summaryrefslogtreecommitdiff
path: root/src/target
Commit message (Collapse)AuthorAgeFilesLines
* ARM: define two register utilitiesDavid Brownell2009-11-228-48/+122
| | | | | | | | | | | | | | Define arm_reg_current() ... returning handle to a given register, and encapsulating the current mode's register shadowing. It's got one current use, for reporting the current register set to GDB. This will let later patches clean up much ARMV4_5_CORE_REG_MODE() nastiness, saving a bit of code. Define and use arm_set_cpsr() ... initially it updates the cached CPSR and sets up state used by arm_reg_current(), plus any SPSR handle. (Later: can also set up for T and J bits.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: simplify CPSR handlingDavid Brownell2009-11-2211-87/+103
| | | | | | | | | | | | | | Stash a pointer to the CPSR in the "struct arm", to help get rid of the (common) references to its index in the register cache. This removes almost all references to CPSR offsets outside of the toplevel ARM code ... except a pair related to the current ARM11 "simulator" logic (which should be removable soonish). This is a net minor code shrink of a few hundred bytes of object code, and also makes the code more readable. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM11: remove disabled register hooksDavid Brownell2009-11-222-93/+3
| | | | | | | | Minor cleanup of ARM11 register handling: remove disabled register hooks. This should all be handled by shared code, and this stuff is just clutter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: pass 'struct reg *' to register r/w routinesDavid Brownell2009-11-208-73/+83
| | | | | | | | | | | | | | | | Implementations need to access the register struct they modify; make it easier and less error-prone to identify the instance. (This removes over 10% of the ARMV4_5_CORE_REG_MODE nastiness...) Plus some minor fixes noted when making these updates: ARM7/ARM9 accessor methods should be static; don't leave CPSR wrongly marked "dirty"; note significant XScale omissions in register handling; and have armv4_5_build_reg_cache() record its result. Rename "struct armv4_5_core_reg" as "struct arm_reg"; it's used for more than those older architecture generations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM7/ARM9: remove old "debug commands"David Brownell2009-11-201-130/+0
| | | | | | | | | | | | | | | Remove two commands that were documented as "debug commands" and where "you probably don't want to use this". We never intended to support them, and at least one problem report boiled down to using this when it shouldn't have been used. Update the docs on the existing register commands to talk a bit more about register access and cache behavior. (Those debug commands existed largely to *bypass* the cache.) And fix some minor doc goofs that snuck in with recent changes, renaming "armv4_5" as "arm" and "arm9tdmi" as "arm9". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Cortex-A8: better context restoreDavid Brownell2009-11-191-13/+67
| | | | | | | The previous version never wrote dirty registers for non-current CPU modes ... fix that. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Cortex-A8: mode supportDavid Brownell2009-11-191-30/+116
| | | | | | | | | | | | | | | | We *should* be able to read and write registers in any core mode, instead of being stuck with whatever mode the core was when we entered debug state. This patch makes them work. Note that the current restore_context() only handles the current mode; writing to other-mode registers is a NOP without a followup patch fixing that. Also, that SPSR access needed some bugfixes; it was confused with CPSR. Secure monitor mode also seems dubious; there's probably more to be done before that's sufficiently understood by the debugger. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: create/use register_cache_invalidate()David Brownell2009-11-1914-77/+47
| | | | | | | | | | | | | | | Create a generic register_cache_invalidate(), and use it to replace three all-but-identical core-specific routines: - armv4_5_invalidate_core_regs() - armv7m_invalidate_core_regs - mips32_invalidate_core_regs() too. Make cache->num_regs be unsigned, avoiding various errors. Net code shrink and simplification. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: remove per-register mallocDavid Brownell2009-11-192-1/+2
| | | | | | | Just pre-allocate memory for the cached register value. Shrinks heap overhead; increases locality-of-reference. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: streamline register initDavid Brownell2009-11-191-74/+88
