summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
...
* ETM trigger_percent becomes an ETB commandDavid Brownell2009-12-194-52/+58
| | | | | | | | This command was misplaced; it's not generic to all traceport drivers, only the ETB supports this kind of configuration. So move it, and update the relevant documentation. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR FLASH: only erase/unlock whole sectorsDavid Brownell2009-12-181-8/+36
| | | | | | | | | | | | | | | Much to my surprise, I observed a "flash erase_address ..." command erasing data which I said should not be erased. The issue turns out to be generic NOR flash code which was silently, and rather dangerously, morphing partial-sector references into unrequested whole-sector ones. This patch removes that low-level morphing. If desired, it can and should be done in higher level code. (We might need to fix some stuff in the GDB server code.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Subject: flash fill[bwh] should use bulk i/oDavid Brownell2009-12-181-2/+4
| | | | | | | | | It's currently allocating a big buffer but writing it out in units of sizeof(host's pointer) ... sub-optimal. Plus fix a couple minor coding style goofs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* stellaris: fix min buffer length checksDavid Brownell2009-12-181-7/+4
| | | | | | | Word count == size/4; cope. And increase buf_min so it's large enough to cover the overhead in my tests. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: better {read,write}_phys()David Brownell2009-12-181-2/+14
| | | | | | | | We can actually do the right thing if the MMU is off; save the error message for the phys-but-MMU-enabled path, which is what isn't yet supported. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* dsp563xx: cygwin build fixesDavid Brownell2009-12-181-5/+5
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* stellaris: update bulk flash writesDavid Brownell2009-12-181-20/+45
| | | | | | | | | | | | | | | | | | | | | | | Try to right-size the SRAM buffers, by not: - using them for very small writes - giving up when a large buffer isn't available - allocating buffers much larger than their data Also don't: - bother loading the code unless we allocate the writebuffer too - be so verbose with messaging: * be more concise * reduce importance (e.g. DEBUG not WARNING) * remove duplication The minimum buffer size is something of a guess. It's eight times smaller than before, almost the same size as the code being downloaded. It probably deserves some tuning. Also, note an erratum affecting flash protection on some chips; and narrow many over-wide lines affected by the above changes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NAND write data page refactoring.Dean Glazeski2009-12-182-59/+69
| | | | | | | | | | | Refactored the write page raw function into two new functions for writing data to a NAND device and then another function to finish up a write to a NAND device. This includes some new updates to introduce more error checking to existing code. [dbrownell@users.sourceforge.net: fix fault handling, whitespace] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NAND read data page refactor.Dean Glazeski2009-12-182-45/+25
| | | | | | | | | | | | | | Added a new function to encapsulate reading a page of data from a NAND device using either the read_block_data function of a NAND controller or to use direct reading of data from the NAND device. This also adds some performance enhancements and uses the read_data function if the read_block_data function fails safely (because it can't allocate a buffer in the working area). [dbrownell@users.sourceforge.net: fix fault handling, whitespace] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* JTAG: shrink "scan_chain" outputDavid Brownell2009-12-161-8/+8
| | | | | | | | | | Tweak the "scan_chain" output by removing column separators. Also remove the "current instruction" state ... which changes constantly. Now its style resembles the "targets" output, and can even fit on one line in standard terminals and in the PDF docs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* stellaris: commentsDavid Brownell2009-12-162-12/+34
| | | | | | | | | | | Someday revisit various issues: Tempest parts support writing more than one word at a time; for some target firmware it might be necessary to save and restore flash IRQ configuration. (The safest policy is likely to always reset after flash updates.) Plus swap some undesirable TAB characters with SPACE. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* stellaris: probe() cleanupsDavid Brownell2009-12-161-86/+42
| | | | | | | | | | | | | | Fix potential memory leak: make sure the per-bank data structures are only allocated in probe(), and that calling probe() multiple times is a NOP. Use it for auto_probe(). Require probe() to have done its thing: don't make access routines cope with it not having been called. Shrink a bunch of failure paths; and in some cases, correct them. Don't needlessly insist on a halted target for probe(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* stellaris: remove needless codeDavid Brownell2009-12-161-50/+1
| | | | | | | No point in reading and discarding a status value when fetching part description data. Or having that needless "#if 0" code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* stellaris: avoid chip writesDavid Brownell2009-12-161-13/+10
