harboentfreak2008-02-071-7/+79
| | | | | | - added target_init_reset which calls target_process_reset after all drivers have been initialised git-svn-id: svn://svn.berlios.de/openocd/trunk@284 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added patch to solve the reset problem with arm9 and cortex which Spen had ↵mifi2008-02-021-17/+1
| | | | | | | | | | found. https://lists.berlios.de/pipermail/openocd-development/2008-January/000729.html (Thanks to Spen for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@279 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* fixed incorrect elf segment size - Thanks Øyvind Harboentfreak2008-01-251-2/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@277 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added patch to check some malloc problems.mifi2008-01-241-4/+14
| | | | | | (thanks to Øyvind Harboe for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@276 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added patch to fix crash in load_image on corrupt elf file or out of memory.mifi2008-01-231-0/+5
| | | | | | (thanks to Øyvind Harboe for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@274 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Eleminated leading tabs/white spacebodylove2008-01-211-7/+10
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@268 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add support for cortex_m3 target_request debugmsgsntfreak2008-01-171-1/+2
| | | | | | - target request handler disabled by default until a target has been registered git-svn-id: svn://svn.berlios.de/openocd/trunk@259 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - minimum autoconf 2.59 is now required and verified - due to issues with ↵ntfreak2007-12-291-0/+7
| | | | | | | | | | | | | | | | | | | | AS_HELP_STRING - native win32 now handles WSAECONNRESET - no longer exits openocd - qCRC packet now works correctly under cygwin (gdb compare-sections command) - removed __USE_GNU define from gdbserver.c - gdb qSupported packet is now handled, with this we are able to tell gdb packet size, memory map of target - added new target script gdb_program_config - called before gdb flash programming - new gdb server command gdb_memory_map (enable|disable> - default is disable - new gdb server command gdb_flash_program (enable|disable> - default is disable - gdb flash programming supported - vFlash packets - image_elf_read_section now does not clear any remaining data, this was causing the gdb checksum to fail with certain files - reformat of usbprog.c - memory leak in command_print fixed - updated texi doc to include new commands - added gdb programming section to docs git-svn-id: svn://svn.berlios.de/openocd/trunk@246 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - removed flash write_image - binary compare function has been moved to ↵ntfreak2007-12-201-7/+39
| | | | | | | | | verify_image command - minor code reformat and cleanup - updated docs to include new commands git-svn-id: svn://svn.berlios.de/openocd/trunk@243 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added patch to display device information as INFO toomifi2007-12-091-5/+22
| | | | | | | | | | - added patch which fixes a crash upon flash write error - added patch which will improve the reset handling when SRST is tied to TRST (thanks to Oyvind Harboe for these patches) git-svn-id: svn://svn.berlios.de/openocd/trunk@218 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add verify_image commandntfreak2007-10-221-0/+127
| | | | | | - add support for gdb qCRC packet (compare-sections command) git-svn-id: svn://svn.berlios.de/openocd/trunk@210 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - cleaned up str7, str9 and stm32 flash driversntfreak2007-10-081-1/+3
| | | | | | | | | | | - str7 flash driver now checks correct busy bits depending on device - str9 flash driver now disables ITCM order as per st programming manual - added str7 disable_jtag command - added gdb_detach command - updated arm966e cp15 support - fix crash on mingw build when enabling target_request debugmsgs git-svn-id: svn://svn.berlios.de/openocd/trunk@209 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Fixed display of sector sizes in flash.cmlu2007-09-101-1/+1
| | | | | | | | | - Clean up, remove unused variables and code in armv7, cortex_m3 and stellaris code - Move restore_context from cortex_m3 to armv7m - Updated halt handling for cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not ↵drath2007-08-141-1/+5
| | | | | | | | | | | | | | | | functional yet). Configure option changed from --enable-presto to --enable-presto_ftd2xx and --enable-presto_libftdi - completed trace point support for use with ARM7/9 DCC - completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities) - fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy) - fixed bug in image_add_section (thanks to Pavel Chromy) - at91sam7 sector erase reworked (thanks to Pavel Chromy) - merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-28 01:43:54 +0000