summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* ARM11: use shared DSCR bit namesDavid Brownell2009-12-033-42/+24
| | | | | | | | | | | | | For the bits now defined in "arm_dpm.h", switch to the shared DSCR_* symbol and remove the ARM11_DSCR_* version. Define DSCR_INT_DIS and use it instead of the ARM11_DSCR_* sibling symbol. (Note: for both ARM11 and Cortex-A8, this should arguably be enabled by default when single stepping.) Remove some other unused declarations in "arm11.h". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM DPM: make DSCR bit defs sharableDavid Brownell2009-12-033-33/+43
| | | | | | | | | | | | | | | | Move the symbols for these bits from "armv7a.h" to "arm_dpm.h", where they can be seen and used not just by Cortex-A but also by the ARM11 (armv6) code. Change them from bit numbers to bit masks ... this matches the usage in ARM11 code, and also makes it easier to read. Rename DSCR_EXT_INT_EN as DSCR_ITR_EN to match the docs; it's enabling ITR functionality, not external interrupts, so this changes the name to be less misleading. (There *IS* a bit affecting interrupts, and this isn't it.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* fix another init regressionDavid Brownell2009-12-031-4/+7
| | | | | | | | | | | | | | | This makes Beagle work again, instead of losing horribly because the JTAG event handlers are no longer able to e.g. "runtest". I get the previous quirky behavior ... comes up OK but "reset halt" somewhat mysteriously makes it all better. (Instead of nothing being able to work at all...) However, I'm still seeing: The 'init' command must be used before 'init'. That seems to come from invoking "jtag init", sometime after it gets mapped to "ocd_jtag init", according to debug message traces. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* fix double 'init' regressionZachary T Welch2009-12-031-1/+1
| | | | | | To prevent regression in the behavior of 'init', we allow it to run in any mode. If provided with -c init and with -c noinit, then the second init at startup caused a spurious mode failure. Let 'init' handle it.
* fix regressions with GDB port numbersZachary T Welch2009-12-031-3/+11
| | | | | | Use a separate variable for iterating GDB service port numbers than the one set by the user. Restores the behavior of returning the original port number and only incrementing the port used on success.
* zy1000: include files have moved aboutØyvind Harboe2009-12-031-2/+2
| | | | | | | | now compiles again after include files were moved about to reduce -I usage and stop using quotes but rather angle brackets for include files. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* remove tertiary include pathsZachary T Welch2009-12-0312-55/+10
| | | | | With all #include directives converted, we only need to have the top-level src/ directory in the search path.
* change #include "../hello.h" to "hello.h"Zachary T Welch2009-12-034-3/+5
| | | | | | Before we can -I the top-level src/ directory alone, references to "hello.h" must be updated. This is an internal header, so it does not need angle brackets.
* change #include "xsvf.h" to <xsvf/xsvf.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "xsvf.h" the following form should be used. #include <xsvf/xsvf.h> The exception is from .c files in the same directory.
* change #include "svf.h" to <svf/svf.h>Zachary T Welch2009-12-033-3/+3
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "svf.h" the following form should be used. #include <svf/svf.h> The exception is from .c files in the same directory.
* change #include "pld.h" to <pld/pld.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "pld.h" the following form should be used. #include <pld/pld.h> The exception is from .c files in the same directory.
* change #include "telnet_server.h" to <server/telnet_server.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "telnet_server.h" the following form should be used. #include <server/telnet_server.h> The exception is from .c files in the same directory.
* change #include "server.h" to <server/server.h>Zachary T Welch2009-12-036-6/+6
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "server.h" the following form should be used. #include <server/server.h> The exception is from .c files in the same directory.
* change #include "httpd.h" to <server/httpd.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "httpd.h" the following form should be used. #include <server/httpd.h> The exception is from .c files in the same directory.
* change #include "gdb_server.h" to <server/gdb_server.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "gdb_server.h" the following form should be used. #include <server/gdb_server.h> The exception is from .c files in the same directory.
* change #include "s3c24xx_regs.h" to <flash/nand/s3c24xx_regs.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "s3c24xx_regs.h" the following form should be used. #include <flash/nand/s3c24xx_regs.h> The exception is from .c files in the same directory.
* change #include "ocl.h" to <flash/nor/ocl.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "ocl.h" the following form should be used. #include <flash/nor/ocl.h> The exception is from .c files in the same directory.
* change #include "nand.h" to <flash/nand.h>Zachary T Welch2009-12-037-7/+7
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "nand.h" the following form should be used. #include <flash/nand.h> The exception is from .c files in the same directory.
* change #include "mflash.h" to <flash/mflash.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "mflash.h" the following form should be used. #include <flash/mflash.h> The exception is from .c files in the same directory.
* change #include "flash.h" to <flash/flash.h>Zachary T Welch2009-12-0321-21/+21
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "flash.h" the following form should be used. #include <flash/flash.h> The exception is from .c files in the same directory.
* change #include "arm_nandio.h" to <flash/arm_nandio.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm_nandio.h" the following form should be used. #include <flash/arm_nandio.h> The exception is from .c files in the same directory.
* change #include "trace.h" to <target/trace.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "trace.h" the following form should be used. #include <target/trace.h> The exception is from .c files in the same directory.