| | | | | | | | | | | | Previously "reading" clock info (and part info) also, as a side effect, wrote the flash timing register. Instead, be more safe: "reading" should only read. Write paths still refresh timing, coping with changes the application code may have made. Also rename the routine which sets flash timing, indicating what it's really doing; it's got nothing to do with a "mode". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR: bugfix "flash fill[bwh] ..." helptextDavid Brownell2009-12-161-3/+3
| | | | | | These commands don't have a "bank" parameter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* zy1000: removed some redundant includeØyvind Harboe2009-12-161-22/+4
| | | | | | spotted by lint. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ecos: crisper implementation of timeval_ms()Øyvind Harboe2009-12-164-13/+87
| | | | | | | A crisper/faster implementation under eCos that makes profiling a tad easier. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* server: server loop will exhaust data inputs before sleepingØyvind Harboe2009-12-161-17/+31
| | | | | | | | | | By exhausting data on input, the performance will be more consistent + the code more clearly distinguishes between polling and processing. A test showed gdb packet load performance go from ~1550kByte/s to 1650kBytes/s + being more stable. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* XScale: use all-ones for BYPASS, not five-onesDavid Brownell2009-12-151-1/+1
| | | | | | PXA3xx has more than five bits in IR. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: add basic dsp563xx supportmkdorg@users.sourceforge.net2009-12-156-1/+1290
|
* zy1000: keep up with command.h cleanupØyvind Harboe2009-12-151-5/+15
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* command: retire obsolete macroØyvind Harboe2009-12-151-11/+0
| | | | | | | COMMAND_REGISTER() was only used transiently during code conversion. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ARM11: improved reset supportDavid Brownell2009-12-141-48/+55
| | | | | | | | | | | | | | Teach ARM11 how to use: - the new "reset-assert" event - vector catch to implement "reset halt" - use SRST more like other cores do - ... including leaving post-SRST delays up to config scripts This gives OMAP2420 the ability to reset, and doesn't seem to cause new iMX31 problems. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: disassemble STM correctlyDavid Brownell2009-12-141-2/+5
| | | | | | There is no "STMMIDA" instruction. There is however "STMDAMI". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* stellaris: device IDsEric Wetzel2009-12-141-150/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I added the remaining devices and device IDs to stellaris.c, and removed several devices that don't exist on the Stellaris web page. Additionally, I found a few devices with duplicate IDs ... the DID1 Version Number for LM3Sxxx parts have DID1 Version = 0x0, and for LM3Sxxxx have DID1 Version = 0x1. So I extended the comparison to use the VER and FAM fields from DID1 also. ID=0x33: LM3S812 (DID1v0) and LM3S2616 (DID1v1) ID=0x39: LM3S808 (DID1v0) and LM3S2276 (DID1v1) These are the parts I removed from the file for lack of documentation (no data sheet to confirm part ID): LM3S318, LM3S1101, LM3S1108, LM3S1615, LM3S1616, LM3S2016, LM3S2101, LM3S2108, LM3S3759, LM3S3768, LM3S5757, LM3S5767, LM3S5768, LM3S5769, LM3S6815, LM3S6816, LM3S6915, LM3S6916, LM3S6111, LM3S6118. Also, sort devices according to part number. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* jtag: add '-ignore-version' optionDavid Brownell2009-12-143-6/+38
| | | | | | | | | | Add a "-ignore-version" to "jtag newtap" which makes the IDCODE comparison logic optionally ignore version differences. Update the "scan_chain" command to illustrate this by showing the "*" character instead of the (ignored) version nibble. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target files shouldn't #include <target/...h>David Brownell2009-12-1325-39/+38
| | | | | | | | | | | Make these ".h" files adopt the same policy the ".c" files already follow: don't use <subsystem/...h> syntax for private interfaces. If we ever get reviewed/supported "public" interfaces they should come exclusively from some include/... directory; that'll be the time to switch to <...> syntax for any subsystem's own interfaces. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: further shrink Jim-awarenessDavid Brownell2009-12-134-7/+10
| | | | | | | | | | | | | Don't include <helper/jim.h> from target.h ... not everything which touches targets needs to be able to talk to Jim. Plus, most files include this header by another path. Also, switch the affected files to use the classic sequence for #included files: all <framework/headers.h> first, then the "local_headers.h". This helps prevent growth of problematic layering, by minimizing entanglement. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* LPC2000: rename "r13_svc" as "sp_svc"David Brownell2009-12-121-1/+1
| | | | | | This driver didn't get updated when the name changed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM11: avoid pointless status returnsDavid Brownell2009-12-112-16/+11
| | | | | | | | For some routines that only returned ERROR_OK and where the caller never checked ... don't bother. Remove some noise, and bugfix some comments. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* add missing call to add new NAND devicesZachary T Welch2009-12-112-0/+4
| | | | | I forgot to add a call to the newly factored nand_device_add(), along with its forward declaration.
* fix 'write_image' usage informationZachary T Welch2009-12-111-1/+1
| | | | | The 'flash write_image' command erroneously listed the bank number, when it actually uses target addresses to do that lookup for the user.