| | | | | | | | | Combine register names with other per-register data into a single template structure. This saves space, and makes it easier to change how registers get handled (by shrinking the number of places that care about cache indices). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Cortex-A8: parts of examine() run just onceDavid Brownell2009-11-191-4/+15
| | | | | | | | | The examine() method has some conceptual breakage. Cope with it by manually splitting out the run-once parts from the after-each-reset parts ... this gets rid of memory leaks and speeds up resets after the first one. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARMv7-A: use standard ARM core statesDavid Brownell2009-11-195-31/+43
| | | | | | | | | | | | | | | We don't want an ARMv7-specific core state enumeration just to add ThumbEE state. Update the generic stuff to handle that, and replace the V7-specific bits with it. For Cortex-A8: on debug entry, check both the T and J bits instead of just the T bit. When the J bit is set, set the right state and warn appropriately. (And while we're at it, move the generic arm struct to the front of the v7a structure, for somewhat better code generation.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARMv7-A: use standard ARM core_mode symbolsDavid Brownell2009-11-192-16/+3
| | | | | | | | | The only way ARMv7-A modes differ from ARMv4/ARMv5 flavors is that v7-A is allowed to include "Secure monitor" support. That's now handled by our standard top-level ARM code ... so phase out the stuff that's specific to ARMv7-A. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* remove fast command and jim_global_longZachary T Welch2009-11-181-2/+2
| | | | | | | | Removing the fast command eliminates the fast_and_dangerous global, which was used only by arm7_9_common as an initializer. The command is not called in the tree; instead, more explicit commands are used. The jim_global_long function was not used anywhere in the tree.
* add handle_command_parse_bool command helperZachary T Welch2009-11-181-45/+10
| | | | | | | | | Rewrite arm11_handle_bool to provide a generic on/off command helper. Refactors COMMAND_PARSE_BOOL to use new command_parse_bool helper, which gets reused by the new command_parse_bool_any helper. This later helper is called by the new command helper function to accepts any on/off, enable/disable, true/false, yes/no, or 0/1 parameter.
* use COMMAND_PARSE_ENABLE macro where appropriateZachary T Welch2009-11-183-96/+31
| | | | | | | | Updates all command parsing of simple "enable" and "disable" arguments. A few case in the tree use a tri-state or extended arguments, which cannot use this simple macro. Simlifies the xscale icache/dcache command handler logic.
* use COMMAND_PARSE_ON_OFF where appropriateZachary T Welch2009-11-182-26/+10
| | | | Updates all command parsing of "on" and "off" arguments.
* ARM: rework "arm reg" output for new modeDavid Brownell2009-11-181-35/+113
| | | | | | | | | | | | | | | | Change the layout to show the "Secure Monitor" registers too, when they're present. Instead of lining registers for each of six (or seven) modes up in adjacent vertical columns, display each mode's registers (or shadows) in a single block, avoiding duplicate value displays. This also lets us shrink the line length to fits in standard 80 character lines ... six or seven 18-character columns can't fit. Relabel "r13" as "sp", so it's more meaningful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Cortex-A8: xPSR handling updatesDavid Brownell2009-11-181-17/+20
| | | | | | | | | | When we read the CPSR on debug entry, update the CPSR cache in all cases, not just when the current processor state is User or System. Plus minor cleanup of how the (too-many) other registers' cache entries get updated. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: add a default full_context() methodDavid Brownell2009-11-182-12/+27
| | | | | | | | | | | | If the core doesn't provide an optimized version of this method, provide one without core-specific optimizations. Use this to make Cortex-A8 support the "arm reg" command. Related: make the two register access methods properly static, have the "set" log a "not halted" error too, and make sure that the "valid" flag is set on successful reads. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: simplify ARMv7-A register handlingDavid Brownell2009-11-183-188/+50