* change #include "target_request.h" to <target/target_request.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "target_request.h" the following form should be used. #include <target/target_request.h> The exception is from .c files in the same directory.
* change #include "target.h" to <target/target.h>Zachary T Welch2009-12-037-7/+7
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "target.h" the following form should be used. #include <target/target.h> The exception is from .c files in the same directory.
* change #include "register.h" to <target/register.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "register.h" the following form should be used. #include <target/register.h> The exception is from .c files in the same directory.
* change #include "mips_ejtag.h" to <target/mips_ejtag.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "mips_ejtag.h" the following form should be used. #include <target/mips_ejtag.h> The exception is from .c files in the same directory.
* change #include "mips32_pracc.h" to <target/mips32_pracc.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "mips32_pracc.h" the following form should be used. #include <target/mips32_pracc.h> The exception is from .c files in the same directory.
* change #include "mips32.h" to <target/mips32.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "mips32.h" the following form should be used. #include <target/mips32.h> The exception is from .c files in the same directory.
* change #include "image.h" to <target/image.h>Zachary T Welch2009-12-035-5/+5
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "image.h" the following form should be used. #include <target/image.h> The exception is from .c files in the same directory.
* change #include "etm.h" to <target/etm.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "etm.h" the following form should be used. #include <target/etm.h> The exception is from .c files in the same directory.
* change #include "embeddedice.h" to <target/embeddedice.h>Zachary T Welch2009-12-036-6/+6
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "embeddedice.h" the following form should be used. #include <target/embeddedice.h> The exception is from .c files in the same directory.
* change #include "breakpoints.h" to <target/breakpoints.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "breakpoints.h" the following form should be used. #include <target/breakpoints.h> The exception is from .c files in the same directory.
* change #include "avrt.h" to <target/avrt.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "avrt.h" the following form should be used. #include <target/avrt.h> The exception is from .c files in the same directory.
* change #include "armv7m.h" to <target/armv7m.h>Zachary T Welch2009-12-034-4/+4
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv7m.h" the following form should be used. #include <target/armv7m.h> The exception is from .c files in the same directory.
* change #include "armv7a.h" to <target/armv7a.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv7a.h" the following form should be used. #include <target/armv7a.h> The exception is from .c files in the same directory.
* change #include "armv4_5_mmu.h" to <target/armv4_5_mmu.h>Zachary T Welch2009-12-035-5/+5
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv4_5_mmu.h" the following form should be used. #include <target/armv4_5_mmu.h> The exception is from .c files in the same directory.
* change #include "armv4_5_cache.h" to <target/armv4_5_cache.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv4_5_cache.h" the following form should be used. #include <target/armv4_5_cache.h> The exception is from .c files in the same directory.
* change #include "armv4_5.h" to <target/armv4_5.h>Zachary T Welch2009-12-0311-11/+11
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv4_5.h" the following form should be used. #include <target/armv4_5.h> The exception is from .c files in the same directory.
* change #include "arm_jtag.h" to <target/arm_jtag.h>Zachary T Welch2009-12-033-3/+3
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm_jtag.h" the following form should be used. #include <target/arm_jtag.h> The exception is from .c files in the same directory.
* change #include "arm_dpm.h" to <target/arm_dpm.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm_dpm.h" the following form should be used. #include <target/arm_dpm.h> The exception is from .c files in the same directory.
* change #include "arm_adi_v5.h" to <target/arm_adi_v5.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm_adi_v5.h" the following form should be used. #include <target/arm_adi_v5.h> The exception is from .c files in the same directory.
* change #include "arm9tdmi.h" to <target/arm9tdmi.h>Zachary T Welch2009-12-033-3/+3
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm9tdmi.h" the following form should be used. #include <target/arm9tdmi.h> The exception is from .c files in the same directory.
* change #include "arm966e.h" to <target/arm966e.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm966e.h" the following form should be used. #include <target/arm966e.h> The exception is from .c files in the same directory.
* change #include "arm7tdmi.h" to <target/arm7tdmi.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm7tdmi.h" the following form should be used. #include <target/arm7tdmi.h> The exception is from .c files in the same directory.
* change #include "arm7_9_common.h" to <target/arm7_9_common.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm7_9_common.h" the following form should be used. #include <target/arm7_9_common.h> The exception is from .c files in the same directory.
* change #include "arm11.h" to <target/arm11.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm11.h" the following form should be used. #include <target/arm11.h> The exception is from .c files in the same directory.
* change #include "algorithm.h" to <target/algorithm.h>Zachary T Welch2009-12-0310-10/+10
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "algorithm.h" the following form should be used. #include <target/algorithm.h> The exception is from .c files in the same directory.
* change #include "minidriver.h" to <jtag/minidriver.h>Zachary T Welch2009-12-033-3/+3
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "minidriver.h" the following form should be used. #include <jtag/minidriver.h> The exception is from .c files in the same directory.
* change #include "jtag.h" to <jtag/jtag.h>Zachary T Welch2009-12-0315-15/+15
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "jtag.h" the following form should be used. #include <jtag/jtag.h> The exception is from .c files in the same directory.
* change #include "interface.h" to <jtag/interface.h>Zachary T Welch2009-12-0319-19/+19
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "interface.h" the following form should be used. #include <jtag/interface.h> The exception is from .c files in the same directory.
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-25 14:42:15 +0000