* ARM DPM: support updating HW breakpointsDavid Brownell2009-12-112-52/+75
| | | | | | | | | | | Abstract the DPM breakpoint and watchpoint data structures to have a shared core for housekeeping. Abstract the code updating the watchpoint registers so that it can be used to update breakpoint registers. Then do so, when something has set up the breakpoint state used by this code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: disassembly fixes for LDC/STC/MRRC/MCRRDavid Brownell2009-12-111-18/+33
| | | | | | | Properly detect all of these, including the "2" variants; and bugfix parameter display for LDC and STC. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM11: minor cleanup, mostly ITR commentsDavid Brownell2009-12-112-28/+43
| | | | | | | | | | | | | ITR register handling seemed to be giving me problems, so I updated the comments to better say what the code is trying to do ... and to note the preconditions (one of which seems to be an issue) as listed in the ARM1136 TRM. Also removed the unused "ARM11_TAP_DEFAULT" from the ITR scan code; all the callers already specify an exit path, since this register isn't usable with such vague semantics. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* server: add server_preinit which is called before config file is parsed.Spencer Oliver2009-12-113-3/+14
| | | | | | | This fixes the issue under native win32 of the socket interface not being enabled (via WSAStartup) before init is called from a script. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* build: fix cygwin build warningsSpencer Oliver2009-12-111-1/+1
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* gdb_server: use more local variables in inner loop of fetching packetstiny ↵Øyvind Harboe2009-12-111-31/+73
| | | | | | | | | | | | | | | | | | refactoring to allow optimisation of inner loops Some profiling information for arm7 16MHz GDB load operation shows gdb_get_packet_inner() near the very top. Each sample counts as 0.01 seconds. % cumulative self self total time seconds seconds calls Ts/call Ts/call name 52.91 2.27 2.27 embeddedice_write_dcc 11.89 2.78 0.51 gdb_get_packet_inner 8.86 3.16 0.38 memcpy 3.26 3.30 0.14 idle_thread_main(unsigned int) 3.03 3.43 0.13 cyg_in_cksum Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* gdb_server: make struct gdb_connection privateØyvind Harboe2009-12-112-19/+21
| | | | | | it is only used inside gdb_server.c Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* optimisation: tiny optimisation for embedded iceØyvind Harboe2009-12-111-6/+5
| | | | | | | use two shift operations instead of three to set embedded ice register. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* embedded hosts: optimize common code path for core arm operationsØyvind Harboe2009-12-112-46/+66
| | | | | | | avoid fn call for the if check on whether anything needs to be done. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* anotyer cygwin compile fixDavid Brownell2009-12-101-1/+2
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* zy1000: revc FPGA now worksØyvind Harboe2009-12-102-30/+6
| | | | | | remove kludge code. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ARM: update arm_opcodes.h copyrightDavid Brownell2009-12-091-0/+3
| | | | | | | I neglected to copy Magnus' copyright when I moved several declarations from the ARMv7-M header. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* stellaris: flash protection updates, minor fixesDavid Brownell2009-12-092-68/+119
| | | | | | | | | | | | | | | | | | | | | | | | | Bugfix the read side of flash protection: - read the right register(s)! - handle more than 64K - record the results in the right places - don't display garbage. Partially bugfix the write side: - use 2KB lock regions instead of 1KB pages (!) - validate input range - don't try to _remove_ protection (it's write-once) - #define values we'll need to commit writes. - ... still doesn't handle pages over 64KB mark, or commit writes And minor cleanup and fixes: - get rid of some forward decls - properly locate a doxygen comment - fix some bad indentation - remove superfluous #include - add a new part ID (many are still missing) - make the downloaded algorithm code be read-only Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Comment and doxygen fixesDavid Brownell2009-12-095-30/+25
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ETM: only include oocd_trace.h when tracing enabled.Spencer Oliver2009-12-091-0/+3
| | | | | | Fixes build issue on systems that do not have <termios.h>, eg native win32. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* Fix compilation error with gcc 4.4.1Rafael Campos Las Heras2009-12-081-0/+1
| | | | Signed-off-by: Rafael Campos Las Heras <methril@gmail.com>
* target: remove more exit() callsDavid Brownell2009-12-082-9/+2
| | | | | | | | These were all basically "can't happen" cases ... like having state be corrupted by an alpha particle after the previous check for whether a value was in-range. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: remove needless "extern"sDavid Brownell2009-12-084-24/+8
| | | | | | | | | | Most of these happened to be in the target.h file. Some of those are associated with symbols that could be removed at some point ... e.g. NVP_ASSERT/true and its sibling NVP_DEASSERT/false. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>