From 54916e30bb8855338e570f657abe5e326a9824fa Mon Sep 17 00:00:00 2001
From: oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Fri, 1 Aug 2008 11:43:01 +0000
Subject: The reset routine now works w/LPC2148 out of the box.

git-svn-id: svn://svn.berlios.de/openocd/trunk@885 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 src/target/target/lpc2148.cfg | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/src/target/target/lpc2148.cfg b/src/target/target/lpc2148.cfg
index 64e65b12..ab339562 100644
--- a/src/target/target/lpc2148.cfg
+++ b/src/target/target/lpc2148.cfg
@@ -2,28 +2,22 @@
 jtag_nsrst_delay 200
 jtag_ntrst_delay 200
 
+# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate 
+# JTAG, power-on reset is not enough, i.e. you need to perform a
+# reset before being able to talk to the LPC2148, attach is not
+# possible.
+
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
 
-#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
-jtag_reset 1 1
-jtag_reset 0 0
-
 #jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag_device 4 0x1 0xf 0xe
 
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
 target arm7tdmi little 0 arm7tdmi-s_r4
 
-
 target_script 0 reset event/lpc2148_reset.script
 
 working_area 0 0x40000000 0x4000 nobackup
 
 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
-- 
cgit v1.2.3