| | | | | | | | | | | | | | | | | | | ARMv7-A doesn't need to duplicate all the standard ARM code for register handling. - Switch Cortex-A8 to use the standard register code - Remove duplicated infrastructure from ARMv7-A - Have ARMv7-A arch_state() show CPSR, like other ARMs Add comments to show where the Cortex-A8 isn't actually doing the right thing for register reads/writes, unless core happens to be in the right mode to start with. (Looks like maybe there may be generic confusion between saved/current PSR values in all the ARM code ...) Make related ARMv7-A and Cortex-A8 symbols properly static. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: setup "secure monitor mode" shadow regsDavid Brownell2009-11-182-21/+53
| | | | | | | | | | | | | Teach the "armv4_5" register code to understand about the secure monitor mode: - Add the other three shadowed registers to the arrays - Support another internal mode number (sigh) in mappings - Catch malloc/calloc failures building that register cache This should kick in for Cortex-A8 and ARM1176. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: add "core_type" field to "struct arm"David Brownell2009-11-184-5/+31
| | | | | | | | | | It's used to flag cores with the "TrustZone" extension, and is used in subsequent patches to set up support for the registers shadowed by its new secure monitor mode. The ARM1176 and Cortex-A8 both support this new mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* split startup.tcl file across modulesZachary T Welch2009-11-182-1/+168
| | | | | | | Moves definitions for each layer into their own file, eliminating layering violations in the built-in TCL code. Updates src/Makefile.am rules to include all files in the final startup.tcl input file, and others Makefile.am rules to distribute the new files in our packages.
* fix regression in md/mw commandsZachary T Welch2009-11-181-4/+2
| | | | | | | The recent migration broke them, the fixes broken them in a new way, but this should restore them to working order. Eliminates the temporary variable, as the CMD_NAME macro can once again be use in routines that increment CMD_ARGV without nasty side-effects.
* jtag-api: get rid of unecessary buf_set_u23() that make code obtuse.Øyvind Harboe2009-11-181-11/+10
| | | | | | | | Also, this is on the path to increasing the word size for bit vectors from 8 to something wider(32? natural host machine width?) Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ARM: add is_arm_mode()David Brownell2009-11-176-40/+39
| | | | | | | | | | | | | | | | | | Add a new is_arm_mode() predicate, and use it to replace almost all calls to current armv4_5_mode_to_number(). Eventually those internal mode numbers should vanish... along with their siblings in the armv7a.c file. Remove a handful of superfluous checks ... e.g. the mode number was just initialized, or (debug entry methods) already validated. Move one of the macros using internal mode numbers into the only file which uses that macro. Make the tables manipulated with those numbers be read-only and, where possible, static so they're not confused with part of the generic ARM interface. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: add arm_mode_name()David Brownell2009-11-179-30/+75
| | | | | | | | | | | | | | | Add and use arm_mode_name() to map from PSR bits to user meaningful names. It uses a new table which, later, can be used to hold other mode-coupled data. Add definitions for the "Secure Monitor" mode, as seen on some ARM11 cores (like ARM1176) and on Cortex-A8. The previous mode name scheme didn't understand that mode. Remove the old mechanism ... there were two copies, caused by Cortex-A8 needing to add "Secure Monitor" mode support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: only use one set of dummy FPA registersDavid Brownell2009-11-178-106/+39
| | | | | | | | | | | | | | | | All ARM cores need to provide obsolete FPA registers in their GDB register dumps. (Even though cores with floating point support now generally use some version of VFP...) Clean up that support a bit by sharing the same dummy registers, and removing the duplicate copies. Eventually we shouldn't need to export those dummies. (This makes the ARMv7-M support include the armv4_5 header, and cleans up related #includes, but doesn't yet use anything from there except those dummies.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* command_handler: change 'cmd_ctx' to CMD_CTXZachary T Welch2009-11-1720-364/+367
| | | | Convert all command handler 'cmd_ctx' parameter usage with CMD_CTX.
* command_handler: change 'args' to CMD_ARGVZachary T Welch2009-11-1720-189/+189
| | | | | This patch converts all instances of 'args' in COMMAND_HANDLER routines to use CMD_ARGV macro.
