summaryrefslogtreecommitdiff
path: root/tcl
Commit message (Expand)AuthorAgeFilesLines
* Added support for the blinking leds on Floss-JTAG v0.3 and newer.Piotr Esden-Tempski2010-11-301-1/+1
* Updated Floss-JTAG config file to support v0.3 and newer. Also added noeeprom...Piotr Esden-Tempski2010-11-302-1/+29
* FLASH/NOR: rename from spearsmi to stmsmiAntonio Borneo2010-11-232-2/+2
* STR750: Add SMI interface supportAntonio Borneo2010-11-231-0/+12
* TCL/SPEAr: Added Serial flash in board fileAntonio Borneo2010-11-161-0/+4
* TCL scripts: replace "puts" with "echo"Antonio Borneo2010-11-0923-197/+197
* lpc3131: target definitionAndrew Leech2010-11-091-0/+76
* TCL scripts: add support for ST SPEAr310Antonio Borneo2010-11-067-0/+428
* Add EfikaMX smarttop board supportMarek Vasut2010-11-051-0/+9
* CortexA8: Introduce Freescale i.MX51 variantMarek Vasut2010-11-051-0/+51
* imx31pdk: use rclk w/1MHz fallbackØyvind Harboe2010-10-281-0/+17
* Make systesetreq typos read sysresetreq insteadPeter Stuge2010-10-251-1/+1
* Remove srst_pulls_trst from LPC1768 targetPeter Stuge2010-10-251-3/+0
* swj-dp.tcl (SWD infrastructure #1)David Brownell2010-10-103-1/+44
* TCL scripts: fix ocd_mem2array/mem2arrayAntonio Borneo2010-09-281-1/+1
* Fix omap3_dbginit to write to physical memory.Zachary T Welch2010-09-261-1/+1
* TCL scripts: collect duplicated proceduresAntonio Borneo2010-09-214-35/+25
* tcl: remove incomplete unused tcl fileØyvind Harboe2010-09-201-24/+0
* AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.Karl Kurbjun2010-09-203-82/+221
* board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013Takács Áron2010-09-142-1/+20
* cortex m3: add cortex_m3 reset_config cmdSpencer Oliver2010-08-311-6/+37
* cfg: update Luminary config filesSpencer Oliver2010-08-319-105/+36
* imx35pdk: fix clock and reset delaysØyvind Harboe2010-08-192-0/+5
* mcb1700: Keil MCB1700 w/1768 config scriptØyvind Harboe2010-08-172-12/+79
* update more Stellaris EK board commentsDavid Brownell2010-08-162-0/+4
* Update comments for some Stellaris EK boards.David Brownell2010-08-162-1/+3
* avr32: basic target scriptOleksandr Tymoshenko2010-08-151-0/+18
* at32ap7000 config fileDavid Brownell2010-08-151-0/+16
* lpc1768: turn down the jtag clockØyvind Harboe2010-08-131-7/+9
* Added Lisa/L script as a target board.Piotr Esden-Tempski2010-08-131-0/+7
* Added support for Lisa/L builtin JTAG interface.Piotr Esden-Tempski2010-08-131-0/+11
* at91cap7a-stk-sdram.cfg: faster resetØyvind Harboe2010-08-121-5/+5
* DM36x: Set OSCDIV dividerThomas Koeller2010-08-121-0/+7
* DM36x: Disable unused SYSCLKsThomas Koeller2010-08-121-1/+20
* DM36x: Use enable bit for PLL pre-dividerThomas Koeller2010-08-121-1/+1
* tcl: remove silly ocd_ prefix to array2mem and mem2arrayØyvind Harboe2010-08-116-15/+15
* board: added at91cap7a stk w/sdram config scriptsØyvind Harboe2010-08-111-0/+165
* config scripts: remove useless reference to OpenOCD docsØyvind Harboe2010-08-1110-30/+0
* cfg: add omapl138 support and da850evm preliminary supportBen Gardiner2010-08-102-0/+76
* Luminary-icdi comment updateDavid Brownell2010-08-031-0/+4
* lpc1768: even if rclk "works", it isn't necessarily the correct clkØyvind Harboe2010-08-021-2/+6
* Support NGX Technologies product NGX ARM USB JTAGPeter Stuge2010-08-011-0/+6
* Remove srst_pulls_trst from LPC2148 targetPeter Stuge2010-08-011-1/+1
* lpc7168: make flash available upon reset initØyvind Harboe2010-07-301-0/+19
* cfg: add Amontec JTAGkey2p interface config (Issue #26)Spencer Oliver2010-07-191-0/+11
* flash: add nuc910 nand driverSpencer Oliver2010-07-191-0/+3
* cfg: update rsc-w910 scriptSpencer Oliver2010-07-191-1/+2
* lm3s811-ek uses generic stellaris target configDavid Brownell2010-07-172-32/+4
* cfg: add Avalue RSC-W910 configSpencer Oliver2010-07-132-0/+89
* at91sam3s* supportOlaf Lüke2010-06-254-36/+76
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-07 15:22:01 +0000