* command_handler: change to 'argc' to CMD_ARGCZachary T Welch2009-11-1719-120/+120
| | | | | This patch converts all instances of 'argc' in COMMAND_HANDLER routines to use CMD_ARGC.
* target: simplify register get/set opsDavid Brownell2009-11-1713-127/+60
| | | | | | | | | | | No need to indirect from registered integers to pointers. Just stash the pointers directly in the register struct, and don't even bother registering. This is a small code shrink, speeds register access just a smidgeon, and gets rid of another rude exit() path. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM9TDMI: remove now-needless "struct arm9tdmi"David Brownell2009-11-179-72/+45
| | | | | | | And move the rest of the vector_catch stuff into the C file; it's not part of the module interface. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM7TDMI: remove now-needless "struct arm7tdmi"David Brownell2009-11-174-29/+21
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: remove some more duplicate includesDavid Brownell2009-11-174-4/+1
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARMv7-A: no exit() callsDavid Brownell2009-11-162-4/+3
| | | | | | | Also, switch integrity check over to the correct magic number, and remove duplicate v4/v5 #define. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Cortex-A8: no exit() calls, add missing v7-A initDavid Brownell2009-11-161-31/+16
| | | | | | | Eventually there should be a v7a init routine, but for now all that is inlined here. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: fewere exit() callsDavid Brownell2009-11-161-4/+4
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* MIPS: no exit() callsDavid Brownell2009-11-162-7/+5
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARMv7-M: no exit() callsDavid Brownell2009-11-161-4/+4
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARMv4/ARMv5: no exit() callsDavid Brownell2009-11-161-6/+8
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM11: fewer exit() callsDavid Brownell2009-11-161-4/+6
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Cortex-M3: don't exit()David Brownell2009-11-161-24/+10
| | | | | | | Get rid of undesirable and needless exit() calls from the Cortex-M3 support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARMv7A: use standard disassemblerDavid Brownell2009-11-161-83/+0
| | | | | | We no longer need v7A-specific code for this. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM11: register (most) standard ARM commandsDavid Brownell2009-11-162-1/+10
| | | | | | | Have ARM11 register the "standard" ARM commands. For now, only disassembly really works. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: "armv4_5" command prefix becomes "arm"David Brownell2009-11-161-9/+9
| | | | | | | | | | Rename the "armv4_5" command prefix to straight "arm" so it makes more sense for newer cores. Add a simple compatibility script. Make sure all the commands give the same "not an ARM" diagnostic message (and fail properly) when called against non-ARM targets. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* fileio: improve API typesZachary T Welch2009-11-165-15/+15
| | | | | | | | | | | | | Use size_t instead of uint32_t when specifying file sizes. Update all consumers up through the layers to use size_t when required. These changes should be safe, but the higher-levels will need to be updated further to receive the intended benefits (i.e. large file support). Add error checking for fileio_read and file_write. Previously, all errors were being silently ignored, so this change might cause some problems for some people in some cases. However, it gives us the chance to handle any errors that do occur at higher-levels, rather than burying our heads in the sand.
* struct fileio: improve member typesZachary T Welch2009-11-161-1/+1
| | | | | | Add const keyword to file url and cast to free(). Make size an ssize_t and chase all format strings that use it.
* ARM: standard disassembler uses Thumb2 entryDavid Brownell2009-11-162-38/+38
| | | | | | | | | | | | | | | | | Tweak "standard" ARM disassembler diagnostics to fail if the target is not "an ARM" (vs. not "an ARMV4/5"), so it makes more sense for cores inheriting this as the "generic" disassembler. Also, to use the Thumb2 entry instead of the original Thumb entry. This makes it work better for both newer cores (which support those added instructions) and for BL and BLX instructions on older cores. (Those instructions are 32-bits, which requires curious state-aware code to go through a 16-bit decode interface...) Plus minor cleanups, notably to have fewer exit paths and to make sure they all return failure codes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-09 06:42:39 +0000